1XkbSelectEvents(3)               XKB FUNCTIONS              XkbSelectEvents(3)
2
3
4

NAME

6       XkbSelectEvents  -   Selects  and / or deselects for delivery of one or
7       more Xkb events and has them delivered under all conditions
8

SYNOPSIS

10       Bool  XkbSelectEvents  (Display  *display,  unsigned  int  device_spec,
11              unsigned   long  int  bits_to_change,  unsigned  long  int  val‐
12              ues_for_bits);
13

ARGUMENTS

15       display
16              connection to the X server
17
18       device_spec
19              device ID, or XkbUseCoreKbd
20
21       bits_to_change
22              determines events to be selected / deselected
23
24       values_for_bits
25              1=>select, 0->deselect; for events in bits_to_change
26

DESCRIPTION

28       Xkb events are selected using an event mask, much the  same  as  normal
29       core  X  events  are selected. However, unlike selecting core X events,
30       where you must specify the selection status (on or off) for all  possi‐
31       ble  event types whenever you wish to change the selection criteria for
32       any one event, Xkb allows you to restrict the specification to only the
33       event  types  you  wish  to  change. This means that you do not need to
34       remember the event selection values for all possible  types  each  time
35       you want to change one of them.
36
37       Many  Xkb  event  types  are  generated under several different circum‐
38       stances. When selecting to receive an Xkb event, you may specify either
39       that you want it delivered under all circumstances, or that you want it
40       delivered only for a subset of the possible circumstances.
41
42       You can also deselect an event type that was previously  selected  for,
43       using the same granularity.
44
45       Xkb  provides  two  functions  to  select  and deselect delivery of Xkb
46       events.  XkbSelectEvents allows you to select or deselect  delivery  of
47       more  than  one  Xkb  event  type at once. Events selected using XkbSe‐
48       lectEvents are delivered to your program under all  circumstances  that
49       generate  the  events.  To restrict delivery of an event to a subset of
50       the conditions under which it occurs, use XkbSelectEventDetails. XkbSe‐
51       lectEventDetails only allows you to change the selection conditions for
52       a single event at a time, but it provides a means  of  fine-tuning  the
53       conditions under which the event is delivered.
54
55       This  request  changes  the  Xkb  event selection mask for the keyboard
56       specified by device_spec.
57
58       Each Xkb event that can be selected is represented  by  a  bit  in  the
59       bits_to_change and values_for_bits masks. Only the event selection bits
60       specified by the bits_to_change parameter are affected; any unspecified
61       bits  are  left unchanged. To turn on event selection for an event, set
62       the bit for the event in the bits_to_change parameter and set the  cor‐
63       responding  bit  in  the  values_for_bits  parameter. To turn off event
64       selection for an event, set the bit for the event in the bits_to_change
65       parameter  and  do not set the corresponding bit in the values_for_bits
66       parameter. The valid values for both of these parameters are an  inclu‐
67       sive bitwise OR of the masks shown in Table 1. There is no interface to
68       return your client's current event selection mask. Clients  cannot  set
69       other clients' event selection masks.
70
71       The  X server reports the events defined by Xkb to your client applica‐
72       tion only if you have requested them via a call to  XkbSelectEvents  or
73       XkbSelectEventDetails.  Specify the event types in which you are inter‐
74       ested in a mask.
75
76       Table 1 lists the event mask constants that can be specified  with  the
77       XkbSelectEvents  request and the circumstances in which the mask should
78       be specified.
79
80
81                         Table 1 XkbSelectEvents Mask Constants
82       ───────────────────────────────────────────────────────────────────────────
83       Event Mask                     Value      Notification Wanted
84       ───────────────────────────────────────────────────────────────────────────
85       XkbNewKeyboardNotifyMask       (1L<<0)    Keyboard geometry change
86       XkbMapNotifyMask               (1L<<1)    Keyboard mapping change
87       XkbStateNotifyMask             (1L<<2)    Keyboard state change
88       XkbControlsNotifyMask          (1L<<3)    Keyboard control change
89       XkbIndicatorStateNotifyMask    (1L<<4)    Keyboard indicator state change
90       XkbIndicatorMapNotifyMask      (1L<<5)    Keyboard indicator map change
91       XkbNamesNotifyMask             (1L<<6)    Keyboard name change
92       XkbCompatMapNotifyMask         (1L<<7)    Keyboard compat map change
93       XkbBellNotifyMask              (1L<<8)    Bell
94       XkbActionMessageMask           (1L<<9)    Action message
95       XkbAccessXNotifyMask           (1L<<10)   AccessX features
96       XkbExtensionDeviceNotifyMask   (1L<<11)   Extension device
97       XkbAllEventsMask               (0xFFF)    All Xkb events
98
99       If a bit is not set in the bits_to_change  parameter,  but  the  corre‐
100       sponding bit is set in the values_for_bits parameter, a BadMatch proto‐
101       col  error  results.  If  an  undefined  bit  is  set  in  either   the
102       bits_to_change  or  the  values_for_bits parameter, a BadValue protocol
103       error results.
104
105       All event selection bits are initially zero for clients using  the  Xkb
106       extension.   Once  you  set  some bits, they remain set for your client
107       until you clear them via another call to XkbSelectEvents.
108
109       XkbSelectEvents returns False if the Xkb extension has not been initil‐
110       ialized and True otherwise.
111

RETURN VALUES

113       True           The  XkbSelectEvents  function  returns  True if the Xkb
114                      extension has been initilialized.
115
116       False          The XkbSelectEvents function returns False  if  the  Xkb
117                      extension has not been initilialized.
118

SEE ALSO

120       XkbSelectEventDetails(3), XkbUseCoreKbd(3)
121
122
123
124X Version 11                     libX11 1.6.5               XkbSelectEvents(3)
Impressum