1SNMP::Info::Layer2::HP(U3s)er Contributed Perl DocumentatSiNoMnP::Info::Layer2::HP(3)
2
3
4

NAME

6       SNMP::Info::Layer2::HP - SNMP Interface to HP Procurve Switches
7

AUTHOR

9       Max Baker
10

SYNOPSIS

12        # Let SNMP::Info determine the correct subclass for you.
13        my $hp = new SNMP::Info(
14                                 AutoSpecify => 1,
15                                 Debug       => 1,
16                                 DestHost    => 'myswitch',
17                                 Community   => 'public',
18                                 Version     => 2
19                               )
20           or die "Can't connect to DestHost.\n";
21
22        my $class      = $hp->class();
23        print "SNMP::Info determined this device to fall under subclass : $class\n";
24

DESCRIPTION

26       Provides abstraction to the configuration information obtainable from a
27       HP ProCurve Switch via SNMP.
28
29       Note:  Some HP Switches will connect via SNMP version 1, but a lot of
30       config data will not be available.  Make sure you try and connect with
31       Version 2 first, and then fail back to version 1.
32
33       For speed or debugging purposes you can call the subclass directly, but
34       not after determining a more specific class using the method above.
35
36        my $hp = new SNMP::Info::Layer2::HP(...);
37
38   Inherited Classes
39       SNMP::Info::Layer2
40       SNMP::Info::MAU
41
42   Required MIBs
43       RFC1271-MIB
44           Included in V2 mibs from Cisco
45
46       HP-ICF-OID
47           (this MIB new with SNMP::Info 0.8)
48
49       STATISTICS-MIB
50       NETSWITCH-MIB
51       CONFIG-MIB
52       HP-ICF-BRIDGE
53       HP-ICF-POE-MIB
54       HP-ICF-CHASSIS
55       SEMI-MIB
56       HP-SWITCH-PL-MIB
57       BLADETYPE4-NETWORK-MIB
58
59       The last four MIBs listed are from HP and can be found at
60       <http://www.hp.com/rnd/software> or
61       <http://www.hp.com/rnd/software/MIBs.htm>
62

Change Log

64       Version 0.4 - Removed ENTITY-MIB e_*() methods to separate sub-class -
65       SNMP::Info::Entity
66

GLOBALS

68       These are methods that return scalar value from SNMP
69
70       $hp->cpu()
71           Returns CPU Utilization in percentage.
72
73       $hp->log()
74           Returns all the log entries from the switch's log that are not Link
75           up or down messages.
76
77       $hp->mem_free()
78           Returns bytes of free memory
79
80       $hp->mem_total()
81           Return bytes of total memory
82
83       $hp->mem_used()
84           Returns bytes of used memory
85
86       $hp->model()
87           Returns the model number of the HP Switch.  Will translate between
88           the HP Part number and the common model number with this map :
89
90            %MODEL_MAP = (
91               'J8131A' => 'WAP-420-WW',
92               'J8130A' => 'WAP-420-NA',
93               'J8133A' => 'AP520WL',
94               'J8680A' => '9408sl',
95               'J9091A' => '8212zl',
96               'J9475A' => '8206zl',
97               'J9265A' => '6600ml-24XG',
98               'J9264A' => '6600ml-24G-4XG',
99               'J9263A' => '6600ml-24G',
100               'J9452A' => '6600-48G-4XG',
101               'J9451A' => '6600-48G',
102               'J8474A' => '6410cl-6XG',
103               'J8433A' => '6400cl-6XG',
104               'J8992A' => '6200yl-24G',
105               'J4902A' => '6108',
106               'J8698A' => '5412zl',
107               'J8719A' => '5408yl',
108               'J8697A' => '5406zl',
109               'J8718A' => '5404yl',
110               'J4819A' => '5308XL',
111               'J4850A' => '5304XL',
112               'J8773A' => '4208vl',
113               'J8770A' => '4204vl',
114               'J8772A' => '4202vl-72',
115               'J9032A' => '4202vl-68G',
116               'J9031A' => '4202vl-68',
117               'J8771A' => '4202vl-48G',
118               'J4865A' => '4108GL',
119               'J4887A' => '4104GL',
120               'J9588A' => '3800-48G-PoE+-4XG',
121               'J9574A' => '3800-48G-PoE+-4SFP+',
122               'J9586A' => '3800-48G-4XG',
123               'J9576A' => '3800-48G-4SFP+',
124               'J9584A' => '3800-24SFP-2SFP+',
125               'J9587A' => '3800-24G-PoE+-2XG',
126               'J9573A' => '3800-24G-PoE+-2SFP+',
127               'J9585A' => '3800-24G-2XG',
128               'J9575A' => '3800-24G-2SFP+',
129               'J8693A' => '3500yl-48G-PWR',
130               'J8692A' => '3500yl-24G-PWR',
131               'J9473A' => '3500-48-PoE',
132               'J9472A' => '3500-48',
133               'J9471A' => '3500-24-PoE',
134               'J9470A' => '3500-24',
135               'J4906A' => '3400cl-48G',
136               'J4905A' => '3400cl-24G',
137               'J4815A' => '3324XL',
138               'J4851A' => '3124',
139               'J9562A' => '2915-8G-PoE',
140               'J9148A' => '2910al-48G-PoE+',
141               'J9147A' => '2910al-48G',
142               'J9146A' => '2910al-24G-PoE+',
143               'J9145A' => '2910al-24G',
144               'J9050A' => '2900-48G',
145               'J9049A' => '2900-24G',
146               'J4904A' => '2848',
147               'J4903A' => '2824',
148               'J9022A' => '2810-48G',
149               'J9021A' => '2810-24G',
150               'J8165A' => '2650-PWR',
151               'J4899B' => '2650-CR',
152               'J4899C' => '2650C',
153               'J4899A' => '2650',
154               'J8164A' => '2626-PWR',
155               'J4900B' => '2626-CR',
156               'J4900C' => '2626C',
157               'J4900A' => '2626',
158               'J9627A' => '2620-48-PoE+',
159               'J9626A' => '2620-48',
160               'J9624A' => '2620-24-PPoE+',
161               'J9625A' => '2620-24-PoE+',
162               'J9623A' => '2620-24',
163               'J9565A' => '2615-8-PoE',
164               'J9089A' => '2610-48-PWR',
165               'J9088A' => '2610-48',
166               'J9087A' => '2610-24-PWR',
167               'J9086A' => '2610-24/12PWR',
168               'J9085A' => '2610-24',
169               'J8762A' => '2600-8-PWR',
170               'J4813A' => '2524',
171               'J9298A' => '2520G-8-PoE',
172               'J9299A' => '2520G-24-PoE',
173               'J9137A' => '2520-8-PoE',
174               'J9138A' => '2520-24-PoE',
175               'J4812A' => '2512',
176               'J9280A' => '2510G-48',
177               'J9279A' => '2510G-24',
178               'J9020A' => '2510-48A',
179               'J9019B' => '2510-24B',
180               'J9019A' => '2510-24A',
181               'J4818A' => '2324',
182               'J4817A' => '2312',
183               'J9449A' => '1810G-8',
184               'J9450A' => '1810G-24',
185               'J9029A' => '1800-8G',
186               'J9028A' => '1800-24G',
187            );
188
189       $hp->os()
190           Returns hp
191
192       $hp->os_bin()
193           "hpSwitchRomVersion.0"
194
195       $hp->os_ver()
196           Tries to use os_version() and if that fails will try and cull the
197           version from the description field.
198
199       $hp->os_version()
200           "hpSwitchOsVersion.0"
201
202       $hp->serial()
203           Returns serial number if available through SNMP
204
205       $hp->slots()
206           Returns number of entries in $hp->e_name that have 'slot' in them.
207
208       $hp->vendor()
209           hp
210
211       $hp->fan()
212           Returns fan status
213
214       $hp->ps1_status()
215           Power supply 1 status
216
217       $hp->ps2_status()
218           Power supply 2 status
219
220       $hp->peth_port_power()
221           Power supplied by PoE ports, in milliwatts
222           ("hpicfPoePethPsePortPower")
223
224       $hp->stp_ver()
225           Returns what version of STP the device is running.
226           ("hpicfBridgeRstpForceVersion" with fallback to inherited
227           stp_ver())
228
229   Globals imported from SNMP::Info::Layer2
230       See documentation in "GLOBALS" in SNMP::Info::Layer2 for details.
231
232   Globals imported from SNMP::Info::MAU
233       See documentation in "GLOBALS" in SNMP::Info::MAU for details.
234

TABLE METHODS

236       These are methods that return tables of information in the form of a
237       reference to a hash.
238
239   Overrides
240       $hp->interfaces()
241           Uses $hp->i_description()
242
243       $hp->i_duplex()
244           Returns reference to map of IIDs to current link duplex.
245
246       $hp->i_duplex_admin()
247           Returns reference to hash of IIDs to admin duplex setting.
248
249       $hp->vendor_i_type()
250           Returns reference to hash of IIDs to HP specific port type
251           ("hpSwitchPortType").
252
253       $hp->i_name()
254           Crosses i_name() with $hp->e_name() using $hp->e_port() and
255           i_alias()
256
257       $hp->peth_port_ifindex()
258           Returns reference to hash of power Ethernet port table entries map
259           back to interface index (c<ifIndex>)
260
261       "agg_ports"
262           Returns a HASH reference mapping from slave to master port for each
263           member of a port bundle on the device. Keys are ifIndex of the
264           slave ports, Values are ifIndex of the corresponding master ports.
265
266   Table Methods imported from SNMP::Info::Layer2
267       See documentation in "TABLE METHODS" in SNMP::Info::Layer2 for details.
268
269   Table Methods imported from SNMP::Info::MAU
270       See documentation in "TABLE METHODS" in SNMP::Info::MAU for details.
271

MUNGES

273       munge_hp_c_id()
274           Munge for c_id which handles CDP and LLDP.
275

SET METHODS

277       These are methods that provide SNMP set functionality for overridden
278       methods or provide a simpler interface to complex set operations.  See
279       "SETTING DATA VIA SNMP" in SNMP::Info for general information on set
280       operations.
281
282       set_i_vlan()
283       set_i_vlan_tagged()
284
285
286
287perl v5.28.1                      2019-04-04         SNMP::Info::Layer2::HP(3)
Impressum