1freqset_selinux(8)          SELinux Policy freqset          freqset_selinux(8)
2
3
4

NAME

6       freqset_selinux  -  Security Enhanced Linux Policy for the freqset pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures  the  freqset  processes  via  flexible
11       mandatory access control.
12
13       The  freqset processes execute with the freqset_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep freqset_t
20
21
22

ENTRYPOINTS

24       The  freqset_t  SELinux type can be entered via the freqset_exec_t file
25       type.
26
27       The default entrypoint paths for the freqset_t domain are  the  follow‐
28       ing:
29
30       /usr/lib/enlightenment/modules/cpufreq/linux-gnu-[^/]*/freqset
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       freqset  policy  is very flexible allowing users to setup their freqset
40       processes in as secure a method as possible.
41
42       The following process types are defined for freqset:
43
44       freqset_t
45
46       Note: semanage permissive -a freqset_t can be used to make the  process
47       type  freqset_t  permissive. SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux policy is customizable based on least access required.  freqset
54       policy is extremely flexible and has several booleans that allow you to
55       manipulate  the  policy and run freqset with the tightest access possi‐
56       ble.
57
58
59
60       If you want to deny any process from ptracing or  debugging  any  other
61       processes,  you  must  turn  on  the  deny_ptrace  boolean.  Enabled by
62       default.
63
64       setsebool -P deny_ptrace 1
65
66
67
68       If you want to allow any process  to  mmap  any  file  on  system  with
69       attribute  file_type,  you must turn on the domain_can_mmap_files bool‐
70       ean. Enabled by default.
71
72       setsebool -P domain_can_mmap_files 1
73
74
75
76       If you want to allow all domains write to kmsg_device, while kernel  is
77       executed  with  systemd.log_target=kmsg parameter, you must turn on the
78       domain_can_write_kmsg boolean. Disabled by default.
79
80       setsebool -P domain_can_write_kmsg 1
81
82
83
84       If you want to allow all domains to use other domains file descriptors,
85       you must turn on the domain_fd_use boolean. Enabled by default.
86
87       setsebool -P domain_fd_use 1
88
89
90
91       If  you  want to allow all domains to have the kernel load modules, you
92       must  turn  on  the  domain_kernel_load_modules  boolean.  Disabled  by
93       default.
94
95       setsebool -P domain_kernel_load_modules 1
96
97
98
99       If you want to allow all domains to execute in fips_mode, you must turn
100       on the fips_mode boolean. Enabled by default.
101
102       setsebool -P fips_mode 1
103
104
105
106       If you want to enable reading of urandom for all domains, you must turn
107       on the global_ssp boolean. Disabled by default.
108
109       setsebool -P global_ssp 1
110
111
112

MANAGED FILES

114       The  SELinux  process  type freqset_t can manage files labeled with the
115       following file types.  The paths listed are the default paths for these
116       file types.  Note the processes UID still need to have DAC permissions.
117
118       sysfs_t
119
120            /sys(/.*)?
121
122

FILE CONTEXTS

124       SELinux requires files to have an extended attribute to define the file
125       type.
126
127       You can see the context of a file using the -Z option to ls
128
129       Policy governs the access  confined  processes  have  to  these  files.
130       SELinux  freqset  policy is very flexible allowing users to setup their
131       freqset processes in as secure a method as possible.
132
133       The following file types are defined for freqset:
134
135
136
137       freqset_exec_t
138
139       - Set files with the freqset_exec_t type, if you want to transition  an
140       executable to the freqset_t domain.
141
142
143
144       Note:  File context can be temporarily modified with the chcon command.
145       If you want to permanently change the file context you need to use  the
146       semanage fcontext command.  This will modify the SELinux labeling data‐
147       base.  You will need to use restorecon to apply the labels.
148
149

COMMANDS

151       semanage fcontext can also be used to manipulate default  file  context
152       mappings.
153
154       semanage  permissive  can  also  be used to manipulate whether or not a
155       process type is permissive.
156
157       semanage module can also be used to enable/disable/install/remove  pol‐
158       icy modules.
159
160       semanage boolean can also be used to manipulate the booleans
161
162
163       system-config-selinux is a GUI tool available to customize SELinux pol‐
164       icy settings.
165
166

AUTHOR

168       This manual page was auto-generated using sepolicy manpage .
169
170

SEE ALSO

172       selinux(8), freqset(8), semanage(8),  restorecon(8),  chcon(1),  sepol‐
173       icy(8) , setsebool(8)
174
175
176
177freqset                            19-04-25                 freqset_selinux(8)
Impressum