1NVME-FW-COMMIT(1)                 NVMe Manual                NVME-FW-COMMIT(1)
2
3
4

NAME

6       nvme-fw-commit - Used to verify and commit a firmware image.
7

SYNOPSIS

9       nvme fw-commit <device> [--slot=<slot> | -s <slot>]
10                           [--action=<action> | -a <action>]
11                           [--bpid=<boot-partid> | -b <boot-partid> ]
12

DESCRIPTION

14       For the NVMe device given, send an nvme Firmware Commit admin command
15       and provides the results.
16
17       The Firmware Commit command is used to verify that a valid firmware
18       image has been downloaded and to commit that revision to a specific
19       firmware slot. The host may select the firmware image to commit on the
20       next controller reset (CC.EN transitions from ‘1’ to ‘0’, a PCI
21       function level reset, and/or other Controller or NVM Subsystem Reset)
22       as part of this command. The currently executing firmware revision may
23       be determined from the Firmware Revision field of the Identify
24       Controller data structure as indicated in the Firmware Slot Information
25       log page.
26
27       No further action is automatically taken to reset the device, which is
28       usually required to complete the activation process. If your kernel and
29       driver are recent enough, you can commit the firmware by issuing a
30       reset through Linux sysfs, for example:
31
32            # echo 1 > /sys/class/nvme/nvme0/device/reset
33
34       If your kernel is not recent enough, you will need to remove and add
35       the device some other way.
36

OPTIONS

38       -a <action>, --action=<action>
39           Commit Action: This field specifies the action that is taken on the
40           image downloaded with the Firmware Image Download command or on a
41           previously downloaded and placed image.
42
43           ┌──────┬────────────────────────────┐
44           │Value │ Definition                 │
45           ├──────┼────────────────────────────┤
46           │0     │ Downloaded image replaces  │
47           │      │ the image indicated by the │
48           │      │ Firmware Slot field. This  │
49           │      │ image is not activated.    │
50           ├──────┼────────────────────────────┤
51           │1     │ Downloaded image replaces  │
52           │      │ the image indicated by the │
53           │      │ Firmware Slot field. This  │
54           │      │ image is activated at the  │
55           │      │ next reset.                │
56           ├──────┼────────────────────────────┤
57           │2     │ The image indicated by the │
58           │      │ Firmware Slot field is     │
59           │      │ activated at the next      │
60           │      │ reset.                     │
61           ├──────┼────────────────────────────┤
62           │3     │ The image specified by the │
63           │      │ Firmware Slot field is     │
64           │      │ requested to be activated  │
65           │      │ immediately without reset. │
66           ├──────┼────────────────────────────┤
67           │6     │ Downloaded image replaces  │
68           │      │ the Boot Partition         │
69           │      │ specified by the Boot      │
70           │      │ Partition ID field.        │
71           ├──────┼────────────────────────────┤
72           │7     │ Mark the Boot Partition    │
73           │      │ specified in the BPID      │
74           │      │ field as active and update │
75           │      │ BPINFO.ABPID.              │
76           └──────┴────────────────────────────┘
77
78       -s <slot>, --slot=<slot>
79           Firmware Slot: Specifies the firmware slot that shall be used for
80           the Commit Action, if applicable. If the value specified is 0h,
81           then the controller shall choose the firmware slot (slot 1 – 7) to
82           use for the operation.
83
84       --bpid=<boot-partid>, -b <boot-partid>
85           Specifiies the Boot partition that shall be used for the Commit
86           Action, if applicable (default: 0)
87

EXAMPLES

89       ·   commit the last downloaded fw to slot 1.
90
91               # nvme fw-commit /dev/nvme0 --slot=1 --action=2
92

ALIAS

94       fw-activate
95

NVME

97       Part of the nvme-user suite
98
99
100
101NVMe                              01/08/2019                 NVME-FW-COMMIT(1)
Impressum