1FILECHECK(1) LLVM FILECHECK(1)
2
3
4
6 FileCheck - Flexible pattern matching file verifier
7
9 FileCheck match-filename [--check-prefix=XXX] [--strict-whitespace]
10
12 FileCheck reads two files (one from standard input, and one specified
13 on the command line) and uses one to verify the other. This behavior
14 is particularly useful for the testsuite, which wants to verify that
15 the output of some tool (e.g. llc) contains the expected information
16 (for example, a movsd from esp or whatever is interesting). This is
17 similar to using grep, but it is optimized for matching multiple dif‐
18 ferent inputs in one file in a specific order.
19
20 The match-filename file specifies the file that contains the patterns
21 to match. The file to verify is read from standard input unless the
22 --input-file option is used.
23
25 -help Print a summary of command line options.
26
27 --check-prefix prefix
28 FileCheck searches the contents of match-filename for patterns
29 to match. By default, these patterns are prefixed with
30 "CHECK:". If you'd like to use a different prefix (e.g. because
31 the same input file is checking multiple different tool or
32 options), the --check-prefix argument allows you to specify one
33 or more prefixes to match. Multiple prefixes are useful for
34 tests which might change for different run options, but most
35 lines remain the same.
36
37 --check-prefixes prefix1,prefix2,...
38 An alias of --check-prefix that allows multiple prefixes to be
39 specified as a comma separated list.
40
41 --input-file filename
42 File to check (defaults to stdin).
43
44 --match-full-lines
45 By default, FileCheck allows matches of anywhere on a line. This
46 option will require all positive matches to cover an entire
47 line. Leading and trailing whitespace is ignored, unless
48 --strict-whitespace is also specified. (Note: negative matches
49 from CHECK-NOT are not affected by this option!)
50
51 Passing this option is equivalent to inserting {{^ *}} or {{^}}
52 before, and {{ *$}} or {{$}} after every positive check pattern.
53
54 --strict-whitespace
55 By default, FileCheck canonicalizes input horizontal whitespace
56 (spaces and tabs) which causes it to ignore these differences (a
57 space will match a tab). The --strict-whitespace argument dis‐
58 ables this behavior. End-of-line sequences are canonicalized to
59 UNIX-style \n in all modes.
60
61 --implicit-check-not check-pattern
62 Adds implicit negative checks for the specified patterns between
63 positive checks. The option allows writing stricter tests with‐
64 out stuffing them with CHECK-NOTs.
65
66 For example, "--implicit-check-not warning:" can be useful when
67 testing diagnostic messages from tools that don't have an option
68 similar to clang -verify. With this option FileCheck will verify
69 that input does not contain warnings not covered by any CHECK:
70 patterns.
71
72 -version
73 Show the version number of this program.
74
76 If FileCheck verifies that the file matches the expected contents, it
77 exits with 0. Otherwise, if not, or if an error occurs, it will exit
78 with a non-zero value.
79
81 FileCheck is typically used from LLVM regression tests, being invoked
82 on the RUN line of the test. A simple example of using FileCheck from
83 a RUN line looks like this:
84
85 ; RUN: llvm-as < %s | llc -march=x86-64 | FileCheck %s
86
87 This syntax says to pipe the current file ("%s") into llvm-as, pipe
88 that into llc, then pipe the output of llc into FileCheck. This means
89 that FileCheck will be verifying its standard input (the llc output)
90 against the filename argument specified (the original .ll file speci‐
91 fied by "%s"). To see how this works, let's look at the rest of the
92 .ll file (after the RUN line):
93
94 define void @sub1(i32* %p, i32 %v) {
95 entry:
96 ; CHECK: sub1:
97 ; CHECK: subl
98 %0 = tail call i32 @llvm.atomic.load.sub.i32.p0i32(i32* %p, i32 %v)
99 ret void
100 }
101
102 define void @inc4(i64* %p) {
103 entry:
104 ; CHECK: inc4:
105 ; CHECK: incq
106 %0 = tail call i64 @llvm.atomic.load.add.i64.p0i64(i64* %p, i64 1)
107 ret void
108 }
109
110 Here you can see some "CHECK:" lines specified in comments. Now you
111 can see how the file is piped into llvm-as, then llc, and the machine
112 code output is what we are verifying. FileCheck checks the machine
113 code output to verify that it matches what the "CHECK:" lines specify.
114
115 The syntax of the "CHECK:" lines is very simple: they are fixed strings
116 that must occur in order. FileCheck defaults to ignoring horizontal
117 whitespace differences (e.g. a space is allowed to match a tab) but
118 otherwise, the contents of the "CHECK:" line is required to match some
119 thing in the test file exactly.
120
121 One nice thing about FileCheck (compared to grep) is that it allows
122 merging test cases together into logical groups. For example, because
123 the test above is checking for the "sub1:" and "inc4:" labels, it will
124 not match unless there is a "subl" in between those labels. If it
125 existed somewhere else in the file, that would not count: "grep subl"
126 matches if "subl" exists anywhere in the file.
127
128 The FileCheck -check-prefix option
129 The FileCheck -check-prefix option allows multiple test configurations
130 to be driven from one .ll file. This is useful in many circumstances,
131 for example, testing different architectural variants with llc. Here's
132 a simple example:
133
134 ; RUN: llvm-as < %s | llc -mtriple=i686-apple-darwin9 -mattr=sse41 \
135 ; RUN: | FileCheck %s -check-prefix=X32
136 ; RUN: llvm-as < %s | llc -mtriple=x86_64-apple-darwin9 -mattr=sse41 \
137 ; RUN: | FileCheck %s -check-prefix=X64
138
139 define <4 x i32> @pinsrd_1(i32 %s, <4 x i32> %tmp) nounwind {
140 %tmp1 = insertelement <4 x i32>; %tmp, i32 %s, i32 1
141 ret <4 x i32> %tmp1
142 ; X32: pinsrd_1:
143 ; X32: pinsrd $1, 4(%esp), %xmm0
144
145 ; X64: pinsrd_1:
146 ; X64: pinsrd $1, %edi, %xmm0
147 }
148
149 In this case, we're testing that we get the expected code generation
150 with both 32-bit and 64-bit code generation.
151
152 The CHECK-NEXT: directive
153 Sometimes you want to match lines and would like to verify that matches
154 happen on exactly consecutive lines with no other lines in between
155 them. In this case, you can use "CHECK:" and "CHECK-NEXT:" directives
156 to specify this. If you specified a custom check prefix, just use
157 "<PREFIX>-NEXT:". For example, something like this works as you'd
158 expect:
159
160 define void @t2(<2 x double>* %r, <2 x double>* %A, double %B) {
161 %tmp3 = load <2 x double>* %A, align 16
162 %tmp7 = insertelement <2 x double> undef, double %B, i32 0
163 %tmp9 = shufflevector <2 x double> %tmp3,
164 <2 x double> %tmp7,
165 <2 x i32> < i32 0, i32 2 >
166 store <2 x double> %tmp9, <2 x double>* %r, align 16
167 ret void
168
169 ; CHECK: t2:
170 ; CHECK: movl 8(%esp), %eax
171 ; CHECK-NEXT: movapd (%eax), %xmm0
172 ; CHECK-NEXT: movhpd 12(%esp), %xmm0
173 ; CHECK-NEXT: movl 4(%esp), %eax
174 ; CHECK-NEXT: movapd %xmm0, (%eax)
175 ; CHECK-NEXT: ret
176 }
177
178 "CHECK-NEXT:" directives reject the input unless there is exactly one
179 newline between it and the previous directive. A "CHECK-NEXT:" cannot
180 be the first directive in a file.
181
182 The CHECK-SAME: directive
183 Sometimes you want to match lines and would like to verify that matches
184 happen on the same line as the previous match. In this case, you can
185 use "CHECK:" and "CHECK-SAME:" directives to specify this. If you
186 specified a custom check prefix, just use "<PREFIX>-SAME:".
187
188 "CHECK-SAME:" is particularly powerful in conjunction with "CHECK-NOT:"
189 (described below).
190
191 For example, the following works like you'd expect:
192
193 !0 = !DILocation(line: 5, scope: !1, inlinedAt: !2)
194
195 ; CHECK: !DILocation(line: 5,
196 ; CHECK-NOT: column:
197 ; CHECK-SAME: scope: ![[SCOPE:[0-9]+]]
198
199 "CHECK-SAME:" directives reject the input if there are any newlines
200 between it and the previous directive. A "CHECK-SAME:" cannot be the
201 first directive in a file.
202
203 The CHECK-NOT: directive
204 The "CHECK-NOT:" directive is used to verify that a string doesn't
205 occur between two matches (or before the first match, or after the last
206 match). For example, to verify that a load is removed by a transforma‐
207 tion, a test like this can be used:
208
209 define i8 @coerce_offset0(i32 %V, i32* %P) {
210 store i32 %V, i32* %P
211
212 %P2 = bitcast i32* %P to i8*
213 %P3 = getelementptr i8* %P2, i32 2
214
215 %A = load i8* %P3
216 ret i8 %A
217 ; CHECK: @coerce_offset0
218 ; CHECK-NOT: load
219 ; CHECK: ret i8
220 }
221
222 The CHECK-DAG: directive
223 If it's necessary to match strings that don't occur in a strictly
224 sequential order, "CHECK-DAG:" could be used to verify them between two
225 matches (or before the first match, or after the last match). For exam‐
226 ple, clang emits vtable globals in reverse order. Using CHECK-DAG:, we
227 can keep the checks in the natural order:
228
229 // RUN: %clang_cc1 %s -emit-llvm -o - | FileCheck %s
230
231 struct Foo { virtual void method(); };
232 Foo f; // emit vtable
233 // CHECK-DAG: @_ZTV3Foo =
234
235 struct Bar { virtual void method(); };
236 Bar b;
237 // CHECK-DAG: @_ZTV3Bar =
238
239 CHECK-NOT: directives could be mixed with CHECK-DAG: directives to
240 exclude strings between the surrounding CHECK-DAG: directives. As a
241 result, the surrounding CHECK-DAG: directives cannot be reordered, i.e.
242 all occurrences matching CHECK-DAG: before CHECK-NOT: must not fall
243 behind occurrences matching CHECK-DAG: after CHECK-NOT:. For example,
244
245 ; CHECK-DAG: BEFORE
246 ; CHECK-NOT: NOT
247 ; CHECK-DAG: AFTER
248
249 This case will reject input strings where BEFORE occurs after AFTER.
250
251 With captured variables, CHECK-DAG: is able to match valid topological
252 orderings of a DAG with edges from the definition of a variable to its
253 use. It's useful, e.g., when your test cases need to match different
254 output sequences from the instruction scheduler. For example,
255
256 ; CHECK-DAG: add [[REG1:r[0-9]+]], r1, r2
257 ; CHECK-DAG: add [[REG2:r[0-9]+]], r3, r4
258 ; CHECK: mul r5, [[REG1]], [[REG2]]
259
260 In this case, any order of that two add instructions will be allowed.
261
262 If you are defining and using variables in the same CHECK-DAG: block,
263 be aware that the definition rule can match after its use.
264
265 So, for instance, the code below will pass:
266
267 ; CHECK-DAG: vmov.32 [[REG2:d[0-9]+]][0]
268 ; CHECK-DAG: vmov.32 [[REG2]][1]
269 vmov.32 d0[1]
270 vmov.32 d0[0]
271
272 While this other code, will not:
273
274 ; CHECK-DAG: vmov.32 [[REG2:d[0-9]+]][0]
275 ; CHECK-DAG: vmov.32 [[REG2]][1]
276 vmov.32 d1[1]
277 vmov.32 d0[0]
278
279 While this can be very useful, it's also dangerous, because in the case
280 of register sequence, you must have a strong order (read before write,
281 copy before use, etc). If the definition your test is looking for
282 doesn't match (because of a bug in the compiler), it may match further
283 away from the use, and mask real bugs away.
284
285 In those cases, to enforce the order, use a non-DAG directive between
286 DAG-blocks.
287
288 The CHECK-LABEL: directive
289 Sometimes in a file containing multiple tests divided into logical
290 blocks, one or more CHECK: directives may inadvertently succeed by
291 matching lines in a later block. While an error will usually eventually
292 be generated, the check flagged as causing the error may not actually
293 bear any relationship to the actual source of the problem.
294
295 In order to produce better error messages in these cases, the
296 "CHECK-LABEL:" directive can be used. It is treated identically to a
297 normal CHECK directive except that FileCheck makes an additional
298 assumption that a line matched by the directive cannot also be matched
299 by any other check present in match-filename; this is intended to be
300 used for lines containing labels or other unique identifiers. Conceptu‐
301 ally, the presence of CHECK-LABEL divides the input stream into sepa‐
302 rate blocks, each of which is processed independently, preventing a
303 CHECK: directive in one block matching a line in another block. For
304 example,
305
306 define %struct.C* @C_ctor_base(%struct.C* %this, i32 %x) {
307 entry:
308 ; CHECK-LABEL: C_ctor_base:
309 ; CHECK: mov [[SAVETHIS:r[0-9]+]], r0
310 ; CHECK: bl A_ctor_base
311 ; CHECK: mov r0, [[SAVETHIS]]
312 %0 = bitcast %struct.C* %this to %struct.A*
313 %call = tail call %struct.A* @A_ctor_base(%struct.A* %0)
314 %1 = bitcast %struct.C* %this to %struct.B*
315 %call2 = tail call %struct.B* @B_ctor_base(%struct.B* %1, i32 %x)
316 ret %struct.C* %this
317 }
318
319 define %struct.D* @D_ctor_base(%struct.D* %this, i32 %x) {
320 entry:
321 ; CHECK-LABEL: D_ctor_base:
322
323 The use of CHECK-LABEL: directives in this case ensures that the three
324 CHECK: directives only accept lines corresponding to the body of the
325 @C_ctor_base function, even if the patterns match lines found later in
326 the file. Furthermore, if one of these three CHECK: directives fail,
327 FileCheck will recover by continuing to the next block, allowing multi‐
328 ple test failures to be detected in a single invocation.
329
330 There is no requirement that CHECK-LABEL: directives contain strings
331 that correspond to actual syntactic labels in a source or output lan‐
332 guage: they must simply uniquely match a single line in the file being
333 verified.
334
335 CHECK-LABEL: directives cannot contain variable definitions or uses.
336
337 FileCheck Pattern Matching Syntax
338 All FileCheck directives take a pattern to match. For most uses of
339 FileCheck, fixed string matching is perfectly sufficient. For some
340 things, a more flexible form of matching is desired. To support this,
341 FileCheck allows you to specify regular expressions in matching
342 strings, surrounded by double braces: {{yourregex}}. Because we want
343 to use fixed string matching for a majority of what we do, FileCheck
344 has been designed to support mixing and matching fixed string matching
345 with regular expressions. This allows you to write things like this:
346
347 ; CHECK: movhpd {{[0-9]+}}(%esp), {{%xmm[0-7]}}
348
349 In this case, any offset from the ESP register will be allowed, and any
350 xmm register will be allowed.
351
352 Because regular expressions are enclosed with double braces, they are
353 visually distinct, and you don't need to use escape characters within
354 the double braces like you would in C. In the rare case that you want
355 to match double braces explicitly from the input, you can use something
356 ugly like {{[{][{]}} as your pattern.
357
358 FileCheck Variables
359 It is often useful to match a pattern and then verify that it occurs
360 again later in the file. For codegen tests, this can be useful to
361 allow any register, but verify that that register is used consistently
362 later. To do this, FileCheck allows named variables to be defined and
363 substituted into patterns. Here is a simple example:
364
365 ; CHECK: test5:
366 ; CHECK: notw [[REGISTER:%[a-z]+]]
367 ; CHECK: andw {{.*}}[[REGISTER]]
368
369 The first check line matches a regex %[a-z]+ and captures it into the
370 variable REGISTER. The second line verifies that whatever is in REGIS‐
371 TER occurs later in the file after an "andw". FileCheck variable ref‐
372 erences are always contained in [[ ]] pairs, and their names can be
373 formed with the regex [a-zA-Z][a-zA-Z0-9]*. If a colon follows the
374 name, then it is a definition of the variable; otherwise, it is a use.
375
376 FileCheck variables can be defined multiple times, and uses always get
377 the latest value. Variables can also be used later on the same line
378 they were defined on. For example:
379
380 ; CHECK: op [[REG:r[0-9]+]], [[REG]]
381
382 Can be useful if you want the operands of op to be the same register,
383 and don't care exactly which register it is.
384
385 FileCheck Expressions
386 Sometimes there's a need to verify output which refers line numbers of
387 the match file, e.g. when testing compiler diagnostics. This intro‐
388 duces a certain fragility of the match file structure, as "CHECK:"
389 lines contain absolute line numbers in the same file, which have to be
390 updated whenever line numbers change due to text addition or deletion.
391
392 To support this case, FileCheck allows using [[@LINE]], [[@LINE+<off‐
393 set>]], [[@LINE-<offset>]] expressions in patterns. These expressions
394 expand to a number of the line where a pattern is located (with an
395 optional integer offset).
396
397 This way match patterns can be put near the relevant test lines and
398 include relative line number references, for example:
399
400 // CHECK: test.cpp:[[@LINE+4]]:6: error: expected ';' after top level declarator
401 // CHECK-NEXT: {{^int a}}
402 // CHECK-NEXT: {{^ \^}}
403 // CHECK-NEXT: {{^ ;}}
404 int a
405
406 Matching Newline Characters
407 To match newline characters in regular expressions the character class
408 [[:space:]] can be used. For example, the following pattern:
409
410 // CHECK: DW_AT_location [DW_FORM_sec_offset] ([[DLOC:0x[0-9a-f]+]]){{[[:space:]].*}}"intd"
411
412 matches output of the form (from llvm-dwarfdump):
413
414 DW_AT_location [DW_FORM_sec_offset] (0x00000233)
415 DW_AT_name [DW_FORM_strp] ( .debug_str[0x000000c9] = "intd")
416
417 letting us set the FileCheck variable DLOC to the desired value
418 0x00000233, extracted from the line immediately preceding "intd".
419
421 Maintained by The LLVM Team (http://llvm.org/).
422
424 2003-2019, LLVM Project
425
426
427
428
4293.9 2019-02-01 FILECHECK(1)