1numad_selinux(8)             SELinux Policy numad             numad_selinux(8)
2
3
4

NAME

6       numad_selinux - Security Enhanced Linux Policy for the numad processes
7

DESCRIPTION

9       Security-Enhanced Linux secures the numad processes via flexible manda‐
10       tory access control.
11
12       The numad processes execute with the  numad_t  SELinux  type.  You  can
13       check  if  you have these processes running by executing the ps command
14       with the -Z qualifier.
15
16       For example:
17
18       ps -eZ | grep numad_t
19
20
21

ENTRYPOINTS

23       The numad_t SELinux type can be entered via the numad_exec_t file type.
24
25       The default entrypoint paths for the numad_t domain are the following:
26
27       /usr/bin/numad
28

PROCESS TYPES

30       SELinux defines process types (domains) for each process running on the
31       system
32
33       You can see the context of a process using the -Z option to ps
34
35       Policy  governs  the  access confined processes have to files.  SELinux
36       numad policy is very flexible allowing users to setup their numad  pro‐
37       cesses in as secure a method as possible.
38
39       The following process types are defined for numad:
40
41       numad_t
42
43       Note:  semanage  permissive  -a numad_t can be used to make the process
44       type numad_t permissive. SELinux does not  deny  access  to  permissive
45       process  types, but the AVC (SELinux denials) messages are still gener‐
46       ated.
47
48

BOOLEANS

50       SELinux policy is customizable based on least access  required.   numad
51       policy is extremely flexible and has several booleans that allow you to
52       manipulate the policy and run numad with the tightest access possible.
53
54
55
56       If you want to deny any process from ptracing or  debugging  any  other
57       processes,  you  must  turn  on  the  deny_ptrace  boolean.  Enabled by
58       default.
59
60       setsebool -P deny_ptrace 1
61
62
63
64       If you want to allow all domains to execute in fips_mode, you must turn
65       on the fips_mode boolean. Enabled by default.
66
67       setsebool -P fips_mode 1
68
69
70

MANAGED FILES

72       The SELinux process type numad_t can manage files labeled with the fol‐
73       lowing file types.  The paths listed are the default  paths  for  these
74       file types.  Note the processes UID still need to have DAC permissions.
75
76       cgroup_t
77
78            /sys/fs/cgroup
79
80       cluster_conf_t
81
82            /etc/cluster(/.*)?
83
84       cluster_var_lib_t
85
86            /var/lib/pcsd(/.*)?
87            /var/lib/cluster(/.*)?
88            /var/lib/openais(/.*)?
89            /var/lib/pengine(/.*)?
90            /var/lib/corosync(/.*)?
91            /usr/lib/heartbeat(/.*)?
92            /var/lib/heartbeat(/.*)?
93            /var/lib/pacemaker(/.*)?
94
95       cluster_var_run_t
96
97            /var/run/crm(/.*)?
98            /var/run/cman_.*
99            /var/run/rsctmp(/.*)?
100            /var/run/aisexec.*
101            /var/run/heartbeat(/.*)?
102            /var/run/corosync-qnetd(/.*)?
103            /var/run/corosync-qdevice(/.*)?
104            /var/run/corosync.pid
105            /var/run/cpglockd.pid
106            /var/run/rgmanager.pid
107            /var/run/cluster/rgmanager.sk
108
109       numad_var_log_t
110
111            /var/log/numad.log.*
112
113       numad_var_run_t
114
115            /var/run/numad.pid
116
117       root_t
118
119            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
120            /
121            /initrd
122
123       sysfs_t
124
125            /sys(/.*)?
126
127

FILE CONTEXTS

129       SELinux requires files to have an extended attribute to define the file
130       type.
131
132       You can see the context of a file using the -Z option to ls
133
134       Policy governs the access  confined  processes  have  to  these  files.
135       SELinux  numad  policy  is  very flexible allowing users to setup their
136       numad processes in as secure a method as possible.
137
138       STANDARD FILE CONTEXT
139
140       SELinux defines the file context types for the numad, if you wanted  to
141       store  files  with  these types in a diffent paths, you need to execute
142       the semanage command  to  sepecify  alternate  labeling  and  then  use
143       restorecon to put the labels on disk.
144
145       semanage fcontext -a -t numad_var_run_t '/srv/mynumad_content(/.*)?'
146       restorecon -R -v /srv/mynumad_content
147
148       Note:  SELinux  often  uses  regular expressions to specify labels that
149       match multiple files.
150
151       The following file types are defined for numad:
152
153
154
155       numad_exec_t
156
157       - Set files with the numad_exec_t type, if you want  to  transition  an
158       executable to the numad_t domain.
159
160
161
162       numad_unit_file_t
163
164       -  Set  files with the numad_unit_file_t type, if you want to treat the
165       files as numad unit content.
166
167
168
169       numad_var_log_t
170
171       - Set files with the numad_var_log_t type, if you  want  to  treat  the
172       data  as  numad  var log data, usually stored under the /var/log direc‐
173       tory.
174
175
176
177       numad_var_run_t
178
179       - Set files with the numad_var_run_t type, if you  want  to  store  the
180       numad files under the /run or /var/run directory.
181
182
183
184       Note:  File context can be temporarily modified with the chcon command.
185       If you want to permanently change the file context you need to use  the
186       semanage fcontext command.  This will modify the SELinux labeling data‐
187       base.  You will need to use restorecon to apply the labels.
188
189

COMMANDS

191       semanage fcontext can also be used to manipulate default  file  context
192       mappings.
193
194       semanage  permissive  can  also  be used to manipulate whether or not a
195       process type is permissive.
196
197       semanage module can also be used to enable/disable/install/remove  pol‐
198       icy modules.
199
200       semanage boolean can also be used to manipulate the booleans
201
202
203       system-config-selinux is a GUI tool available to customize SELinux pol‐
204       icy settings.
205
206

AUTHOR

208       This manual page was auto-generated using sepolicy manpage .
209
210

SEE ALSO

212       selinux(8),  numad(8),  semanage(8),  restorecon(8),  chcon(1),  sepol‐
213       icy(8), setsebool(8)
214
215
216
217numad                              19-06-18                   numad_selinux(8)
Impressum