1ISASET(8)                   System Manager's Manual                  ISASET(8)
2
3
4

NAME

6       isaset - set ISA registers
7
8

SYNOPSIS

10       isaset [-y] addrreg datareg address value [mask] #for I2C-like access
11       isaset [-y] -f address value [mask] #for flat address space
12
13

DESCRIPTION

15       isaset  is  a small helper program to set registers visible through the
16       ISA bus.
17
18

OPTIONS

20       -f     Enable flat address space mode.
21
22       -y     Disable interactive mode. By default, isaset  will  wait  for  a
23              confirmation from the user before messing with the ISA bus. When
24              this flag is used, it will perform the operation directly.  This
25              is mainly meant to be used in scripts.
26
27

OPTIONS (I2C-like access mode)

29       Four  options  must  be  provided  to  isaset. addrreg contains the ISA
30       address of the address register for the chip to probe; datareg contains
31       the  address  of the data register. Both addresses are integers between
32       0x0000 and 0x3FFF. Usually, if the chip's base address is  0x0nn0,  the
33       address  register  is at 0x0nn5 and the data register is at 0x0nn6. The
34       most common base address for hardware monitoring chips is 0x0290.   For
35       Super-I/O chips, address register is typically at 0x2E with data regis‐
36       ter at 0x2F.  The address and value parameters are two integers between
37       0x00  and  0xFF.  isaset will write value value to address address.  An
38       optional mask can be provided as a fifth parameter, preserving unmasked
39       bits at the written location.
40
41

OPTIONS (flat address space mode)

43       In flat mode, two parameters must be provided. address contains the ISA
44       address of the register to write to; it is an  integer  between  0x0000
45       and 0xFFFF. Basically, it is the sum of the chip's base address and the
46       chip register's address. isaset will write value value at this address.
47       An  optional  mask  can  be  provided  as a third parameter, preserving
48       unmasked bits at the written location.
49
50

WARNING

52       Poking around in ISA data space is extremely dangerous.  Running isaset
53       with  random parameters can cause system crashes, data loss, and worse!
54       Be extremely careful when using this program.
55
56

SEE ALSO

58       i2cset(8), isadump(8)
59
60

AUTHOR

62       Mark  D.  Studebaker,  and  the  lm_sensors  group  (http://www.lm-sen
63       sors.org/)
64
65       This  manual  page  was  shamelessly ripped from the i2cset and isadump
66       manual pages by Jean Delvare.
67
68
69
70                                   May 2005                          ISASET(8)
Impressum