1STTY(1)                          User Commands                         STTY(1)
2
3
4

NAME

6       stty - change and print terminal line settings
7

SYNOPSIS

9       stty [-F DEVICE | --file=DEVICE] [SETTING]...
10       stty [-F DEVICE | --file=DEVICE] [-a|--all]
11       stty [-F DEVICE | --file=DEVICE] [-g|--save]
12

DESCRIPTION

14       Print or change terminal characteristics.
15
16       Mandatory  arguments  to  long  options are mandatory for short options
17       too.
18
19       -a, --all
20              print all current settings in human-readable form
21
22       -g, --save
23              print all current settings in a stty-readable form
24
25       -F, --file=DEVICE
26              open and use the specified DEVICE instead of stdin
27
28       --help display this help and exit
29
30       --version
31              output version information and exit
32
33       Optional - before SETTING indicates negation.   An  *  marks  non-POSIX
34       settings.  The underlying system defines which settings are available.
35
36   Special characters:
37       * discard CHAR
38              CHAR will toggle discarding of output
39
40       eof CHAR
41              CHAR will send an end of file (terminate the input)
42
43       eol CHAR
44              CHAR will end the line
45
46       * eol2 CHAR
47              alternate CHAR for ending the line
48
49       erase CHAR
50              CHAR will erase the last character typed
51
52       intr CHAR
53              CHAR will send an interrupt signal
54
55       kill CHAR
56              CHAR will erase the current line
57
58       * lnext CHAR
59              CHAR will enter the next character quoted
60
61       quit CHAR
62              CHAR will send a quit signal
63
64       * rprnt CHAR
65              CHAR will redraw the current line
66
67       start CHAR
68              CHAR will restart the output after stopping it
69
70       stop CHAR
71              CHAR will stop the output
72
73       susp CHAR
74              CHAR will send a terminal stop signal
75
76       * swtch CHAR
77              CHAR will switch to a different shell layer
78
79       * werase CHAR
80              CHAR will erase the last word typed
81
82   Special settings:
83       N      set the input and output speeds to N bauds
84
85       * cols N
86              tell the kernel that the terminal has N columns
87
88       * columns N
89              same as cols N
90
91       * [-]drain
92              wait for transmission before applying settings (on by default)
93
94       ispeed N
95              set the input speed to N
96
97       * line N
98              use line discipline N
99
100       min N  with -icanon, set N characters minimum for a completed read
101
102       ospeed N
103              set the output speed to N
104
105       * rows N
106              tell the kernel that the terminal has N rows
107
108       * size print the number of rows and columns according to the kernel
109
110       speed  print the terminal speed
111
112       time N with -icanon, set read timeout of N tenths of a second
113
114   Control settings:
115       [-]clocal
116              disable modem control signals
117
118       [-]cread
119              allow input to be received
120
121       * [-]crtscts
122              enable RTS/CTS handshaking
123
124       csN    set character size to N bits, N in [5..8]
125
126       [-]cstopb
127              use two stop bits per character (one with '-')
128
129       [-]hup send a hangup signal when the last process closes the tty
130
131       [-]hupcl
132              same as [-]hup
133
134       [-]parenb
135              generate parity bit in output and expect parity bit in input
136
137       [-]parodd
138              set odd parity (or even parity with '-')
139
140       * [-]cmspar
141              use "stick" (mark/space) parity
142
143   Input settings:
144       [-]brkint
145              breaks cause an interrupt signal
146
147       [-]icrnl
148              translate carriage return to newline
149
150       [-]ignbrk
151              ignore break characters
152
153       [-]igncr
154              ignore carriage return
155
156       [-]ignpar
157              ignore characters with parity errors
158
159       * [-]imaxbel
160              beep and do not flush a full input buffer on a character
161
162       [-]inlcr
163              translate newline to carriage return
164
165       [-]inpck
166              enable input parity checking
167
168       [-]istrip
169              clear high (8th) bit of input characters
170
171       * [-]iutf8
172              assume input characters are UTF-8 encoded
173
174       * [-]iuclc
175              translate uppercase characters to lowercase
176
177       * [-]ixany
178              let any character restart output, not only start character
179
180       [-]ixoff
181              enable sending of start/stop characters
182
183       [-]ixon
184              enable XON/XOFF flow control
185
186       [-]parmrk
187              mark parity errors (with a 255-0-character sequence)
188
189       [-]tandem
190              same as [-]ixoff
191
192   Output settings:
193       * bsN  backspace delay style, N in [0..1]
194
195       * crN  carriage return delay style, N in [0..3]
196
197       * ffN  form feed delay style, N in [0..1]
198
199       * nlN  newline delay style, N in [0..1]
200
201       * [-]ocrnl
202              translate carriage return to newline
203
204       * [-]ofdel
205              use delete characters for fill instead of NUL characters
206
207       * [-]ofill
208              use fill (padding) characters instead of timing for delays
209
210       * [-]olcuc
211              translate lowercase characters to uppercase
212
213       * [-]onlcr
214              translate newline to carriage return-newline
215
216       * [-]onlret
217              newline performs a carriage return
218
219       * [-]onocr
220              do not print carriage returns in the first column
221
222       [-]opost
223              postprocess output
224
225       * tabN horizontal tab delay style, N in [0..3]
226
227       * tabs same as tab0
228
229       * -tabs
230              same as tab3
231
232       * vtN  vertical tab delay style, N in [0..1]
233
234   Local settings:
235       [-]crterase
236              echo erase characters as backspace-space-backspace
237
238       * crtkill
239              kill all line by obeying the echoprt and echoe settings
240
241       * -crtkill
242              kill all line by obeying the echoctl and echok settings
243
244       * [-]ctlecho
245              echo control characters in hat notation ('^c')
246
247       [-]echo
248              echo input characters
249
250       * [-]echoctl
251              same as [-]ctlecho
252
253       [-]echoe
254              same as [-]crterase
255
256       [-]echok
257              echo a newline after a kill character
258
259       * [-]echoke
260              same as [-]crtkill
261
262       [-]echonl
263              echo newline even if not echoing other characters
264
265       * [-]echoprt
266              echo erased characters backward, between '\' and '/'
267
268       * [-]extproc
269              enable "LINEMODE"; useful with high latency links
270
271       * [-]flusho
272              discard output
273
274       [-]icanon
275              enable special characters: erase, kill, werase, rprnt
276
277       [-]iexten
278              enable non-POSIX special characters
279
280       [-]isig
281              enable interrupt, quit, and suspend special characters
282
283       [-]noflsh
284              disable flushing after interrupt and quit special characters
285
286       * [-]prterase
287              same as [-]echoprt
288
289       * [-]tostop
290              stop background jobs that try to write to the terminal
291
292       * [-]xcase
293              with icanon, escape with '\' for uppercase characters
294
295   Combination settings:
296       * [-]LCASE
297              same as [-]lcase
298
299       cbreak same as -icanon
300
301       -cbreak
302              same as icanon
303
304       cooked same  as  brkint ignpar istrip icrnl ixon opost isig icanon, eof
305              and eol characters to their default values
306
307       -cooked
308              same as raw
309
310       crt    same as echoe echoctl echoke
311
312       dec    same as echoe echoctl echoke -ixany intr ^c erase 0177 kill ^u
313
314       * [-]decctlq
315              same as [-]ixany
316
317       ek     erase and kill characters to their default values
318
319       evenp  same as parenb -parodd cs7
320
321       -evenp same as -parenb cs8
322
323       * [-]lcase
324              same as xcase iuclc olcuc
325
326       litout same as -parenb -istrip -opost cs8
327
328       -litout
329              same as parenb istrip opost cs7
330
331       nl     same as -icrnl -onlcr
332
333       -nl    same as icrnl -inlcr -igncr onlcr -ocrnl -onlret
334
335       oddp   same as parenb parodd cs7
336
337       -oddp  same as -parenb cs8
338
339       [-]parity
340              same as [-]evenp
341
342       pass8  same as -parenb -istrip cs8
343
344       -pass8 same as parenb istrip cs7
345
346       raw    same as -ignbrk -brkint -ignpar -parmrk  -inpck  -istrip  -inlcr
347              -igncr  -icrnl  -ixon  -ixoff -icanon -opost -isig -iuclc -ixany
348              -imaxbel -xcase min 1 time 0
349
350       -raw   same as cooked
351
352       sane   same as cread -ignbrk brkint -inlcr -igncr icrnl  icanon  iexten
353              echo  echoe  echok  -echonl  -noflsh -ixoff -iutf8 -iuclc -ixany
354              imaxbel -xcase -olcuc -ocrnl opost -ofill onlcr  -onocr  -onlret
355              nl0  cr0  tab0  bs0 vt0 ff0 isig -tostop -ofdel -echoprt echoctl
356              echoke -extproc -flusho, all special characters to their default
357              values
358
359       Handle  the  tty  line connected to standard input.  Without arguments,
360       prints baud rate, line discipline, and deviations from stty  sane.   In
361       settings,  CHAR  is  taken  literally, or coded as in ^c, 0x37, 0177 or
362       127; special values ^- or undef used to disable special characters.
363

AUTHOR

365       Written by David MacKenzie.
366

REPORTING BUGS

368       GNU coreutils online help: <https://www.gnu.org/software/coreutils/>
369       Report stty translation bugs to <https://translationproject.org/team/>
370
372       Copyright © 2018 Free Software Foundation, Inc.   License  GPLv3+:  GNU
373       GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
374       This  is  free  software:  you  are free to change and redistribute it.
375       There is NO WARRANTY, to the extent permitted by law.
376

SEE ALSO

378       Full documentation at: <https://www.gnu.org/software/coreutils/stty>
379       or available locally via: info '(coreutils) stty invocation'
380
381
382
383GNU coreutils 8.30                 July 2018                           STTY(1)
Impressum