1NETDEVICE(7)               Linux Programmer's Manual              NETDEVICE(7)
2
3
4

NAME

6       netdevice - low-level access to Linux network devices
7

SYNOPSIS

9       #include <sys/ioctl.h>
10       #include <net/if.h>
11

DESCRIPTION

13       This  man page describes the sockets interface which is used to config‐
14       ure network devices.
15
16       Linux supports some standard ioctls to configure network devices.  They
17       can be used on any socket's file descriptor regardless of the family or
18       type.  They pass an ifreq structure:
19
20           struct ifreq {
21               char ifr_name[IFNAMSIZ]; /* Interface name */
22               union {
23                   struct sockaddr ifr_addr;
24                   struct sockaddr ifr_dstaddr;
25                   struct sockaddr ifr_broadaddr;
26                   struct sockaddr ifr_netmask;
27                   struct sockaddr ifr_hwaddr;
28                   short           ifr_flags;
29                   int             ifr_ifindex;
30                   int             ifr_metric;
31                   int             ifr_mtu;
32                   struct ifmap    ifr_map;
33                   char            ifr_slave[IFNAMSIZ];
34                   char            ifr_newname[IFNAMSIZ];
35                   char           *ifr_data;
36               };
37           };
38
39           struct ifconf {
40               int                 ifc_len; /* size of buffer */
41               union {
42                   char           *ifc_buf; /* buffer address */
43                   struct ifreq   *ifc_req; /* array of structures */
44               };
45           };
46
47       Normally, the user specifies which device to affect by setting ifr_name
48       to  the  name of the interface.  All other members of the structure may
49       share memory.
50
51   Ioctls
52       If an ioctl is marked as privileged then using it requires an effective
53       user  ID of 0 or the CAP_NET_ADMIN capability.  If this is not the case
54       EPERM will be returned.
55
56       SIOCGIFNAME
57              Given the ifr_ifindex, return  the  name  of  the  interface  in
58              ifr_name.   This  is  the only ioctl which returns its result in
59              ifr_name.
60
61       SIOCGIFINDEX
62              Retrieve the interface index of the interface into ifr_ifindex.
63
64       SIOCGIFFLAGS, SIOCSIFFLAGS
65              Get or set the active flag word of the device.   ifr_flags  con‐
66              tains a bit mask of the following values:
67
68                                      Device flags
69              IFF_UP            Interface is running.
70              IFF_BROADCAST     Valid broadcast address set.
71              IFF_DEBUG         Internal debugging flag.
72              IFF_LOOPBACK      Interface is a loopback interface.
73              IFF_POINTOPOINT   Interface is a point-to-point link.
74              IFF_RUNNING       Resources allocated.
75              IFF_NOARP         No arp protocol, L2 destination address not
76                                set.
77              IFF_PROMISC       Interface is in promiscuous mode.
78              IFF_NOTRAILERS    Avoid use of trailers.
79              IFF_ALLMULTI      Receive all multicast packets.
80              IFF_MASTER        Master of a load balancing bundle.
81              IFF_SLAVE         Slave of a load balancing bundle.
82              IFF_MULTICAST     Supports multicast
83              IFF_PORTSEL       Is able to select media type via ifmap.
84              IFF_AUTOMEDIA     Auto media selection active.
85              IFF_DYNAMIC       The addresses are lost when the interface
86                                goes down.
87              IFF_LOWER_UP      Driver signals L1 up (since Linux 2.6.17)
88              IFF_DORMANT       Driver signals dormant (since Linux 2.6.17)
89              IFF_ECHO          Echo sent packets (since Linux 2.6.25)
90
91              Setting  the active flag word is a privileged operation, but any
92              process may read it.
93
94       SIOCGIFPFLAGS, SIOCSIFPFLAGS
95              Get or set extended (private) flags for the  device.   ifr_flags
96              contains a bit mask of the following values:
97
98                                      Private flags
99              IFF_802_1Q_VLAN      Interface is 802.1Q VLAN device.
100              IFF_EBRIDGE          Interface is Ethernet bridging device.
101              IFF_SLAVE_INACTIVE   Interface is inactive bonding slave.
102              IFF_MASTER_8023AD    Interface is 802.3ad bonding master.
103              IFF_MASTER_ALB       Interface is balanced-alb bonding master.
104              IFF_BONDING          Interface is a bonding master or slave.
105              IFF_SLAVE_NEEDARP    Interface needs ARPs for validation.
106              IFF_ISATAP           Interface is RFC4214 ISATAP interface.
107
108              Setting  the  extended (private) interface flags is a privileged
109              operation.
110
111       SIOCGIFADDR, SIOCSIFADDR
112              Get or set the address of the device  using  ifr_addr.   Setting
113              the  interface  address is a privileged operation.  For compati‐
114              bility, only AF_INET addresses are accepted or returned.
115
116       SIOCGIFDSTADDR, SIOCSIFDSTADDR
117              Get or set the destination address of  a  point-to-point  device
118              using  ifr_dstaddr.   For  compatibility, only AF_INET addresses
119              are accepted or returned.  Setting the destination address is  a
120              privileged operation.
121
122       SIOCGIFBRDADDR, SIOCSIFBRDADDR
123              Get or set the broadcast address for a device using ifr_brdaddr.
124              For  compatibility,  only  AF_INET  addresses  are  accepted  or
125              returned.   Setting the broadcast address is a privileged opera‐
126              tion.
127
128       SIOCGIFNETMASK, SIOCSIFNETMASK
129              Get or set the network mask for a device using ifr_netmask.  For
130              compatibility,  only AF_INET addresses are accepted or returned.
131              Setting the network mask is a privileged operation.
132
133       SIOCGIFMETRIC, SIOCSIFMETRIC
134              Get or set the metric of the device using ifr_metric.   This  is
135              currently  not  implemented;  it  sets  ifr_metric  to  0 if you
136              attempt to read it and returns EOPNOTSUPP if you attempt to  set
137              it.
138
139       SIOCGIFMTU, SIOCSIFMTU
140              Get  or  set  the  MTU (Maximum Transfer Unit) of a device using
141              ifr_mtu.  Setting the MTU is a  privileged  operation.   Setting
142              the MTU to too small values may cause kernel crashes.
143
144       SIOCGIFHWADDR, SIOCSIFHWADDR
145              Get  or  set  the hardware address of a device using ifr_hwaddr.
146              The hardware address is specified in a struct sockaddr.  sa_fam‐
147              ily  contains  the ARPHRD_* device type, sa_data the L2 hardware
148              address starting from byte 0.  Setting the hardware address is a
149              privileged operation.
150
151       SIOCSIFHWBROADCAST
152              Set  the hardware broadcast address of a device from ifr_hwaddr.
153              This is a privileged operation.
154
155       SIOCGIFMAP, SIOCSIFMAP
156              Get or set the interface's hardware  parameters  using  ifr_map.
157              Setting the parameters is a privileged operation.
158
159                  struct ifmap {
160                      unsigned long   mem_start;
161                      unsigned long   mem_end;
162                      unsigned short  base_addr;
163                      unsigned char   irq;
164                      unsigned char   dma;
165                      unsigned char   port;
166                  };
167
168              The  interpretation of the ifmap structure depends on the device
169              driver and the architecture.
170
171       SIOCADDMULTI, SIOCDELMULTI
172              Add an address to or delete an address from  the  device's  link
173              layer  multicast filters using ifr_hwaddr.  These are privileged
174              operations.  See also packet(7) for an alternative.
175
176       SIOCGIFTXQLEN, SIOCSIFTXQLEN
177              Get or set the transmit queue length of a device using ifr_qlen.
178              Setting the transmit queue length is a privileged operation.
179
180       SIOCSIFNAME
181              Changes  the  name  of  the  interface  specified in ifr_name to
182              ifr_newname.  This is a privileged  operation.   It  is  allowed
183              only when the interface is not up.
184
185       SIOCGIFCONF
186              Return  a  list  of interface (transport layer) addresses.  This
187              currently means only addresses of the AF_INET (IPv4) family  for
188              compatibility.   The  user passes a ifconf structure as argument
189              to the ioctl.  It contains a pointer to an array of ifreq struc‐
190              tures in ifc_req and its length in bytes in ifc_len.  The kernel
191              fills the ifreqs with all current L3  interface  addresses  that
192              are running: ifr_name contains the interface name (eth0:1 etc.),
193              ifr_addr the address.  The kernel returns with the actual length
194              in ifc_len.  If ifc_len is equal to the original length the buf‐
195              fer probably has overflowed and you should retry with  a  bigger
196              buffer  to  get  all  addresses.  When no error occurs the ioctl
197              returns 0; otherwise -1.  Overflow is not an error.
198
199       Most protocols support their own ioctls to configure  protocol-specific
200       interface  options.  See the protocol man pages for a description.  For
201       configuring IP addresses see ip(7).
202
203       In addition  some  devices  support  private  ioctls.   These  are  not
204       described here.
205

NOTES

207       Strictly  speaking,  SIOCGIFCONF  and  the  other ioctls that accept or
208       return only AF_INET socket addresses, are IP  specific  and  belong  in
209       ip(7).
210
211       The  names  of  interfaces  with  no  addresses  or that don't have the
212       IFF_RUNNING flag set can be found via /proc/net/dev.
213
214       Local IPv6 IP addresses can be found via /proc/net or via rtnetlink(7).
215

BUGS

217       glibc 2.1 is missing the ifr_newname macro in <net/if.h>.  Add the fol‐
218       lowing to your program as a workaround:
219
220           #ifndef ifr_newname
221           #define ifr_newname     ifr_ifru.ifru_slave
222           #endif
223

SEE ALSO

225       proc(5), capabilities(7), ip(7), rtnetlink(7)
226

COLOPHON

228       This  page  is  part of release 3.53 of the Linux man-pages project.  A
229       description of the project, and information about reporting  bugs,  can
230       be found at http://www.kernel.org/doc/man-pages/.
231
232
233
234Linux                             2012-04-26                      NETDEVICE(7)
Impressum