1QMICLI(1) User Commands QMICLI(1)
2
3
4
6 qmicli - Control QMI devices
7
9 Usage:
10 lt-qmicli [OPTION...] - Control QMI devices
11
12 Help Options:
13 -h, --help
14 Show help options
15
16 --help-all
17 Show all help options
18
19 --help-dms
20 Show Device Management Service options
21
22 --help-nas
23 Show Network Access Service options
24
25 --help-wds
26 Show Wireless Data Service options
27
28 --help-pbm
29 Show Phonebook Management options
30
31 --help-pdc
32 Show platform device configurations options
33
34 --help-uim
35 Show User Identity Module options
36
37 --help-wms
38 Show Wireless Messaging Service options
39
40 --help-wda
41 Show Wireless Data Administrative options
42
43 --help-voice
44 Show Voice Service options
45
46 DMS options
47
48 --dms-get-ids
49 Get IDs
50
51 --dms-get-capabilities
52 Get capabilities
53
54 --dms-get-manufacturer
55 Get manufacturer
56
57 --dms-get-model
58 Get model
59
60 --dms-get-revision
61 Get revision
62
63 --dms-get-msisdn
64 Get MSISDN
65
66 --dms-get-power-state
67 Get power state
68
69 --dms-uim-set-pin-protection=[(PIN|PIN2),(disable|enable),(current
70 PIN)]
71 Set PIN protection in the UIM
72
73 --dms-uim-verify-pin=[(PIN|PIN2),(current PIN)]
74 Verify PIN
75
76 --dms-uim-unblock-pin=[(PIN|PIN2),(PUK),(new PIN)]
77 Unblock PIN
78
79 --dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)]
80 Change PIN
81
82 --dms-uim-get-pin-status
83 Get PIN status
84
85 --dms-uim-get-iccid
86 Get ICCID
87
88 --dms-uim-get-imsi
89 Get IMSI
90
91 --dms-uim-get-state
92 Get UIM State
93
94 --dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]
95 Get CK Status
96
97 --dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]
98 Disable CK protection
99
100 --dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]
101 Unblock CK
102
103 --dms-get-hardware-revision
104 Get the HW revision
105
106 --dms-get-operating-mode
107 Get the device operating mode
108
109 --dms-set-operating-mode=[(Operating mode)]
110 Set the device operating mode
111
112 --dms-get-time
113 Get the device time
114
115 --dms-get-prl-version
116 Get the PRL version
117
118 --dms-get-activation-state
119 Get the state of the service activation
120
121 --dms-activate-automatic=[Activation Code]
122 Request automatic service activation
123
124 --dms-activate-manual=[SPC,SID,MDN,MIN]
125 Request manual service activation
126
127 --dms-get-user-lock-state
128 Get the state of the user lock
129
130 --dms-set-user-lock-state=[(disable|enable),(current lock code)]
131 Set the state of the user lock
132
133 --dms-set-user-lock-code=[(old lock code),(new lock code)]
134 Change the user lock code
135
136 --dms-read-user-data
137 Read user data
138
139 --dms-write-user-data=[(User data)]
140 Write user data
141
142 --dms-read-eri-file
143 Read ERI file
144
145 --dms-restore-factory-defaults=[(Service Programming Code)]
146 Restore factory defaults
147
148 --dms-validate-service-programming-code=[(Service Programming Code)]
149 Validate the Service Programming Code
150
151 --dms-set-firmware-id
152 Set firmware id
153
154 --dms-get-band-capabilities
155 Get band capabilities
156
157 --dms-get-factory-sku
158 Get factory stock keeping unit
159
160 --dms-list-stored-images
161 List stored images
162
163 --dms-select-stored-image=[modem#,pri#] where # is the index
164 Select stored image
165
166 --dms-delete-stored-image=[modem#|pri#] where # is the index
167 Delete stored image
168
169 --dms-get-firmware-preference
170 Get firmware preference
171
172 --dms-set-firmware-preference=[(fwver),(config),(carrier)]
173 Set firmware preference
174
175 --dms-get-boot-image-download-mode
176 Get boot image download mode
177
178 --dms-set-boot-image-download-mode=[normal|boot-and-recovery]
179 Set boot image download mode
180
181 --dms-get-software-version
182 Get software version
183
184 --dms-set-fcc-authentication
185 Set FCC authentication
186
187 --dms-get-supported-messages
188 Get supported messages
189
190 --dms-hp-change-device-mode=[fastboot]
191 Change device mode (HP specific)
192
193 --dms-swi-get-current-firmware
194 Get Current Firmware (Sierra Wireless specific)
195
196 --dms-reset
197 Reset the service state
198
199 --dms-noop
200 Just allocate or release a DMS client. Use with
201 `--client-no-release-cid' and/or `--client-cid'
202
203 NAS options
204
205 --nas-get-signal-strength
206 Get signal strength
207
208 --nas-get-signal-info
209 Get signal info
210
211 --nas-get-tx-rx-info=[(Radio Interface)]
212 Get TX/RX info
213
214 --nas-get-home-network
215 Get home network
216
217 --nas-get-serving-system
218 Get serving system
219
220 --nas-get-system-info
221 Get system info
222
223 --nas-get-technology-preference
224 Get technology preference
225
226 --nas-get-system-selection-preference
227 Get system selection preference
228
229 --nas-set-system-selection-prefer‐
230 ence=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma]
231 Set system selection preference
232
233 --nas-network-scan
234 Scan networks
235
236 --nas-get-cell-location-info
237 Get Cell Location Info
238
239 --nas-force-network-search
240 Force network search
241
242 --nas-get-operator-name
243 Get operator name data
244
245 --nas-get-lte-cphy-ca-info
246 Get LTE Cphy CA Info
247
248 --nas-get-rf-band-info
249 Get RF Band Info
250
251 --nas-get-supported-messages
252 Get supported messages
253
254 --nas-reset
255 Reset the service state
256
257 --nas-noop
258 Just allocate or release a NAS client. Use with
259 `--client-no-release-cid' and/or `--client-cid'
260
261 WDS options
262
263 --wds-start-network=["key=value,..."]
264 Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile,
265 auth (PAP|CHAP|BOTH), username, password, autoconnect=yes,
266 ip-type (4|6))
267
268 --wds-follow-network
269 Follow the network status until disconnected. Use with
270 `--wds-start-network'
271
272 --wds-stop-network=[Packet data handle] OR [disable-autoconnect]
273 Stop network
274
275 --wds-get-current-settings
276 Get current settings
277
278 --wds-get-packet-service-status
279 Get packet service status
280
281 --wds-get-packet-statistics
282 Get packet statistics
283
284 --wds-get-data-bearer-technology
285 Get data bearer technology
286
287 --wds-get-current-data-bearer-technology
288 Get current data bearer technology
289
290 --wds-go-dormant
291 Make the active data connection go dormant
292
293 --wds-go-active
294 Make the active data connection go active
295
296 --wds-get-dormancy-status
297 Get the dormancy status of the active data connection
298
299 --wds-get-profile-list=[3gpp|3gpp2]
300 Get profile list
301
302 --wds-get-default-settings=[3gpp|3gpp2]
303 Get default settings
304
305 --wds-get-autoconnect-settings
306 Get autoconnect settings
307
308 --wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roam‐
309 ing-allowed|home-only)]]
310 Set autoconnect settings (roaming settings optional)
311
312 --wds-get-supported-messages
313 Get supported messages
314
315 --wds-reset
316 Reset the service state
317
318 --wds-bind-mux-data-port=["key=value,..."]
319 Bind qmux data port to controller device (allowed keys: mux-id,
320 ep-iface-number) to be used with `--client-no-release-cid'
321
322 --wds-noop
323 Just allocate or release a WDS client. Use with
324 `--client-no-release-cid' and/or `--client-cid'
325
326 PBM options
327
328 --pbm-get-all-capabilities
329 Get all phonebook capabilities
330
331 --pbm-noop
332 Just allocate or release a PBM client. Use with
333 `--client-no-release-cid' and/or `--client-cid'
334
335 PDC options
336
337 --pdc-list-configs=[(platform|software)]
338 List all configs
339
340 --pdc-delete-config=[(platform|software),ConfigId]
341 Delete config
342
343 --pdc-activate-config=[(platform|software),ConfigId]
344 Activate config
345
346 --pdc-deactivate-config=[(platform|software),ConfigId]
347 Deactivate config
348
349 --pdc-load-config=[Path to config]
350 Load config to device
351
352 --pdc-noop
353 Just allocate or release a PDC client. Use with
354 `--client-no-release-cid' and/or `--client-cid'
355
356 UIM options
357
358 --uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current
359 PIN)]
360 Set PIN protection
361
362 --uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)]
363 Verify PIN
364
365 --uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)]
366 Unblock PIN
367
368 --uim-change-pin=[(PIN1|PIN2|UPIN),(old PIN),(new PIN)]
369 Change PIN
370
371 --uim-read-transparent=[0xNNNN,0xNNNN,...]
372 Read a transparent file given the file path
373
374 --uim-get-file-attributes=[0xNNNN,0xNNNN,...]
375 Get the attributes of a given file
376
377 --uim-get-card-status
378 Get card status
379
380 --uim-get-supported-messages
381 Get supported messages
382
383 --uim-sim-power-on=[(slot number)]
384 Power on SIM card
385
386 --uim-sim-power-off=[(slot number)]
387 Power off SIM card
388
389 --uim-reset
390 Reset the service state
391
392 --uim-noop
393 Just allocate or release a UIM client. Use with
394 `--client-no-release-cid' and/or `--client-cid'
395
396 WMS options
397
398 --wms-get-supported-messages
399 Get supported messages
400
401 --wms-reset
402 Reset the service state
403
404 --wms-noop
405 Just allocate or release a WMS client. Use with
406 `--client-no-release-cid' and/or `--client-cid'
407
408 WDA options
409
410 --wda-set-data-format=["key=value,..."]
411 Set data format (allowed keys: link-layer-protocol
412 (802-3|raw-ip), ul-protocol (tlp|qc-ncm|mbim|rndis|qmap),
413 dl-protocol (tlp|qc-ncm|mbim|rndis|qmap), dl-datagrams-max-size,
414 dl-max-datagrams, ep-type (undefined|hsusb), ep-iface-number)
415
416 --wda-get-data-format
417 Get data format
418
419 --wda-get-supported-messages
420 Get supported messages
421
422 --wda-noop
423 Just allocate or release a WDA client. Use with
424 `--client-no-release-cid' and/or `--client-cid'
425
426 VOICE options
427
428 --voice-get-config
429 Get Voice service configuration
430
431 --voice-get-supported-messages
432 Get supported messages
433
434 --voice-noop
435 Just allocate or release a VOICE client. Use with
436 `--client-no-release-cid' and/or `--client-cid'
437
438 Application Options:
439 -d, --device=[PATH]
440 Specify device path
441
442 -w, --get-wwan-iface
443 Get the WWAN iface name associated with this control port
444
445 -e, --get-expected-data-format
446 Get the expected data format in the WWAN iface
447
448 -E, --set-expected-data-format=[802-3|raw-ip]
449 Set the expected data format in the WWAN iface
450
451 --get-service-version-info
452 Get service version info
453
454 --device-set-instance-id=[Instance ID]
455 Set instance ID
456
457 --device-open-version-info
458 Run version info check when opening device
459
460 --device-open-sync
461 Run sync operation when opening device
462
463 -p, --device-open-proxy
464 Request to use the 'qmi-proxy' proxy
465
466 --device-open-qmi
467 Open a cdc-wdm device explicitly in QMI mode
468
469 --device-open-mbim
470 Open a cdc-wdm device explicitly in MBIM mode
471
472 --device-open-auto
473 Open a cdc-wdm device in either QMI or MBIM mode (default)
474
475 --device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header]
476 Open device with specific link protocol and QoS flags
477
478 --client-cid=[CID]
479 Use the given CID, don't allocate a new one
480
481 --client-no-release-cid
482 Do not release the CID when exiting
483
484 -v, --verbose
485 Run action with verbose logs, including the debug ones
486
487 --silent
488 Run action with no logs; not even the error/warning ones
489
490 -V, --version
491 Print version
492
493 qmicli 1.18.0 Copyright © 2012-2017 Aleksander Morgado License GPLv2+:
494 GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This
495 is free software: you are free to change and redistribute it. There is
496 NO WARRANTY, to the extent permitted by law.
497
499 The full documentation for qmicli is maintained as a Texinfo manual.
500 If the info and qmicli programs are properly installed at your site,
501 the command
502
503 info qmicli
504
505 should give you access to the complete manual.
506
507
508
509qmicli March 2017 QMICLI(1)