1GIT-CHERRY-PICK(1) Git Manual GIT-CHERRY-PICK(1)
2
6 git-cherry-pick - Apply the changes introduced by some existing commits
7
9 git cherry-pick [--edit] [-n] [-m parent-number] [-s] [-x] [--ff]
10 [-S[<keyid>]] <commit>...
11 git cherry-pick --continue
12 git cherry-pick --quit
13 git cherry-pick --abort
14
17 Given one or more existing commits, apply the change each one
18 introduces, recording a new commit for each. This requires your working
19 tree to be clean (no modifications from the HEAD commit).
20 When it is not obvious how to apply a change, the following happens:
22 1. The current branch and HEAD pointer stay at the last commit
24 successfully made.
25 2. The CHERRY_PICK_HEAD ref is set to point at the commit that
27 introduced the change that is difficult to apply.
28 3. Paths in which the change applied cleanly are updated both in the
30 index file and in your working tree.
31 4. For conflicting paths, the index file records up to three versions,
33 as described in the "TRUE MERGE" section of git-merge(1). The
34 working tree files will include a description of the conflict
35 bracketed by the usual conflict markers <<<<<<< and >>>>>>>.
36 5. No other modifications are made.
38 See git-merge(1) for some hints on resolving such conflicts.
40
42 <commit>...
43 Commits to cherry-pick. For a more complete list of ways to spell
44 commits, see gitrevisions(7). Sets of commits can be passed but no
45 traversal is done by default, as if the --no-walk option was
46 specified, see git-rev-list(1). Note that specifying a range will
47 feed all <commit>... arguments to a single revision walk (see a
48 later example that uses maint master..next).
49 -e, --edit
51 With this option, git cherry-pick will let you edit the commit
52 message prior to committing.
53 -x
55 When recording the commit, append a line that says "(cherry picked
56 from commit ...)" to the original commit message in order to
57 indicate which commit this change was cherry-picked from. This is
58 done only for cherry picks without conflicts. Do not use this
59 option if you are cherry-picking from your private branch because
60 the information is useless to the recipient. If on the other hand
61 you are cherry-picking between two publicly visible branches (e.g.
62 backporting a fix to a maintenance branch for an older release from
63 a development branch), adding this information can be useful.
64 -r
66 It used to be that the command defaulted to do -x described above,
67 and -r was to disable it. Now the default is not to do -x so this
68 option is a no-op.
69 -m parent-number, --mainline parent-number
71 Usually you cannot cherry-pick a merge because you do not know
72 which side of the merge should be considered the mainline. This
73 option specifies the parent number (starting from 1) of the
74 mainline and allows cherry-pick to replay the change relative to
75 the specified parent.
76 -n, --no-commit
78 Usually the command automatically creates a sequence of commits.
79 This flag applies the changes necessary to cherry-pick each named
80 commit to your working tree and the index, without making any
81 commit. In addition, when this option is used, your index does not
82 have to match the HEAD commit. The cherry-pick is done against the
83 beginning state of your index.
84 This is useful when cherry-picking more than one commits' effect to
86 your index in a row.
87 -s, --signoff
89 Add Signed-off-by line at the end of the commit message. See the
90 signoff option in git-commit(1) for more information.
91 -S[<keyid>], --gpg-sign[=<keyid>]
93 GPG-sign commits. The keyid argument is optional and defaults to
94 the committer identity; if specified, it must be stuck to the
95 option without a space.
96 --ff
98 If the current HEAD is the same as the parent of the cherry-pick’ed
99 commit, then a fast forward to this commit will be performed.
100 --allow-empty
102 By default, cherry-picking an empty commit will fail, indicating
103 that an explicit invocation of git commit --allow-empty is
104 required. This option overrides that behavior, allowing empty
105 commits to be preserved automatically in a cherry-pick. Note that
106 when "--ff" is in effect, empty commits that meet the
107 "fast-forward" requirement will be kept even without this option.
108 Note also, that use of this option only keeps commits that were
109 initially empty (i.e. the commit recorded the same tree as its
110 parent). Commits which are made empty due to a previous commit are
111 dropped. To force the inclusion of those commits use
112 --keep-redundant-commits.
113 --allow-empty-message
115 By default, cherry-picking a commit with an empty message will
116 fail. This option overrides that behavior, allowing commits with
117 empty messages to be cherry picked.
118 --keep-redundant-commits
120 If a commit being cherry picked duplicates a commit already in the
121 current history, it will become empty. By default these redundant
122 commits cause cherry-pick to stop so the user can examine the
123 commit. This option overrides that behavior and creates an empty
124 commit object. Implies --allow-empty.
125 --strategy=<strategy>
127 Use the given merge strategy. Should only be used once. See the
128 MERGE STRATEGIES section in git-merge(1) for details.
129 -X<option>, --strategy-option=<option>
131 Pass the merge strategy-specific option through to the merge
132 strategy. See git-merge(1) for details.
133
135 --continue
136 Continue the operation in progress using the information in
137 .git/sequencer. Can be used to continue after resolving conflicts
138 in a failed cherry-pick or revert.
139 --quit
141 Forget about the current operation in progress. Can be used to
142 clear the sequencer state after a failed cherry-pick or revert.
143 --abort
145 Cancel the operation and return to the pre-sequence state.
146
148 git cherry-pick master
149 Apply the change introduced by the commit at the tip of the master
150 branch and create a new commit with this change.
151 git cherry-pick ..master, git cherry-pick ^HEAD master
153 Apply the changes introduced by all commits that are ancestors of
154 master but not of HEAD to produce new commits.
155 git cherry-pick maint next ^master, git cherry-pick maint master..next
157 Apply the changes introduced by all commits that are ancestors of
158 maint or next, but not master or any of its ancestors. Note that
159 the latter does not mean maint and everything between master and
160 next; specifically, maint will not be used if it is included in
161 master.
162 git cherry-pick master~4 master~2
164 Apply the changes introduced by the fifth and third last commits
165 pointed to by master and create 2 new commits with these changes.
166 git cherry-pick -n master~1 next
168 Apply to the working tree and the index the changes introduced by
169 the second last commit pointed to by master and by the last commit
170 pointed to by next, but do not create any commit with these
171 changes.
172 git cherry-pick --ff ..next
174 If history is linear and HEAD is an ancestor of next, update the
175 working tree and advance the HEAD pointer to match next. Otherwise,
176 apply the changes introduced by those commits that are in next but
177 not HEAD to the current branch, creating a new commit for each new
178 change.
179 git rev-list --reverse master -- README | git cherry-pick -n --stdin
181 Apply the changes introduced by all commits on the master branch
182 that touched README to the working tree and index, so the result
183 can be inspected and made into a single new commit if suitable.
184 The following sequence attempts to backport a patch, bails out because
186 the code the patch applies to has changed too much, and then tries
187 again, this time exercising more care about matching up context lines.
188 $ git cherry-pick topic^ [1m(1)
190 $ git diff [1m(2)
191 $ git reset --merge ORIG_HEAD [1m(3)
192 $ git cherry-pick -Xpatience topic^ [1m(4)
193 1. apply the change that would be shown by git show topic^. In this
196 example, the patch does not apply cleanly, so information about the
197 conflict is written to the index and working tree and no new commit
198 results.
199 2. summarize changes to be reconciled
200 3. cancel the cherry-pick. In other words, return to the
201 pre-cherry-pick state, preserving any local modifications you had in
202 the working tree.
203 4. try to apply the change introduced by topic^ again, spending extra
204 time to avoid mistakes based on incorrectly matching context lines.
205
207 git-revert(1)
208
210 Part of the git(1) suite
211Git 2.18.1 05/14/2019 GIT-CHERRY-PICK(1)