1foo2ddst(1)                 General Commands Manual                foo2ddst(1)
2
3
4
5
6

NAME

8       foo2ddst - Convert Ghostscript pbmraw into a DDST printer stream
9

SYNOPSIS

11       foo2ddst [options] <pbmraw-file >ddst-file
12

DESCRIPTION

14       foo2ddst  converts  Ghostscript  pbmraw to monochrome DDST streams, for
15       driving the Ricoh Aficio SP 112, the Ricoh Aficio  SP  201,  and  other
16       DDST-based printers.
17
18

COMMAND LINE OPTIONS

20   Normal Options
21       These are the options used to select the parameters of a print job that
22       are usually controlled on a per job basis.
23
24       -d duplex
25              Duplex code to send to printer [1].
26              │        │               │
27              │1   off │ 2   long edge │ 3   short edge
28
29       -g xpixxypix
30              Set page dimensions in pixels [5100x6600].
31
32       -m media
33              Media code to send to printer [1].
34
35              ──────────────────────────
36              Media            Code
37              ──────────────────────────
38              plain&recycled    1
39              paper             2
40              thin              3
41              thick             4
42              recycled          5
43
44       -p paper
45              Paper code to send to printer [1].
46
47              ┌──────────────────────┬──────────────────┐
48              │ 1   letter           │  5   A4          │
49              │ 2   legal            │  6   A5          │
50              │ 3   executive        │  7   A6          │
51              │ 4   invoice(5.5x8.5) │  8   B5 JIS      │
52              │                      │ 10   16k 197x273 │
53              │11   16k 184x260      │ 12   16k 195x270 │
54              └──────────────────────┴──────────────────┘
55       -n copies
56              Number of copies [1].
57
58       -r xresxyres
59              Set device resolution in pixels/inch [600x600].
60
61       -s source
62              Source (InputSlot) code to send to printer [7].
63
64              ┌───────────┬────────────┐
65              │1   tray 1 │ 2   manual │
66              └───────────┴────────────┘
67       -t     Draft mode.  Every other pixel is white.
68
69       -T density
70              Print density (1-5).  The default is 3 (medium).
71
72       -J filename
73              Filename string to send to printer.
74
75       -U username
76              Username string to send to printer.
77
78   Printer Tweaking Options
79       These are the options used to customize the operation of foo2ddst for a
80       particular printer.
81
82       -u xoffxyoff
83              Set  the  offset  of  the start of the printable region from the
84              upper left corner, in pixels [0x0].
85
86       -l xoffxyoff
87              Set the offset of the end of the printable region from the lower
88              right corner, in pixels [0x0].
89
90       -L mask
91              Send  logical  clipping amounts implied by -u/-l in the ZjStream
92              [3].
93
94              0   don't send any logical clipping amounts
95              1   only send Y clipping amount
96              2   only send X clipping amount
97              3   send both X and Y clipping amounts
98
99       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk
100              input only.
101
102       -B     BlackClears:  K=1  forces  C,M,Y to 0.  Works with bitcmyk input
103              only.
104
105   Debugging Options
106       These options are used for debugging foo2ddst.
107
108       -S plane
109              Output just a single color plane from a color print and print it
110              on the black plane.  The default is to output all color planes.
111
112              1   Cyan
113              2   Magenta
114              3   Yellow
115              4   Black
116
117       -D level
118              Set Debug level [0].
119
120

EXAMPLES

122       Create a black and white DDST stream:
123
124              gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
125                  -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
126                  -sOutputFile=- - < testpage.ps
127              | foo2ddst -r1200x600 -g10200x6600 -p1 >testpage.zm
128
129

FILES

131       /usr/bin/foo2ddst
132

SEE ALSO

134       foo2ddst-wrapper(1), ddstdecode(1)
135       https://github.com/madlynx/ricoh-sp100
136

AUTHOR

138       Rick Richardson <rick.richardson@comcast.net>
139       http://foo2ddst.rkkda.com/
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
Impressum