1TIFFDITHER(1)               General Commands Manual              TIFFDITHER(1)
2
3
4

NAME

6       tiffdither - convert a greyscale image to bilevel using dithering
7

SYNOPSIS

9       tiffdither [ options ] input.tif output.tif
10

DESCRIPTION

12       tiffdither converts a single channel 8-bit greyscale image to a bilevel
13       image using Floyd-Steinberg error propagation with thresholding.
14

OPTIONS

16       -c     Specify the compression to use for data written  to  the  output
17              file:  none  for  no compression, packbits for PackBits compres‐
18              sion, lzw for Lempel-Ziv & Welch compression,  zip  for  Deflate
19              compression,  g3 for CCITT Group 3 (T.4) compression, and g4 for
20              CCITT Group 4 (T.6) compression.   By  default  tiffdither  will
21              compress  data  according  to  the  value of the Compression tag
22              found in the source file.
23
24              The CCITT Group 3 and Group 4 compression algorithms can only be
25              used with bilevel data.
26
27              Group  3  compression  can  be  specified  together with several
28              T.4-specific options: 1d  for  1-dimensional  encoding,  2d  for
29              2-dimensional  encoding, and fill to force each encoded scanline
30              to be zero-filled so that the terminating EOL  code  lies  on  a
31              byte  boundary.   Group  3-specific  options  are  specified  by
32              appending a ``:''-separated list to the ``g3'' option; e.g.   -c
33              g3:2d:fill to get 2D-encoded data with byte-aligned EOL codes.
34
35              LZW  compression  can  be  specified  together  with a predictor
36              value.  A predictor value of 2 causes each scanline of the  out‐
37              put  image  to  undergo  horizontal  differencing  before  it is
38              encoded; a value of 1 forces each scanline to be encoded without
39              differencing.  LZW-specific options are specified by appending a
40              ``:''-separated list to the ``lzw'' option; e.g.  -c  lzw:2  for
41              LZW compression with horizontal differencing.
42
43       -f     Specify  the  bit  fill order to use in writing output data.  By
44              default, tiffdither will create a new file with  the  same  fill
45              order as the original.  Specifying -f lsb2msb will force data to
46              be written with the FillOrder tag set  to  LSB2MSB  ,  while  -f
47              msb2lsb will force data to be written with the FillOrder tag set
48              to MSB2LSB .
49
50       -t     Set the threshold value for dithering.  By default the threshold
51              value is 128.
52

NOTES

54       The  dither  algorithm is taken from the tiffmedian(1) program (written
55       by Paul Heckbert).
56

SEE ALSO

58       pal2rgb(1),   fax2tiff(1),    tiffinfo(1),    tiffcp(1),    tiff2bw(1),
59       libtiff(3TIFF)
60
61       Libtiff library home page: http://www.remotesensing.org/libtiff/
62
63
64
65libtiff                       September 20, 2005                 TIFFDITHER(1)
Impressum