1Math::PlanePath::HexSpiUrsaelr(3C)ontributed Perl DocumeMnattaht:i:oPnlanePath::HexSpiral(3)
2
6 Math::PlanePath::HexSpiral -- integer points around a hexagonal spiral
7
9 use Math::PlanePath::HexSpiral;
10 my $path = Math::PlanePath::HexSpiral->new;
11 my ($x, $y) = $path->n_to_xy (123);
12
14 This path makes a hexagonal spiral, with points spread out horizontally
15 to fit on a square grid.
16 28 -- 27 -- 26 -- 25 3
18 / \
19 29 13 -- 12 -- 11 24 2
20 / / \ \
21 30 14 4 --- 3 10 23 1
22 / / / \ \ \
23 31 15 5 1 --- 2 9 22 <- Y=0
24 \ \ \ / /
25 32 16 6 --- 7 --- 8 21 -1
26 \ \ /
27 33 17 -- 18 -- 19 -- 20 -2
28 \
29 34 -- 35 ... -3
30 ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
32 -6 -5 -4 -3 -2 -1 X=0 1 2 3 4 5 6
33 Each horizontal gap is 2, so for instance n=1 is at X=0,Y=0 then n=2 is
35 at X=2,Y=0. The diagonals are just 1 across, so n=3 is at X=1,Y=1.
36 Each alternate row is offset from the one above or below. The result
37 is a triangular lattice per "Triangular Lattice" in Math::PlanePath.
38 The octagonal numbers 8,21,40,65, etc 3*k^2-2*k fall on a horizontal
40 straight line at Y=-1. In general straight lines are 3*k^2 + b*k + c.
41 A plain 3*k^2 goes diagonally up to the left, then b is a 1/6 turn
42 anti-clockwise, or clockwise if negative. So b=1 goes horizontally to
43 the left, b=2 diagonally down to the left, b=3 diagonally down to the
44 right, etc.
45 Wider
47 An optional "wider" parameter makes the path wider, stretched along the
48 top and bottom horizontals. For example
49 $path = Math::PlanePath::HexSpiral->new (wider => 2);
51 gives
53 ... 36----35 3
55 \
56 21----20----19----18----17 34 2
57 / \ \
58 22 8---- 7---- 6---- 5 16 33 1
59 / / \ \ \
60 23 9 1---- 2---- 3---- 4 15 32 <- Y=0
61 \ \ / /
62 24 10----11----12----13----14 31 -1
63 \ /
64 25----26----27----28---29----30 -2
65 ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
67 -7 -6 -5 -4 -3 -2 -1 X=0 1 2 3 4 5 6 7
68 The centre horizontal from N=1 is extended by "wider" many extra
70 places, then the path loops around that shape. The starting point N=1
71 is shifted to the left by wider many places to keep the spiral centred
72 on the origin X=0,Y=0. Each horizontal gap is still 2.
73 Each loop is still 6 longer than the previous, since the widening is
75 basically a constant amount added into each loop.
76 N Start
78 The default is to number points starting N=1 as shown above. An
79 optional "n_start" can give a different start with the same shape etc.
80 For example to start at 0,
81 n_start => 0
83 27 26 25 24 3
85 28 12 11 10 23 2
86 29 13 3 2 9 22 1
87 30 14 4 0 1 8 21 <- Y=0
88 31 15 5 6 7 20 ... -1
89 32 16 17 18 19 38 -2
90 33 34 35 36 37 -3
91 ^
92 -6 -5 -4 -3 -2 -1 X=0 1 2 3 4 5 6
93 In this numbering the X axis N=0,1,8,21,etc is the octagonal numbers
95 3*X*(X+1).
96
98 See "FUNCTIONS" in Math::PlanePath for behaviour common to all path
99 classes.
100 "$path = Math::PlanePath::HexSpiral->new ()"
102 "$path = Math::PlanePath::HexSpiral->new (wider => $w)"
103 Create and return a new hex spiral object. An optional "wider"
104 parameter widens the path, it defaults to 0 which is no widening.
105 "($x,$y) = $path->n_to_xy ($n)"
107 Return the X,Y coordinates of point number $n on the path.
108 For "$n < 1" the return is an empty list, it being considered the
110 path starts at 1.
111 "$n = $path->xy_to_n ($x,$y)"
113 Return the point number for coordinates "$x,$y". $x and $y are
114 each rounded to the nearest integer, which has the effect of
115 treating each $n in the path as a square of side 1.
116 Only every second square in the plane has an N, being those where
118 X,Y both odd or both even. If "$x,$y" is a position without an N,
119 ie. one of X,Y odd the other even, then the return is "undef".
120
122 Entries in Sloane's Online Encyclopedia of Integer Sequences related to
123 this path include
124 <http://oeis.org/A056105> (etc)
126 A056105 N on X axis
128 A056106 N on X=Y diagonal
129 A056107 N on North-West diagonal
130 A056108 N on negative X axis
131 A056109 N on South-West diagonal
132 A003215 N on South-East diagonal
133 A063178 total sum N previous row or diagonal
135 A135711 boundary length of N hexagons
136 A135708 grid sticks of N hexagons
137 n_start=0
139 A000567 N on X axis, octagonal numbers
140 A049451 N on X negative axis
141 A049450 N on X=Y diagonal north-east
142 A033428 N on north-west diagonal, 3*k^2
143 A045944 N on south-west diagonal, octagonal numbers second kind
144 A063436 N on WSW slope dX=-3,dY=-1
145 A028896 N on south-east diagonal
146
148 Math::PlanePath, Math::PlanePath::HexSpiralSkewed,
149 Math::PlanePath::HexArms, Math::PlanePath::TriangleSpiral,
150 Math::PlanePath::TriangularHypot
151
153 <http://user42.tuxfamily.org/math-planepath/index.html>
154
156 Copyright 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 Kevin Ryde
157 This file is part of Math-PlanePath.
159 Math-PlanePath is free software; you can redistribute it and/or modify
161 it under the terms of the GNU General Public License as published by
162 the Free Software Foundation; either version 3, or (at your option) any
163 later version.
164 Math-PlanePath is distributed in the hope that it will be useful, but
166 WITHOUT ANY WARRANTY; without even the implied warranty of
167 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
168 General Public License for more details.
169 You should have received a copy of the GNU General Public License along
171 with Math-PlanePath. If not, see <http://www.gnu.org/licenses/>.
172perl v5.28.1 2017-12-03 Math::PlanePath::HexSpiral(3)