1Config::Model::Manual::UMsoedrelCCornetarCtioibnoufntiAegdd:v:aPMneocrdeledl(D:3o:)cMuamneunatla:t:iMoondelCreationAdvanced(3)
2
3
4

NAME

6       Config::Model::Manual::ModelCreationAdvanced - Creating a model with
7       advanced features
8

VERSION

10       version 2.133
11

Introduction

13       The page Config::Model::Manual::ModelCreationIntroduction explains what
14       is a configuration tree and a configuration model and how to create a
15       simple configuration model.
16
17       But a configuration model can be more complex and define interactions
18       between elements with the following features:
19
20       ·   Model warp. For instance, Xorg driver options change depending on
21           driver name ("nvidia", "radeon"...)
22
23       ·   Simple computation from other elements (used for upgrades)
24
25       ·   References. For instance, in "Xorg::Device::Radeon",
26           "Monitor-DVI-0" name must refer to one of the monitors declared in
27           "Monitor" section.
28
29       Caveat: Xorg examples are based on Xorg 1.4 and may not be valid for
30       Xorg 1.5 or 1.6
31

Model plugin

33       Config::Model can also use model plugins. Each model can be augmented
34       by model snippets stored into directory "<model_name>.d". All files
35       found there are merged to existing model.
36
37       For instance, this model in file
38       ".../Config/Model/models/Fstab/Fsline.pl":
39
40        {
41           name => "Fstab::Fsline",
42           element => [
43               fs_vfstype => {
44                   type => 'leaf',
45                   value_type => 'enum',
46                   choice => [ qw/ext2 ext3/ ],
47               },
48               fs_mntopts => {
49                   type => 'warped_node',
50                   follow => { 'f1' => '- fs_vfstype' },
51                   rules => [
52                       '$f1 eq \'ext2\'', { 'config_class_name' => 'Fstab::Ext2FsOpt' },
53                       '$f1 eq \'ext3\'', { 'config_class_name' => 'Fstab::Ext3FsOpt' },
54                   ],
55               }
56           ]
57        }
58
59       can be augmented with the content of
60       ".../Config/Model/models/Fstab/Fsline.d/addext4.pl":
61
62        {
63           name => "Fstab::Fsline",
64           element => [
65               fs_vfstype => { choice => [ qw/ext4/ ], },
66               fs_mntopts => {
67                   rules => [
68                       q!$f1 eq 'ext4'!, { 'config_class_name' => 'Fstab::Ext4FsOpt' },
69                   ],
70               },
71           ]
72        } ;
73
74       Then, the merged model will feature "fs_vfstype" with choice "ext2 ext4
75       ext4".  Likewise, "fs_mntopts" will feature rules for the 3
76       filesystems.
77
78       Under the hood, "augment_config_class" in Config::Model method is used
79       to load model snippets.
80

Model warp

82       From a user's point of view, model warp looks like the structure or
83       properties of the configuration is changing (or adapting) dynamically
84       depending on the values being entered. For instance, when changing a
85       driver name from "fglrx" to "radeon", some options disappear from the
86       GUI and some other options pop-in.
87
88       Model warping need not be that spectacular and can have more subtle
89       effect like changing a default value.
90
91       Of course, there's no magic, model warp properties needs to be prepared
92       and declared in the model.
93
94   Warped value
95       Let's start simple with value warp: the properties of a single value is
96       changed dynamically. Let's imagine a configuration file with 2 values:
97       size which can be set to big or small and length whose maximum value is
98       10 when size is small and 50 when size is big. (this may be dumb, but
99       it's for the sake of the example).
100
101       So the basic model without warp is
102
103        element => [
104                     size => { type => 'leaf',
105                               value_type => 'enum',
106                               choice     => ['big','small'],
107                             },
108                     length => { type => 'leaf',
109                                 value_type => 'integer',
110                                 max => '10',
111                               },
112                   ]
113
114       Now we need to declare the relationship between size and length to be
115       able to change dynamically the max property.
116
117       This setup is made of 2 specifications:
118
119       ·   what is the element that triggers the change (called warp master in
120           the doc)
121
122       ·   what is the effect of the warp master change
123
124       The first is done with a declaration of the path to follow to find the
125       warp master (associated to a variable). The second is a set of value
126       properties:
127
128        element => [
129          size => {
130            type => 'leaf',
131            value_type => 'enum',
132            choice     => ['big','small'],
133          },
134
135          length => {
136            type => 'leaf',
137            value_type => 'integer',
138            warp => {                         # change specification
139              follow => {                     # declare what trigger the change
140                size_type => '- size'         # size_type: go 1 level above and fetch
141                                              #            size value
142              },
143              rules  => {                     # how to apply change
144                '$size_type eq "small"' => {  # set max to 10 when size is small
145                   max => 10
146                },
147                '$size_type eq "big" ' => {   # set max to 50 when size is big
148                    max => 50 },
149                },
150              },
151            }
152         ]
153
154   Warp in or warp out an element
155       Here's a real use case scenario from OpenSsh.
156
157       "ssh_config" enables a user to set up a tunnel through ssh. The input
158       of this tunnel can listen to localhost (default) or to other hosts.
159       These other hosts are specified by the bind_adress part of the
160       "LocalForward" parameter.
161
162       But this bind address is ignored if "GatewayPorts" is false (which is
163       the default).
164
165       In order to present only meaningful parameters to the user,
166       bind_address parameter must be hidden when "GatewayPorts" is false and
167       shown when "GatewayPorts" is true.
168
169       Here's the recipe. First create a boolean element for "GatewayPorts":
170
171        GatewayPorts => {
172           type => 'leaf',
173           value_type => 'boolean',
174           upstream_default => 0,
175        },
176
177       And "LocalForward" that provides bind_address parameter:
178
179        LocalForward => {
180          type => 'list',
181          cargo => {
182            type => 'node',
183            config_class_name => 'Ssh::PortForward'
184          },
185          summary => 'Local port forwarding',
186        }
187
188       In "Ssh::PortForward" configuration class, declare bind_address with
189       the warp instructions:
190
191        bind_address => {
192          type => 'leaf',
193          value_type => 'uniline',
194          level => 'hidden',             # by default, is hidden from user
195          warp => {                      # instructions to show bind_address
196            follow => {                  # specify what does trigger the change
197               gp => '- - GatewayPorts'  # gp: go to 2 levels above in tree ('- -') and
198                                         #     fetch GatewayPorts value
199            },
200            rules => [                   # specify how to apply the change triggered by gp
201              '$gp' => {                 # apply change when $gp is true
202                  level => 'normal'      # set level to normal (instead of 'hidden'). This change
203                                         #     will show this parameter in the UI
204              }
205            ]
206          },
207        },
208
209   warped node
210       Sometimes, warping a value line by line is not practical. For instance,
211       in "/etc/fstab" the mount options of a file system change drastically
212       from one file system to another. In this case, it's better to swap a
213       configuration class with another.
214
215       For instance, swap "vfat" mount options with "ext3" mount options when
216       a file system is changed from "vfat" to "ext3".
217
218       Here's how this can be done. First declare the "fstype" parameter:
219
220        fs_vfstype => {
221          type => 'leaf',
222          mandatory => 1,
223          value_type => 'enum',
224          choice => [ 'auto', 'davfs', 'vfat', 'ext2', 'ext3', ] , # etc ...
225        }
226
227       Then declare "mntopts" as a warped_node (not a simple "node")) that
228       uses "fs_vfstype" to swap one config class with another:
229
230        fs_mntopts => {
231          type => 'warped_node', # a shape-shifting node
232          follow => {
233            f1 => '- fs_vfstype' , # use fs_vfstype as a trigger
234          },
235          rules => [
236            # condition     => effect: config class to swap in
237
238            "$f1 eq 'proc'" => { config_class_name => 'Fstab::CommonOptions' },
239            "$f1 eq 'auto'" => { config_class_name => 'Fstab::CommonOptions' },
240            "$f1 eq 'vfat'" => { config_class_name => 'Fstab::CommonOptions' },
241            "$f1 eq 'swap'" => { config_class_name => 'Fstab::SwapOptions'   },
242            "$f1 eq 'ext3'" => { config_class_name => 'Fstab::Ext3FsOpt'     },
243            # etc ...
244          ]
245         }
246

References

Computation and migrations

249   Cascaded warp
250       Config::Model also supports cascaded warps: A warped value is dependent
251       on another value which is itself a warped value.
252

Feedback welcome

254       Feel free to send comments and suggestion about this page at
255
256        config-model-users at lists dot sourceforge dot net.
257

AUTHORS

259       Dominique Dumont <ddumont at cpan.org>
260

AUTHOR

262       Dominique Dumont
263
265       This software is Copyright (c) 2005-2018 by Dominique Dumont.
266
267       This is free software, licensed under:
268
269         The GNU Lesser General Public License, Version 2.1, February 1999
270
271
272
273perl v5.28.1                   Con2f0i1g9:-:0M2o-d0e2l::Manual::ModelCreationAdvanced(3)
Impressum