1srec_tektronix(5)             File Formats Manual            srec_tektronix(5)
2
3
4

NAME

6       srec_tektronix - Tektronix hexadecimal file format
7

DESCRIPTION

9       The  Tektronix  hexadecimal  file  format is no longer very common.  It
10       serves a similar purpose to the Motorola  and  Intel  formats,  usually
11       used to transfer data into EPROM programmers.
12
13   The Lines
14       Most Tektronix hex files contain only Tektronix hex lines (see the next
15       section), which always start with a slash  (“/[rq])  character.   There
16       are only two types of lines - data lines and a termination line.
17
18   Data Lines
19       Data  lines  have  five  fields:  address, length, checksum 1, data and
20       checksum 2.  The lines always start with a slash (“/[rq]) character.
21
22                ┌──┬─────────┬────────┬───────────┬──────┬───────────┐
23                │/ │ Address │ Length │ Checksum1 │ Data │ Checksum2 │
24                └──┴─────────┴────────┴───────────┴──────┴───────────┘
25       Address This is a 4 character (2 byte) address that specifies where the
26               data in the record is to be loaded into memory.
27
28       Data Length
29               The  data  length  field  is  a 2 character (1 byte) field that
30               specifies the number of character pairs  (bytes)  in  the  data
31               field.  This field never has a value of zero.
32
33       Checksum 1
34               The  checksum  1  field  is  a 2 character (1 byte) field.  Its
35               value is the 8‐bit sum of the six 4‐bit values  which  make  up
36               the address and length fields.
37
38       Data    The  data field contains character pairs (bytes); the number of
39               character pairs (bytes) is indicated by the length field.
40
41       Checksum 2
42               The checksum 2 field is a 2  character  (1  byte)  field.   Its
43               value  is  the least significant byte of the sum of the all the
44               4‐bit values of the data field.
45
46   Termination Line
47       Termination lines have three fields: address, zero and  checksum.   The
48       lines always start with a slash (“/[rq]) character.
49
50                           ┌──┬─────────┬──────┬──────────┐
51                           │/ │ Address │ Zero │ Checksum │
52                           └──┴─────────┴──────┴──────────┘
53       Address This  is a 4 character (2 byte) address that specifies where to
54               begin execution.
55
56       Zero    The data length field is a 2 character (1 byte) field of  value
57               zero.
58
59       Checksum
60               The  checksum  1  field  is  a 2 character (1 byte) field.  Its
61               value is the 8‐bit sum of the six 4‐bit values  which  make  up
62               the address and zero fields.
63
64   Size Multiplier
65       In general, binary data will expand in sized by approximately 2.4 times
66       when represented with this format.
67

EXAMPLE

69       Here is an example Tektronix hex file.  It contains  the  data  “Hello,
70       World[rq] to be loaded at address 0.
71              /00000D0D48656C6C6F2C20576F726C640A52
72              /00000000
73
75       srec_cat version 1.64
76       Copyright  (C)  1998,  1999,  2000, 2001, 2002, 2003, 2004, 2005, 2006,
77       2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Peter Miller
78
79       The srec_cat program comes with ABSOLUTELY NO WARRANTY; for details use
80       the 'srec_cat -VERSion License' command.  This is free software and you
81       are welcome to redistribute it under certain  conditions;  for  details
82       use the 'srec_cat -VERSion License' command.
83

MAINTAINER

85       Scott Finneran   E‐Mail:   scottfinneran@yahoo.com.au
86       Peter Miller     E‐Mail:   pmiller@opensource.org.au
87
88
89
90Reference Manual                    SRecord                  srec_tektronix(5)
Impressum