numad_selinux(8)

1numad_selinux(8)             SELinux Policy numad             numad_selinux(8)
2
3
4

NAME

6       numad_selinux - Security Enhanced Linux Policy for the numad processes
7

DESCRIPTION

9       Security-Enhanced Linux secures the numad processes via flexible manda‐
10       tory access control.
11
12       The numad processes execute with the  numad_t  SELinux  type.  You  can
13       check  if  you have these processes running by executing the ps command
14       with the -Z qualifier.
15
16       For example:
17
18       ps -eZ | grep numad_t
19
20
21

ENTRYPOINTS

23       The numad_t SELinux type can be entered via the numad_exec_t file type.
24
25       The default entrypoint paths for the numad_t domain are the following:
26
27       /usr/bin/numad
28

PROCESS TYPES

30       SELinux defines process types (domains) for each process running on the
31       system
32
33       You can see the context of a process using the -Z option to ps
34
35       Policy  governs  the  access confined processes have to files.  SELinux
36       numad policy is very flexible allowing users to setup their numad  pro‐
37       cesses in as secure a method as possible.
38
39       The following process types are defined for numad:
40
41       numad_t
42
43       Note:  semanage  permissive  -a numad_t can be used to make the process
44       type numad_t permissive. SELinux does not  deny  access  to  permissive
45       process  types, but the AVC (SELinux denials) messages are still gener‐
46       ated.
47
48

BOOLEANS

50       SELinux policy is customizable based on least access  required.   numad
51       policy is extremely flexible and has several booleans that allow you to
52       manipulate the policy and run numad with the tightest access possible.
53
54
55
56       If you want to allow all daemons to write corefiles to /, you must turn
57       on the daemons_dump_core boolean. Disabled by default.
58
59       setsebool -P daemons_dump_core 1
60
61
62
63       If  you  want  to enable cluster mode for daemons, you must turn on the
64       daemons_enable_cluster_mode boolean. Enabled by default.
65
66       setsebool -P daemons_enable_cluster_mode 1
67
68
69
70       If you want to allow all daemons to use tcp wrappers, you must turn  on
71       the daemons_use_tcp_wrapper boolean. Disabled by default.
72
73       setsebool -P daemons_use_tcp_wrapper 1
74
75
76
77       If  you  want to allow all daemons the ability to read/write terminals,
78       you must turn on the daemons_use_tty boolean. Disabled by default.
79
80       setsebool -P daemons_use_tty 1
81
82
83
84       If you want to deny any process from ptracing or  debugging  any  other
85       processes,  you  must  turn  on  the  deny_ptrace  boolean.  Enabled by
86       default.
87
88       setsebool -P deny_ptrace 1
89
90
91
92       If you want to allow any process  to  mmap  any  file  on  system  with
93       attribute  file_type,  you must turn on the domain_can_mmap_files bool‐
94       ean. Enabled by default.
95
96       setsebool -P domain_can_mmap_files 1
97
98
99
100       If you want to allow all domains write to kmsg_device, while kernel  is
101       executed  with  systemd.log_target=kmsg parameter, you must turn on the
102       domain_can_write_kmsg boolean. Disabled by default.
103
104       setsebool -P domain_can_write_kmsg 1
105
106
107
108       If you want to allow all domains to use other domains file descriptors,
109       you must turn on the domain_fd_use boolean. Enabled by default.
110
111       setsebool -P domain_fd_use 1
112
113
114
115       If  you  want to allow all domains to have the kernel load modules, you
116       must  turn  on  the  domain_kernel_load_modules  boolean.  Disabled  by
117       default.
118
119       setsebool -P domain_kernel_load_modules 1
120
121
122
123       If you want to allow all domains to execute in fips_mode, you must turn
124       on the fips_mode boolean. Enabled by default.
125
126       setsebool -P fips_mode 1
127
128
129
130       If you want to enable reading of urandom for all domains, you must turn
131       on the global_ssp boolean. Disabled by default.
132
133       setsebool -P global_ssp 1
134
135
136

MANAGED FILES

138       The SELinux process type numad_t can manage files labeled with the fol‐
139       lowing file types.  The paths listed are the default  paths  for  these
140       file types.  Note the processes UID still need to have DAC permissions.
141
142       cgroup_t
143
144            /sys/fs/cgroup
145
146       cluster_conf_t
147
148            /etc/cluster(/.*)?
149
150       cluster_var_lib_t
151
152            /var/lib/pcsd(/.*)?
153            /var/lib/cluster(/.*)?
154            /var/lib/openais(/.*)?
155            /var/lib/pengine(/.*)?
156            /var/lib/corosync(/.*)?
157            /usr/lib/heartbeat(/.*)?
158            /var/lib/heartbeat(/.*)?
159            /var/lib/pacemaker(/.*)?
160
161       cluster_var_run_t
162
163            /var/run/crm(/.*)?
164            /var/run/cman_.*
165            /var/run/rsctmp(/.*)?
166            /var/run/aisexec.*
167            /var/run/heartbeat(/.*)?
168            /var/run/corosync-qnetd(/.*)?
169            /var/run/corosync-qdevice(/.*)?
170            /var/run/cpglockd.pid
171            /var/run/corosync.pid
172            /var/run/rgmanager.pid
173            /var/run/cluster/rgmanager.sk
174
175       numad_var_log_t
176
177            /var/log/numad.log.*
178
179       numad_var_run_t
180
181            /var/run/numad.pid
182
183       root_t
184
185            /sysroot/ostree/deploy/.*-atomic.*/deploy(/.*)?
186            /
187            /initrd
188
189       sysfs_t
190
191            /sys(/.*)?
192
193

FILE CONTEXTS

195       SELinux requires files to have an extended attribute to define the file
196       type.
197
198       You can see the context of a file using the -Z option to ls
199
200       Policy governs the access  confined  processes  have  to  these  files.
201       SELinux  numad  policy  is  very flexible allowing users to setup their
202       numad processes in as secure a method as possible.
203
204       STANDARD FILE CONTEXT
205
206       SELinux defines the file context types for the numad, if you wanted  to
207       store  files  with  these types in a diffent paths, you need to execute
208       the semanage command  to  sepecify  alternate  labeling  and  then  use
209       restorecon to put the labels on disk.
210
211       semanage fcontext -a -t numad_var_run_t '/srv/mynumad_content(/.*)?'
212       restorecon -R -v /srv/mynumad_content
213
214       Note:  SELinux  often  uses  regular expressions to specify labels that
215       match multiple files.
216
217       The following file types are defined for numad:
218
219
220
221       numad_exec_t
222
223       - Set files with the numad_exec_t type, if you want  to  transition  an
224       executable to the numad_t domain.
225
226
227
228       numad_unit_file_t
229
230       -  Set  files with the numad_unit_file_t type, if you want to treat the
231       files as numad unit content.
232
233
234
235       numad_var_log_t
236
237       - Set files with the numad_var_log_t type, if you  want  to  treat  the
238       data  as  numad  var log data, usually stored under the /var/log direc‐
239       tory.
240
241
242
243       numad_var_run_t
244
245       - Set files with the numad_var_run_t type, if you  want  to  store  the
246       numad files under the /run or /var/run directory.
247
248
249
250       Note:  File context can be temporarily modified with the chcon command.
251       If you want to permanently change the file context you need to use  the
252       semanage fcontext command.  This will modify the SELinux labeling data‐
253       base.  You will need to use restorecon to apply the labels.
254
255

COMMANDS

257       semanage fcontext can also be used to manipulate default  file  context
258       mappings.
259
260       semanage  permissive  can  also  be used to manipulate whether or not a
261       process type is permissive.
262
263       semanage module can also be used to enable/disable/install/remove  pol‐
264       icy modules.
265
266       semanage boolean can also be used to manipulate the booleans
267
268
269       system-config-selinux is a GUI tool available to customize SELinux pol‐
270       icy settings.
271
272

AUTHOR

274       This manual page was auto-generated using sepolicy manpage .
275
276