1Term::ANSIColor(3)    User Contributed Perl Documentation   Term::ANSIColor(3)
2
3
4

NAME

6       Term::ANSIColor - Color screen output using ANSI escape sequences
7

SYNOPSIS

9           use Term::ANSIColor;
10           print color('bold blue');
11           print "This text is bold blue.\n";
12           print color('reset');
13           print "This text is normal.\n";
14           print colored("Yellow on magenta.", 'yellow on_magenta'), "\n";
15           print "This text is normal.\n";
16           print colored(['yellow on_magenta'], 'Yellow on magenta.', "\n");
17           print colored(['red on_bright_yellow'], 'Red on bright yellow.', "\n");
18           print colored(['bright_red on_black'], 'Bright red on black.', "\n");
19           print "\n";
20
21           # Map escape sequences back to color names.
22           use Term::ANSIColor 1.04 qw(uncolor);
23           my $names = uncolor('01;31');
24           print join(q{ }, @{$names}), "\n";
25
26           # Strip all color escape sequences.
27           use Term::ANSIColor 2.01 qw(colorstrip);
28           print colorstrip("\e[1mThis is bold\e[0m"), "\n";
29
30           # Determine whether a color is valid.
31           use Term::ANSIColor 2.02 qw(colorvalid);
32           my $valid = colorvalid('blue bold', 'on_magenta');
33           print "Color string is ", $valid ? "valid\n" : "invalid\n";
34
35           # Create new aliases for colors.
36           use Term::ANSIColor 4.00 qw(coloralias);
37           coloralias('alert', 'red');
38           print "Alert is ", coloralias('alert'), "\n";
39           print colored("This is in red.", 'alert'), "\n";
40
41           use Term::ANSIColor qw(:constants);
42           print BOLD, BLUE, "This text is in bold blue.\n", RESET;
43
44           use Term::ANSIColor qw(:constants);
45           {
46               local $Term::ANSIColor::AUTORESET = 1;
47               print BOLD BLUE "This text is in bold blue.\n";
48               print "This text is normal.\n";
49           }
50
51           use Term::ANSIColor 2.00 qw(:pushpop);
52           print PUSHCOLOR RED ON_GREEN "This text is red on green.\n";
53           print PUSHCOLOR BRIGHT_BLUE "This text is bright blue on green.\n";
54           print RESET BRIGHT_BLUE "This text is just bright blue.\n";
55           print POPCOLOR "Back to red on green.\n";
56           print LOCALCOLOR GREEN ON_BLUE "This text is green on blue.\n";
57           print "This text is red on green.\n";
58           {
59               local $Term::ANSIColor::AUTOLOCAL = 1;
60               print ON_BLUE "This text is red on blue.\n";
61               print "This text is red on green.\n";
62           }
63           print POPCOLOR "Back to whatever we started as.\n";
64

DESCRIPTION

66       This module has two interfaces, one through color() and colored() and
67       the other through constants.  It also offers the utility functions
68       uncolor(), colorstrip(), colorvalid(), and coloralias(), which have to
69       be explicitly imported to be used (see "SYNOPSIS").
70
71       See "COMPATIBILITY" for the versions of Term::ANSIColor that introduced
72       particular features and the versions of Perl that included them.
73
74   Supported Colors
75       Terminal emulators that support color divide into three types: ones
76       that support only eight colors, ones that support sixteen, and ones
77       that support 256.  This module provides the ANSI escape codes for all
78       of them.  These colors are referred to as ANSI colors 0 through 7
79       (normal), 8 through 15 (16-color), and 16 through 255 (256-color).
80
81       Unfortunately, interpretation of colors 0 through 7 often depends on
82       whether the emulator supports eight colors or sixteen colors.
83       Emulators that only support eight colors (such as the Linux console)
84       will display colors 0 through 7 with normal brightness and ignore
85       colors 8 through 15, treating them the same as white.  Emulators that
86       support 16 colors, such as gnome-terminal, normally display colors 0
87       through 7 as dim or darker versions and colors 8 through 15 as normal
88       brightness.  On such emulators, the "normal" white (color 7) usually is
89       shown as pale grey, requiring bright white (15) to be used to get a
90       real white color.  Bright black usually is a dark grey color, although
91       some terminals display it as pure black.  Some sixteen-color terminal
92       emulators also treat normal yellow (color 3) as orange or brown, and
93       bright yellow (color 11) as yellow.
94
95       Following the normal convention of sixteen-color emulators, this module
96       provides a pair of attributes for each color.  For every normal color
97       (0 through 7), the corresponding bright color (8 through 15) is
98       obtained by prepending the string "bright_" to the normal color name.
99       For example, "red" is color 1 and "bright_red" is color 9.  The same
100       applies for background colors: "on_red" is the normal color and
101       "on_bright_red" is the bright color.  Capitalize these strings for the
102       constant interface.
103
104       For 256-color emulators, this module additionally provides "ansi0"
105       through "ansi15", which are the same as colors 0 through 15 in sixteen-
106       color emulators but use the 256-color escape syntax, "grey0" through
107       "grey23" ranging from nearly black to nearly white, and a set of RGB
108       colors.  The RGB colors are of the form "rgbRGB" where R, G, and B are
109       numbers from 0 to 5 giving the intensity of red, green, and blue.  The
110       grey and RGB colors are also available as "ansi16" through "ansi255" if
111       you want simple names for all 256 colors.  "on_" variants of all of
112       these colors are also provided.  These colors may be ignored completely
113       on non-256-color terminals or may be misinterpreted and produce random
114       behavior.  Additional attributes such as blink, italic, or bold may not
115       work with the 256-color palette.
116
117       There is unfortunately no way to know whether the current emulator
118       supports more than eight colors, which makes the choice of colors
119       difficult.  The most conservative choice is to use only the regular
120       colors, which are at least displayed on all emulators.  However, they
121       will appear dark in sixteen-color terminal emulators, including most
122       common emulators in UNIX X environments.  If you know the display is
123       one of those emulators, you may wish to use the bright variants
124       instead.  Even better, offer the user a way to configure the colors for
125       a given application to fit their terminal emulator.
126
127   Function Interface
128       The function interface uses attribute strings to describe the colors
129       and text attributes to assign to text.  The recognized non-color
130       attributes are clear, reset, bold, dark, faint, italic, underline,
131       underscore, blink, reverse, and concealed.  Clear and reset (reset to
132       default attributes), dark and faint (dim and saturated), and underline
133       and underscore are equivalent, so use whichever is the most intuitive
134       to you.
135
136       Note that not all attributes are supported by all terminal types, and
137       some terminals may not support any of these sequences.  Dark and faint,
138       italic, blink, and concealed in particular are frequently not
139       implemented.
140
141       The recognized normal foreground color attributes (colors 0 to 7) are:
142
143         black  red  green  yellow  blue  magenta  cyan  white
144
145       The corresponding bright foreground color attributes (colors 8 to 15)
146       are:
147
148         bright_black  bright_red      bright_green  bright_yellow
149         bright_blue   bright_magenta  bright_cyan   bright_white
150
151       The recognized normal background color attributes (colors 0 to 7) are:
152
153         on_black  on_red      on_green  on yellow
154         on_blue   on_magenta  on_cyan   on_white
155
156       The recognized bright background color attributes (colors 8 to 15) are:
157
158         on_bright_black  on_bright_red      on_bright_green  on_bright_yellow
159         on_bright_blue   on_bright_magenta  on_bright_cyan   on_bright_white
160
161       For 256-color terminals, the recognized foreground colors are:
162
163         ansi0 .. ansi255
164         grey0 .. grey23
165
166       plus "rgbRGB" for R, G, and B values from 0 to 5, such as "rgb000" or
167       "rgb515".  Similarly, the recognized background colors are:
168
169         on_ansi0 .. on_ansi255
170         on_grey0 .. on_grey23
171
172       plus "on_rgbRGB" for R, G, and B values from 0 to 5.
173
174       For any of the above listed attributes, case is not significant.
175
176       Attributes, once set, last until they are unset (by printing the
177       attribute "clear" or "reset").  Be careful to do this, or otherwise
178       your attribute will last after your script is done running, and people
179       get very annoyed at having their prompt and typing changed to weird
180       colors.
181
182       color(ATTR[, ATTR ...])
183           color() takes any number of strings as arguments and considers them
184           to be space-separated lists of attributes.  It then forms and
185           returns the escape sequence to set those attributes.  It doesn't
186           print it out, just returns it, so you'll have to print it yourself
187           if you want to.  This is so that you can save it as a string, pass
188           it to something else, send it to a file handle, or do anything else
189           with it that you might care to.  color() throws an exception if
190           given an invalid attribute.
191
192       colored(STRING, ATTR[, ATTR ...])
193       colored(ATTR-REF, STRING[, STRING...])
194           As an aid in resetting colors, colored() takes a scalar as the
195           first argument and any number of attribute strings as the second
196           argument and returns the scalar wrapped in escape codes so that the
197           attributes will be set as requested before the string and reset to
198           normal after the string.  Alternately, you can pass a reference to
199           an array as the first argument, and then the contents of that array
200           will be taken as attributes and color codes and the remainder of
201           the arguments as text to colorize.
202
203           Normally, colored() just puts attribute codes at the beginning and
204           end of the string, but if you set $Term::ANSIColor::EACHLINE to
205           some string, that string will be considered the line delimiter and
206           the attribute will be set at the beginning of each line of the
207           passed string and reset at the end of each line.  This is often
208           desirable if the output contains newlines and you're using
209           background colors, since a background color that persists across a
210           newline is often interpreted by the terminal as providing the
211           default background color for the next line.  Programs like pagers
212           can also be confused by attributes that span lines.  Normally
213           you'll want to set $Term::ANSIColor::EACHLINE to "\n" to use this
214           feature.
215
216       uncolor(ESCAPE)
217           uncolor() performs the opposite translation as color(), turning
218           escape sequences into a list of strings corresponding to the
219           attributes being set by those sequences.  uncolor() will never
220           return "ansi16" through "ansi255", instead preferring the "grey"
221           and "rgb" names (and likewise for "on_ansi16" through
222           "on_ansi255").
223
224       colorstrip(STRING[, STRING ...])
225           colorstrip() removes all color escape sequences from the provided
226           strings, returning the modified strings separately in array context
227           or joined together in scalar context.  Its arguments are not
228           modified.
229
230       colorvalid(ATTR[, ATTR ...])
231           colorvalid() takes attribute strings the same as color() and
232           returns true if all attributes are known and false otherwise.
233
234       coloralias(ALIAS[, ATTR])
235           If ATTR is specified, coloralias() sets up an alias of ALIAS for
236           the standard color ATTR.  From that point forward, ALIAS can be
237           passed into color(), colored(), and colorvalid() and will have the
238           same meaning as ATTR.  One possible use of this facility is to give
239           more meaningful names to the 256-color RGB colors.  Only ASCII
240           alphanumerics, ".", "_", and "-" are allowed in alias names.
241
242           If ATTR is not specified, coloralias() returns the standard color
243           name to which ALIAS is aliased, if any, or undef if ALIAS does not
244           exist.
245
246           This is the same facility used by the ANSI_COLORS_ALIASES
247           environment variable (see "ENVIRONMENT" below) but can be used at
248           runtime, not just when the module is loaded.
249
250           Later invocations of coloralias() with the same ALIAS will override
251           earlier aliases.  There is no way to remove an alias.
252
253           Aliases have no effect on the return value of uncolor().
254
255           WARNING: Aliases are global and affect all callers in the same
256           process.  There is no way to set an alias limited to a particular
257           block of code or a particular object.
258
259   Constant Interface
260       Alternately, if you import ":constants", you can use the following
261       constants directly:
262
263         CLEAR           RESET             BOLD            DARK
264         FAINT           ITALIC            UNDERLINE       UNDERSCORE
265         BLINK           REVERSE           CONCEALED
266
267         BLACK           RED               GREEN           YELLOW
268         BLUE            MAGENTA           CYAN            WHITE
269         BRIGHT_BLACK    BRIGHT_RED        BRIGHT_GREEN    BRIGHT_YELLOW
270         BRIGHT_BLUE     BRIGHT_MAGENTA    BRIGHT_CYAN     BRIGHT_WHITE
271
272         ON_BLACK        ON_RED            ON_GREEN        ON_YELLOW
273         ON_BLUE         ON_MAGENTA        ON_CYAN         ON_WHITE
274         ON_BRIGHT_BLACK ON_BRIGHT_RED     ON_BRIGHT_GREEN ON_BRIGHT_YELLOW
275         ON_BRIGHT_BLUE  ON_BRIGHT_MAGENTA ON_BRIGHT_CYAN  ON_BRIGHT_WHITE
276
277       These are the same as color('attribute') and can be used if you prefer
278       typing:
279
280           print BOLD BLUE ON_WHITE "Text", RESET, "\n";
281
282       to
283
284           print colored ("Text", 'bold blue on_white'), "\n";
285
286       (Note that the newline is kept separate to avoid confusing the terminal
287       as described above since a background color is being used.)
288
289       If you import ":constants256", you can use the following constants
290       directly:
291
292         ANSI0 .. ANSI255
293         GREY0 .. GREY23
294
295         RGBXYZ (for X, Y, and Z values from 0 to 5, like RGB000 or RGB515)
296
297         ON_ANSI0 .. ON_ANSI255
298         ON_GREY0 .. ON_GREY23
299
300         ON_RGBXYZ (for X, Y, and Z values from 0 to 5)
301
302       Note that ":constants256" does not include the other constants, so if
303       you want to mix both, you need to include ":constants" as well.  You
304       may want to explicitly import at least "RESET", as in:
305
306           use Term::ANSIColor 4.00 qw(RESET :constants256);
307
308       When using the constants, if you don't want to have to remember to add
309       the ", RESET" at the end of each print line, you can set
310       $Term::ANSIColor::AUTORESET to a true value.  Then, the display mode
311       will automatically be reset if there is no comma after the constant.
312       In other words, with that variable set:
313
314           print BOLD BLUE "Text\n";
315
316       will reset the display mode afterward, whereas:
317
318           print BOLD, BLUE, "Text\n";
319
320       will not.  If you are using background colors, you will probably want
321       to either use say() (in newer versions of Perl) or print the newline
322       with a separate print statement to avoid confusing the terminal.
323
324       If $Term::ANSIColor::AUTOLOCAL is set (see below), it takes precedence
325       over $Term::ANSIColor::AUTORESET, and the latter is ignored.
326
327       The subroutine interface has the advantage over the constants interface
328       in that only two subroutines are exported into your namespace, versus
329       thirty-eight in the constants interface.  On the flip side, the
330       constants interface has the advantage of better compile time error
331       checking, since misspelled names of colors or attributes in calls to
332       color() and colored() won't be caught until runtime whereas misspelled
333       names of constants will be caught at compile time.  So, pollute your
334       namespace with almost two dozen subroutines that you may not even use
335       that often, or risk a silly bug by mistyping an attribute.  Your
336       choice, TMTOWTDI after all.
337
338   The Color Stack
339       You can import ":pushpop" and maintain a stack of colors using
340       PUSHCOLOR, POPCOLOR, and LOCALCOLOR.  PUSHCOLOR takes the attribute
341       string that starts its argument and pushes it onto a stack of
342       attributes.  POPCOLOR removes the top of the stack and restores the
343       previous attributes set by the argument of a prior PUSHCOLOR.
344       LOCALCOLOR surrounds its argument in a PUSHCOLOR and POPCOLOR so that
345       the color resets afterward.
346
347       If $Term::ANSIColor::AUTOLOCAL is set, each sequence of color constants
348       will be implicitly preceded by LOCALCOLOR.  In other words, the
349       following:
350
351           {
352               local $Term::ANSIColor::AUTOLOCAL = 1;
353               print BLUE "Text\n";
354           }
355
356       is equivalent to:
357
358           print LOCALCOLOR BLUE "Text\n";
359
360       If $Term::ANSIColor::AUTOLOCAL is set, it takes precedence over
361       $Term::ANSIColor::AUTORESET, and the latter is ignored.
362
363       When using PUSHCOLOR, POPCOLOR, and LOCALCOLOR, it's particularly
364       important to not put commas between the constants.
365
366           print PUSHCOLOR BLUE "Text\n";
367
368       will correctly push BLUE onto the top of the stack.
369
370           print PUSHCOLOR, BLUE, "Text\n";    # wrong!
371
372       will not, and a subsequent pop won't restore the correct attributes.
373       PUSHCOLOR pushes the attributes set by its argument, which is normally
374       a string of color constants.  It can't ask the terminal what the
375       current attributes are.
376

DIAGNOSTICS

378       Bad color mapping %s
379           (W) The specified color mapping from ANSI_COLORS_ALIASES is not
380           valid and could not be parsed.  It was ignored.
381
382       Bad escape sequence %s
383           (F) You passed an invalid ANSI escape sequence to uncolor().
384
385       Bareword "%s" not allowed while "strict subs" in use
386           (F) You probably mistyped a constant color name such as:
387
388               $Foobar = FOOBAR . "This line should be blue\n";
389
390           or:
391
392               @Foobar = FOOBAR, "This line should be blue\n";
393
394           This will only show up under use strict (another good reason to run
395           under use strict).
396
397       Cannot alias standard color %s
398           (F) The alias name passed to coloralias() matches a standard color
399           name.  Standard color names cannot be aliased.
400
401       Cannot alias standard color %s in %s
402           (W) The same, but in ANSI_COLORS_ALIASES.  The color mapping was
403           ignored.
404
405       Invalid alias name %s
406           (F) You passed an invalid alias name to coloralias().  Alias names
407           must consist only of alphanumerics, ".", "-", and "_".
408
409       Invalid alias name %s in %s
410           (W) You specified an invalid alias name on the left hand of the
411           equal sign in a color mapping in ANSI_COLORS_ALIASES.  The color
412           mapping was ignored.
413
414       Invalid attribute name %s
415           (F) You passed an invalid attribute name to color(), colored(), or
416           coloralias().
417
418       Invalid attribute name %s in %s
419           (W) You specified an invalid attribute name on the right hand of
420           the equal sign in a color mapping in ANSI_COLORS_ALIASES.  The
421           color mapping was ignored.
422
423       Name "%s" used only once: possible typo
424           (W) You probably mistyped a constant color name such as:
425
426               print FOOBAR "This text is color FOOBAR\n";
427
428           It's probably better to always use commas after constant names in
429           order to force the next error.
430
431       No comma allowed after filehandle
432           (F) You probably mistyped a constant color name such as:
433
434               print FOOBAR, "This text is color FOOBAR\n";
435
436           Generating this fatal compile error is one of the main advantages
437           of using the constants interface, since you'll immediately know if
438           you mistype a color name.
439
440       No name for escape sequence %s
441           (F) The ANSI escape sequence passed to uncolor() contains escapes
442           which aren't recognized and can't be translated to names.
443

ENVIRONMENT

445       ANSI_COLORS_ALIASES
446           This environment variable allows the user to specify custom color
447           aliases that will be understood by color(), colored(), and
448           colorvalid().  None of the other functions will be affected, and no
449           new color constants will be created.  The custom colors are aliases
450           for existing color names; no new escape sequences can be
451           introduced.  Only alphanumerics, ".", "_", and "-" are allowed in
452           alias names.
453
454           The format is:
455
456               ANSI_COLORS_ALIASES='newcolor1=oldcolor1,newcolor2=oldcolor2'
457
458           Whitespace is ignored.
459
460           For example the Solarized <http://ethanschoonover.com/solarized>
461           colors can be mapped with:
462
463               ANSI_COLORS_ALIASES='\
464                   base00=bright_yellow, on_base00=on_bright_yellow,\
465                   base01=bright_green,  on_base01=on_bright_green, \
466                   base02=black,         on_base02=on_black,        \
467                   base03=bright_black,  on_base03=on_bright_black, \
468                   base0=bright_blue,    on_base0=on_bright_blue,   \
469                   base1=bright_cyan,    on_base1=on_bright_cyan,   \
470                   base2=white,          on_base2=on_white,         \
471                   base3=bright_white,   on_base3=on_bright_white,  \
472                   orange=bright_red,    on_orange=on_bright_red,   \
473                   violet=bright_magenta,on_violet=on_bright_magenta'
474
475           This environment variable is read and applied when the
476           Term::ANSIColor module is loaded and is then subsequently ignored.
477           Changes to ANSI_COLORS_ALIASES after the module is loaded will have
478           no effect.  See coloralias() for an equivalent facility that can be
479           used at runtime.
480
481       ANSI_COLORS_DISABLED
482           If this environment variable is set to a true value, all of the
483           functions defined by this module (color(), colored(), and all of
484           the constants not previously used in the program) will not output
485           any escape sequences and instead will just return the empty string
486           or pass through the original text as appropriate.  This is intended
487           to support easy use of scripts using this module on platforms that
488           don't support ANSI escape sequences.
489

COMPATIBILITY

491       Term::ANSIColor was first included with Perl in Perl 5.6.0.
492
493       The uncolor() function and support for ANSI_COLORS_DISABLED were added
494       in Term::ANSIColor 1.04, included in Perl 5.8.0.
495
496       Support for dark was added in Term::ANSIColor 1.08, included in Perl
497       5.8.4.
498
499       The color stack, including the ":pushpop" import tag, PUSHCOLOR,
500       POPCOLOR, LOCALCOLOR, and the $Term::ANSIColor::AUTOLOCAL variable, was
501       added in Term::ANSIColor 2.00, included in Perl 5.10.1.
502
503       colorstrip() was added in Term::ANSIColor 2.01 and colorvalid() was
504       added in Term::ANSIColor 2.02, both included in Perl 5.11.0.
505
506       Support for colors 8 through 15 (the "bright_" variants) was added in
507       Term::ANSIColor 3.00, included in Perl 5.13.3.
508
509       Support for italic was added in Term::ANSIColor 3.02, included in Perl
510       5.17.1.
511
512       Support for colors 16 through 256 (the "ansi", "rgb", and "grey"
513       colors), the ":constants256" import tag, the coloralias() function, and
514       support for the ANSI_COLORS_ALIASES environment variable were added in
515       Term::ANSIColor 4.00, included in Perl 5.17.8.
516
517       $Term::ANSIColor::AUTOLOCAL was changed to take precedence over
518       $Term::ANSIColor::AUTORESET, rather than the other way around, in
519       Term::ANSIColor 4.00, included in Perl 5.17.8.
520
521       "ansi16" through "ansi255", as aliases for the "rgb" and "grey" colors,
522       and the corresponding "on_ansi" names and "ANSI" and "ON_ANSI"
523       constants, were added in Term::ANSIColor 4.06.
524

RESTRICTIONS

526       It would be nice if one could leave off the commas around the constants
527       entirely and just say:
528
529           print BOLD BLUE ON_WHITE "Text\n" RESET;
530
531       but the syntax of Perl doesn't allow this.  You need a comma after the
532       string.  (Of course, you may consider it a bug that commas between all
533       the constants aren't required, in which case you may feel free to
534       insert commas unless you're using $Term::ANSIColor::AUTORESET or
535       PUSHCOLOR/POPCOLOR.)
536
537       For easier debugging, you may prefer to always use the commas when not
538       setting $Term::ANSIColor::AUTORESET or PUSHCOLOR/POPCOLOR so that
539       you'll get a fatal compile error rather than a warning.
540
541       It's not possible to use this module to embed formatting and color
542       attributes using Perl formats.  They replace the escape character with
543       a space (as documented in perlform(1)), resulting in garbled output
544       from the unrecognized attribute.  Even if there were a way around that
545       problem, the format doesn't know that the non-printing escape sequence
546       is zero-length and would incorrectly format the output.  For formatted
547       output using color or other attributes, either use sprintf() instead or
548       use formline() and then add the color or other attributes after
549       formatting and before output.
550

NOTES

552       The codes generated by this module are standard terminal control codes,
553       complying with ECMA-048 and ISO 6429 (generally referred to as "ANSI
554       color" for the color codes).  The non-color control codes (bold, dark,
555       italic, underline, and reverse) are part of the earlier ANSI X3.64
556       standard for control sequences for video terminals and peripherals.
557
558       Note that not all displays are ISO 6429-compliant, or even
559       X3.64-compliant (or are even attempting to be so).  This module will
560       not work as expected on displays that do not honor these escape
561       sequences, such as cmd.exe, 4nt.exe, and command.com under either
562       Windows NT or Windows 2000.  They may just be ignored, or they may
563       display as an ESC character followed by some apparent garbage.
564
565       Jean Delvare provided the following table of different common terminal
566       emulators and their support for the various attributes and others have
567       helped me flesh it out:
568
569                     clear    bold     faint   under    blink   reverse  conceal
570        ------------------------------------------------------------------------
571        xterm         yes      yes      no      yes      yes      yes      yes
572        linux         yes      yes      yes    bold      yes      yes      no
573        rxvt          yes      yes      no      yes  bold/black   yes      no
574        dtterm        yes      yes      yes     yes    reverse    yes      yes
575        teraterm      yes    reverse    no      yes    rev/red    yes      no
576        aixterm      kinda   normal     no      yes      no       yes      yes
577        PuTTY         yes     color     no      yes      no       yes      no
578        Windows       yes      no       no      no       no       yes      no
579        Cygwin SSH    yes      yes      no     color    color    color     yes
580        Terminal.app  yes      yes      no      yes      yes      yes      yes
581
582       Windows is Windows telnet, Cygwin SSH is the OpenSSH implementation
583       under Cygwin on Windows NT, and Mac Terminal is the Terminal
584       application in Mac OS X.  Where the entry is other than yes or no, that
585       emulator displays the given attribute as something else instead.  Note
586       that on an aixterm, clear doesn't reset colors; you have to explicitly
587       set the colors back to what you want.  More entries in this table are
588       welcome.
589
590       Support for code 3 (italic) is rare and therefore not mentioned in that
591       table.  It is not believed to be fully supported by any of the
592       terminals listed, although it's displayed as green in the Linux
593       console, but it is reportedly supported by urxvt.
594
595       Note that codes 6 (rapid blink) and 9 (strike-through) are specified in
596       ANSI X3.64 and ECMA-048 but are not commonly supported by most displays
597       and emulators and therefore aren't supported by this module at the
598       present time.  ECMA-048 also specifies a large number of other
599       attributes, including a sequence of attributes for font changes,
600       Fraktur characters, double-underlining, framing, circling, and
601       overlining.  As none of these attributes are widely supported or
602       useful, they also aren't currently supported by this module.
603
604       Most modern X terminal emulators support 256 colors.  Known to not
605       support those colors are aterm, rxvt, Terminal.app, and TTY/VC.
606

AUTHORS

608       Original idea (using constants) by Zenin, reimplemented using subs by
609       Russ Allbery <rra@cpan.org>, and then combined with the original idea
610       by Russ with input from Zenin.  256-color support is based on work by
611       Kurt Starsinic.  Russ Allbery now maintains this module.
612
613       PUSHCOLOR, POPCOLOR, and LOCALCOLOR were contributed by openmethods.com
614       voice solutions.
615
617       Copyright 1996 Zenin
618
619       Copyright 1996, 1997, 1998, 2000, 2001, 2002, 2005, 2006, 2008, 2009,
620       2010, 2011, 2012, 2013, 2014, 2015, 2016 Russ Allbery <rra@cpan.org>
621
622       Copyright 2012 Kurt Starsinic <kstarsinic@gmail.com>
623
624       This program is free software; you may redistribute it and/or modify it
625       under the same terms as Perl itself.
626

SEE ALSO

628       The CPAN module Term::ExtendedColor provides a different and more
629       comprehensive interface for 256-color emulators that may be more
630       convenient.  The CPAN module Win32::Console::ANSI provides ANSI color
631       (and other escape sequence) support in the Win32 Console environment.
632       The CPAN module Term::Chrome provides a different interface using
633       objects and operator overloading.
634
635       ECMA-048 is available on-line (at least at the time of this writing) at
636       <http://www.ecma-international.org/publications/standards/Ecma-048.htm>.
637
638       ISO 6429 is available from ISO for a charge; the author of this module
639       does not own a copy of it.  Since the source material for ISO 6429 was
640       ECMA-048 and the latter is available for free, there seems little
641       reason to obtain the ISO standard.
642
643       The 256-color control sequences are documented at
644       <http://invisible-island.net/xterm/ctlseqs/ctlseqs.html> (search for
645       256-color).
646
647       The current version of this module is always available from its web
648       site at <https://www.eyrie.org/~eagle/software/ansicolor/>.  It is also
649       part of the Perl core distribution as of 5.6.0.
650
651
652
653perl v5.26.3                      2016-10-28                Term::ANSIColor(3)
Impressum