1SEMGET(2)                  Linux Programmer's Manual                 SEMGET(2)
2
3
4

NAME

6       semget - get a System V semaphore set identifier
7

SYNOPSIS

9       #include <sys/types.h>
10       #include <sys/ipc.h>
11       #include <sys/sem.h>
12
13       int semget(key_t key, int nsems, int semflg);
14

DESCRIPTION

16       The  semget() system call returns the System V semaphore set identifier
17       associated with the argument key.  It may be used either to obtain  the
18       identifier  of  a previously created semaphore set (when semflg is zero
19       and key does not have the value IPC_PRIVATE), or to create a new set.
20
21       A new set of nsems semaphores is created if key has the value  IPC_PRI‐
22       VATE  or  if  no  existing  semaphore  set  is  associated with key and
23       IPC_CREAT is specified in semflg.
24
25       If semflg specifies both IPC_CREAT and IPC_EXCL  and  a  semaphore  set
26       already  exists  for key, then semget() fails with errno set to EEXIST.
27       (This is analogous to the effect of the combination  O_CREAT  |  O_EXCL
28       for open(2).)
29
30       Upon  creation,  the  least  significant  9 bits of the argument semflg
31       define the permissions (for owner, group and others) for the  semaphore
32       set.   These  bits  have  the same format, and the same meaning, as the
33       mode argument of open(2) (though the execute permissions are not  mean‐
34       ingful  for  semaphores, and write permissions mean permission to alter
35       semaphore values).
36
37       When creating a new semaphore set, semget() initializes the set's asso‐
38       ciated data structure, semid_ds (see semctl(2)), as follows:
39
40              sem_perm.cuid  and sem_perm.uid are set to the effective user ID
41              of the calling process.
42
43              sem_perm.cgid and sem_perm.gid are set to the effective group ID
44              of the calling process.
45
46              The  least  significant  9  bits of sem_perm.mode are set to the
47              least significant 9 bits of semflg.
48
49              sem_nsems is set to the value of nsems.
50
51              sem_otime is set to 0.
52
53              sem_ctime is set to the current time.
54
55       The argument nsems can be 0 (a don't care) when a semaphore set is  not
56       being  created.   Otherwise, nsems must be greater than 0 and less than
57       or equal  to  the  maximum  number  of  semaphores  per  semaphore  set
58       (SEMMSL).
59
60       If the semaphore set already exists, the permissions are verified.
61

RETURN VALUE

63       If successful, the return value will be the semaphore set identifier (a
64       nonnegative integer), otherwise, -1 is returned, with errno  indicating
65       the error.
66

ERRORS

68       On failure, errno will be set to one of the following:
69
70       EACCES A semaphore set exists for key, but the calling process does not
71              have permission to  access  the  set,  and  does  not  have  the
72              CAP_IPC_OWNER  capability in the user namespace that governs its
73              IPC namespace.
74
75       EEXIST IPC_CREAT and IPC_EXCL were specified in semflg, but a semaphore
76              set already exists for key.
77
78       EINVAL nsems  is less than 0 or greater than the limit on the number of
79              semaphores per semaphore set (SEMMSL).
80
81       EINVAL A semaphore set corresponding to key already exists,  but  nsems
82              is larger than the number of semaphores in that set.
83
84       ENOENT No  semaphore  set  exists  for  key  and semflg did not specify
85              IPC_CREAT.
86
87       ENOMEM A semaphore set has to be created but the system does  not  have
88              enough memory for the new data structure.
89
90       ENOSPC A  semaphore  set has to be created but the system limit for the
91              maximum number of semaphore sets (SEMMNI), or  the  system  wide
92              maximum number of semaphores (SEMMNS), would be exceeded.
93

CONFORMING TO

95       SVr4, POSIX.1-2001.
96

NOTES

98       The  inclusion of <sys/types.h> and <sys/ipc.h> isn't required on Linux
99       or by any version of POSIX.  However, some old implementations required
100       the inclusion of these header files, and the SVID also documented their
101       inclusion.  Applications intended to be portable to  such  old  systems
102       may need to include these header files.
103
104       IPC_PRIVATE isn't a flag field but a key_t type.  If this special value
105       is used for key, the system call ignores all but the least  significant
106       9 bits of semflg and creates a new semaphore set (on success).
107
108   Semaphore initialization
109       The  values of the semaphores in a newly created set are indeterminate.
110       (POSIX.1-2001 and POSIX.1-2008 are explicit  on  this  point,  although
111       POSIX.1-2008 notes that a future version of the standard may require an
112       implementation to initialize the semaphores  to  0.)   Although  Linux,
113       like many other implementations, initializes the semaphore values to 0,
114       a portable application cannot rely on this: it should  explicitly  ini‐
115       tialize the semaphores to the desired values.
116
117       Initialization  can be done using semctl(2) SETVAL or SETALL operation.
118       Where multiple peers do not know who will be the  first  to  initialize
119       the set, checking for a nonzero sem_otime in the associated data struc‐
120       ture retrieved by a semctl(2) IPC_STAT operation can be used  to  avoid
121       races.
122
123   Semaphore limits
124       The  following  limits  on  semaphore set resources affect the semget()
125       call:
126
127       SEMMNI System-wide limit on the number of  semaphore  sets.   On  Linux
128              systems  before  version  3.19, the default value for this limit
129              was 128.  Since Linux 3.19, the default  value  is  32,000.   On
130              Linux,  this limit can be read and modified via the fourth field
131              of /proc/sys/kernel/sem.
132
133       SEMMSL Maximum number of semaphores per semaphore ID.  On Linux systems
134              before  version  3.19, the default value for this limit was 250.
135              Since Linux 3.19, the default value is 32,000.  On  Linux,  this
136              limit   can  be  read  and  modified  via  the  first  field  of
137              /proc/sys/kernel/sem.
138
139       SEMMNS System-wide limit on the number of semaphores: policy  dependent
140              (on  Linux,  this  limit can be read and modified via the second
141              field of /proc/sys/kernel/sem).  Note that the number  of  sema‐
142              phores  system-wide is also limited by the product of SEMMSL and
143              SEMMNI.
144

BUGS

146       The name choice IPC_PRIVATE was perhaps unfortunate, IPC_NEW would more
147       clearly show its function.
148

SEE ALSO

150       semctl(2),   semop(2),   ftok(3),   capabilities(7),   sem_overview(7),
151       svipc(7)
152

COLOPHON

154       This page is part of release 4.16 of the Linux  man-pages  project.   A
155       description  of  the project, information about reporting bugs, and the
156       latest    version    of    this    page,    can     be     found     at
157       https://www.kernel.org/doc/man-pages/.
158
159
160
161Linux                             2018-04-30                         SEMGET(2)
Impressum