1AR(1) GNU Development Tools AR(1)
2
6 ar - create, modify, and extract from archives
7
9 ar [-X32_64] [-]p[mod] [--plugin name] [--target bfdname] [relpos]
10 [count] archive [member...]
11
13 The GNU ar program creates, modifies, and extracts from archives. An
14 archive is a single file holding a collection of other files in a
15 structure that makes it possible to retrieve the original individual
16 files (called members of the archive).
17 The original files' contents, mode (permissions), timestamp, owner, and
19 group are preserved in the archive, and can be restored on extraction.
20 GNU ar can maintain archives whose members have names of any length;
22 however, depending on how ar is configured on your system, a limit on
23 member-name length may be imposed for compatibility with archive
24 formats maintained with other tools. If it exists, the limit is often
25 15 characters (typical of formats related to a.out) or 16 characters
26 (typical of formats related to coff).
27 ar is considered a binary utility because archives of this sort are
29 most often used as libraries holding commonly needed subroutines.
30 ar creates an index to the symbols defined in relocatable object
32 modules in the archive when you specify the modifier s. Once created,
33 this index is updated in the archive whenever ar makes a change to its
34 contents (save for the q update operation). An archive with such an
35 index speeds up linking to the library, and allows routines in the
36 library to call each other without regard to their placement in the
37 archive.
38 You may use nm -s or nm --print-armap to list this index table. If an
40 archive lacks the table, another form of ar called ranlib can be used
41 to add just the table.
42 GNU ar can optionally create a thin archive, which contains a symbol
44 index and references to the original copies of the member files of the
45 archive. This is useful for building libraries for use within a local
46 build tree, where the relocatable objects are expected to remain
47 available, and copying the contents of each object would only waste
48 time and space.
49 An archive can either be thin or it can be normal. It cannot be both
51 at the same time. Once an archive is created its format cannot be
52 changed without first deleting it and then creating a new archive in
53 its place.
54 Thin archives are also flattened, so that adding one thin archive to
56 another thin archive does not nest it, as would happen with a normal
57 archive. Instead the elements of the first archive are added
58 individually to the second archive.
59 The paths to the elements of the archive are stored relative to the
61 archive itself.
62 GNU ar is designed to be compatible with two different facilities. You
64 can control its activity using command-line options, like the different
65 varieties of ar on Unix systems; or, if you specify the single command-
66 line option -M, you can control it with a script supplied via standard
67 input, like the MRI "librarian" program.
68
70 GNU ar allows you to mix the operation code p and modifier flags mod in
71 any order, within the first command-line argument.
72 If you wish, you may begin the first command-line argument with a dash.
74 The p keyletter specifies what operation to execute; it may be any of
76 the following, but you must specify only one of them:
77 d Delete modules from the archive. Specify the names of modules to
79 be deleted as member...; the archive is untouched if you specify no
80 files to delete.
81 If you specify the v modifier, ar lists each module as it is
83 deleted.
84 m Use this operation to move members in an archive.
86 The ordering of members in an archive can make a difference in how
88 programs are linked using the library, if a symbol is defined in
89 more than one member.
90 If no modifiers are used with "m", any members you name in the
92 member arguments are moved to the end of the archive; you can use
93 the a, b, or i modifiers to move them to a specified place instead.
94 p Print the specified members of the archive, to the standard output
96 file. If the v modifier is specified, show the member name before
97 copying its contents to standard output.
98 If you specify no member arguments, all the files in the archive
100 are printed.
101 q Quick append; Historically, add the files member... to the end of
103 archive, without checking for replacement.
104 The modifiers a, b, and i do not affect this operation; new members
106 are always placed at the end of the archive.
107 The modifier v makes ar list each file as it is appended.
109 Since the point of this operation is speed, implementations of ar
111 have the option of not updating the archive's symbol table if one
112 exists. Too many different systems however assume that symbol
113 tables are always up-to-date, so GNU ar will rebuild the table even
114 with a quick append.
115 Note - GNU ar treats the command qs as a synonym for r - replacing
117 already existing files in the archive and appending new ones at the
118 end.
119 r Insert the files member... into archive (with replacement). This
121 operation differs from q in that any previously existing members
122 are deleted if their names match those being added.
123 If one of the files named in member... does not exist, ar displays
125 an error message, and leaves undisturbed any existing members of
126 the archive matching that name.
127 By default, new members are added at the end of the file; but you
129 may use one of the modifiers a, b, or i to request placement
130 relative to some existing member.
131 The modifier v used with this operation elicits a line of output
133 for each file inserted, along with one of the letters a or r to
134 indicate whether the file was appended (no old member deleted) or
135 replaced.
136 s Add an index to the archive, or update it if it already exists.
138 Note this command is an exception to the rule that there can only
139 be one command letter, as it is possible to use it as either a
140 command or a modifier. In either case it does the same thing.
141 t Display a table listing the contents of archive, or those of the
143 files listed in member... that are present in the archive.
144 Normally only the member name is shown; if you also want to see the
145 modes (permissions), timestamp, owner, group, and size, you can
146 request that by also specifying the v modifier.
147 If you do not specify a member, all files in the archive are
149 listed.
150 If there is more than one file with the same name (say, fie) in an
152 archive (say b.a), ar t b.a fie lists only the first instance; to
153 see them all, you must ask for a complete listing---in our example,
154 ar t b.a.
155 x Extract members (named member) from the archive. You can use the v
157 modifier with this operation, to request that ar list each name as
158 it extracts it.
159 If you do not specify a member, all files in the archive are
161 extracted.
162 Files cannot be extracted from a thin archive.
164 --help
166 Displays the list of command line options supported by ar and then
167 exits.
168 --version
170 Displays the version information of ar and then exits.
171 A number of modifiers (mod) may immediately follow the p keyletter, to
173 specify variations on an operation's behavior:
174 a Add new files after an existing member of the archive. If you use
176 the modifier a, the name of an existing archive member must be
177 present as the relpos argument, before the archive specification.
178 b Add new files before an existing member of the archive. If you use
180 the modifier b, the name of an existing archive member must be
181 present as the relpos argument, before the archive specification.
182 (same as i).
183 c Create the archive. The specified archive is always created if it
185 did not exist, when you request an update. But a warning is issued
186 unless you specify in advance that you expect to create it, by
187 using this modifier.
188 D Operate in deterministic mode. When adding files and the archive
190 index use zero for UIDs, GIDs, timestamps, and use consistent file
191 modes for all files. When this option is used, if ar is used with
192 identical options and identical input files, multiple runs will
193 create identical output files regardless of the input files'
194 owners, groups, file modes, or modification times.
195 If binutils was configured with --enable-deterministic-archives,
197 then this mode is on by default. It can be disabled with the U
198 modifier, below.
199 f Truncate names in the archive. GNU ar will normally permit file
201 names of any length. This will cause it to create archives which
202 are not compatible with the native ar program on some systems. If
203 this is a concern, the f modifier may be used to truncate file
204 names when putting them in the archive.
205 i Insert new files before an existing member of the archive. If you
207 use the modifier i, the name of an existing archive member must be
208 present as the relpos argument, before the archive specification.
209 (same as b).
210 l This modifier is accepted but not used.
212 N Uses the count parameter. This is used if there are multiple
214 entries in the archive with the same name. Extract or delete
215 instance count of the given name from the archive.
216 o Preserve the original dates of members when extracting them. If
218 you do not specify this modifier, files extracted from the archive
219 are stamped with the time of extraction.
220 P Use the full path name when matching names in the archive. GNU ar
222 can not create an archive with a full path name (such archives are
223 not POSIX complaint), but other archive creators can. This option
224 will cause GNU ar to match file names using a complete path name,
225 which can be convenient when extracting a single file from an
226 archive created by another tool.
227 s Write an object-file index into the archive, or update an existing
229 one, even if no other change is made to the archive. You may use
230 this modifier flag either with any operation, or alone. Running ar
231 s on an archive is equivalent to running ranlib on it.
232 S Do not generate an archive symbol table. This can speed up
234 building a large library in several steps. The resulting archive
235 can not be used with the linker. In order to build a symbol table,
236 you must omit the S modifier on the last execution of ar, or you
237 must run ranlib on the archive.
238 T Make the specified archive a thin archive. If it already exists
240 and is a regular archive, the existing members must be present in
241 the same directory as archive.
242 u Normally, ar r... inserts all files listed into the archive. If
244 you would like to insert only those of the files you list that are
245 newer than existing members of the same names, use this modifier.
246 The u modifier is allowed only for the operation r (replace). In
247 particular, the combination qu is not allowed, since checking the
248 timestamps would lose any speed advantage from the operation q.
249 U Do not operate in deterministic mode. This is the inverse of the D
251 modifier, above: added files and the archive index will get their
252 actual UID, GID, timestamp, and file mode values.
253 This is the default unless binutils was configured with
255 --enable-deterministic-archives.
256 v This modifier requests the verbose version of an operation. Many
258 operations display additional information, such as filenames
259 processed, when the modifier v is appended.
260 V This modifier shows the version number of ar.
262 ar ignores an initial option spelt -X32_64, for compatibility with AIX.
264 The behaviour produced by this option is the default for GNU ar. ar
265 does not support any of the other -X options; in particular, it does
266 not support -X32 which is the default for AIX ar.
267 The optional command line switch --plugin name causes ar to load the
269 plugin called name which adds support for more file formats. This
270 option is only available if the toolchain has been built with plugin
271 support enabled.
272 The optional command line switch --target bfdname specifies that the
274 archive members are in an object code format different from your
275 system's default format. See
276 @file
278 Read command-line options from file. The options read are inserted
279 in place of the original @file option. If file does not exist, or
280 cannot be read, then the option will be treated literally, and not
281 removed.
282 Options in file are separated by whitespace. A whitespace
284 character may be included in an option by surrounding the entire
285 option in either single or double quotes. Any character (including
286 a backslash) may be included by prefixing the character to be
287 included with a backslash. The file may itself contain additional
288 @file options; any such options will be processed recursively.
289
291 nm(1), ranlib(1), and the Info entries for binutils.
292
294 Copyright (c) 1991-2016 Free Software Foundation, Inc.
295 Permission is granted to copy, distribute and/or modify this document
297 under the terms of the GNU Free Documentation License, Version 1.3 or
298 any later version published by the Free Software Foundation; with no
299 Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
300 Texts. A copy of the license is included in the section entitled "GNU
301 Free Documentation License".
302binutils-2.27 2016-08-03 AR(1)