1Pbmtextps User Manual(0)                              Pbmtextps User Manual(0)
2
3
4

NAME

6       pbmtextps - render text into a PBM image using a postscript interpreter
7
8

SYNOPSIS

10       pbmtextps [-font fontname] [-fontsize float] [-resolution n] [-leftmar‐
11       gin=n] [-rightmargin=n]  [-topmargin=n]  [-bottommargin=n]  [-ascent=n]
12       [-descent=n] [-pad] [-crop] [-stroke n] [-verbose] [-dump-ps] text
13
14

DESCRIPTION

16       This program is part of Netpbm(1).
17
18       pbmtextps takes a single line of text from the command line and renders
19       it into a PBM image.  The image is of a single line  of  text;  newline
20       characters in the input have no effect.
21
22       See  pbmtext for a more sophisticated generator of text, but using less
23       common font formats.  pbmtext can generate multiple lines of text.
24
25       The -plain common option  ⟨index.html#commonoptions⟩    has  no  effect
26       before Netpbm 10.42 (March 2008).  The output is always raw PBM.
27
28
29   Margins
30       By  default,  the image is cropped at the top and the right.  It is not
31       cropped at the left or bottom so that the text begins at the same posi‐
32       tion  relative  to the origin.  The size of the default left and bottom
33       margins is explained below.
34
35       You can set whatever margin you want with options -leftmargin,  -right‐
36       margin,  -topmargin  and  -bottommargin.  The specified amount of white
37       space gets added to the far edge of type, e.g. if you specify 10 points
38       for -topmargin, you will get 10 points of white space above the highest
39       character on the line.  Specify 0 to crop a side.
40
41       -ascent adds white space to the top to reach a specified distance above
42       the  text  baseline,  and -descent adds white space to to the bottom to
43       reach a specified distance below the text baseline.
44
45       -ascent and -descent are more useful than -topmargin  and  -bottomargin
46       when  you  render  two  pieces of text (in separate invocations of pbm‐
47       textps) that you  will  concatenate  horizontally.   With  -ascent  and
48       -descent, the two images will be the same height with the text baseline
49       in the same place.  With -topmargin and -bottommargin, that may not  be
50       the case.
51
52       Example:
53
54            $ pbmtextps -font=Times-Roman -descent=20 \
55                 'The soup is called' > a1.pbm
56            $ pbmtextps -font=Itallic -descent=20 'Goulash.' > a2.pbm
57            $ pnmcat -lr -jb a1.pbm a2.pbm > out.pbm
58
59       If  you have -ascent, there is probably no point in specifying -topmar‐
60       gin too, but if you do, the effect is cumulative.  The same is true  of
61       -descent and -bottommargin.
62
63       -pad  pads the image on the top and bottom to the where the highest and
64       lowest characters in the font would reach, even if you don't have those
65       characters  in your text.  This is useful if you will generate multiple
66       images of text (with multiple invocations of pbmtextps) and concatenate
67       them  vertically to create a multiline text image.  -pad makes sure the
68       lines in this image are equally spaced.
69
70       Example:
71
72           $ pbmtextps 'cat'   | pamfile
73           $ pbmtextps 'Catty' | pamfile
74
75       The commands above, with no -pad, show that the 'Catty' image is higher
76       because capital C reaches high and 'y' reaches low.
77
78           $ pbmtextps -pad 'cat'   | pamfile
79           $ pbmtextps -pad 'Catty' | pamfile
80
81       The  commands  above,  with  -pad,  show  that both images are the same
82       height.
83
84       If you specify -pad with -ascent  or  -descent,  the  larger  value  is
85       effective.
86
87       -crop makes the program crop all sides to the far edge of the type.  It
88       is the same as -leftmargin=0  -rightmargin=0  -topmargin=0  -bottommar‐
89       gin=0.
90
91       You cannot specify any other margin-affecting options with -crop.
92
93       The  default  top margin, when you specify neither -ascent, -topmargin,
94       nor -pad, is as if you specified topmargin=0.
95
96       The default bottom margin, when you specify neither -descent,  -bottom‐
97       margin, nor -pad, is as if you specified -descent=1.5*fontsize.
98
99       The  default left margin, when you do not specify -leftmargin, is as if
100       you specified -leftmargin=0.5*fontsize.
101
102       The default right margin, when you do not specify -rightmargin,  is  as
103       if you specified -rightmargin=0.
104
105
106

OPTIONS

108       -font=fontname
109
110              This  specifies  the  font  to use.  fontname is the name of any
111              valid postscript font which is installed on the system.
112
113              The default is TimesRoman.
114
115              Warning: if fontname does not name a valid font, pbmtextps  just
116              uses the default font.  It does not tell you it is doing this.
117
118
119       -fontsize=float
120              This  is  the  size  of the font in points.  See the -resolution
121              option for information on how to interpret this size.
122
123              The default is 24 points.
124
125              Before Netpbm 10.75 (June 2016), this has to be a whole number.
126
127
128       -resolution=n
129              This is the resolution in dots per inch of distance measurements
130              pertaining  to  generation  of the image.  PBM images don't have
131              any inherent resolution, so a distance such as "1 inch"  doesn't
132              mean  anything  unless  you  separately  specify what resolution
133              you're talking about.  That's what this option does.
134
135              In particular, the meaning of the font  size  is  determined  by
136              this  resolution.  If the font size is 24 points and the resolu‐
137              tion is 150 dpi, then the font size is 50 pixels.
138
139              The default is 150 dpi.
140
141
142       -leftmargin=n
143
144       -rightmargin=n
145
146       -topmargin=n
147
148       -bottommargin=n
149              These options control the margins added to the  image,  measured
150              from  the  far  edge  of  the type.  See Margins ⟨#margins⟩  for
151              details.
152
153              All sizes are in points, as a floating point number.
154
155              These options were new in Netpbm 10.75 (June 2016).
156
157
158       -ascent=n
159
160       -descent=n
161              These options control the margins added to the  image,  measured
162              from the text baseline.  See Margins ⟨#margins⟩  for details.
163
164              Sizes are in points, as a floating point number.
165
166              These options were new in Netpbm 10.75 (June 2016).
167
168
169       -pad   This pads the image on the top and bottom to the where the high‐
170              est and lowest characters in the font would reach, even  if  you
171              don't   have   those  characters  in  your  text.   See  Margins
172              ⟨#margins⟩  for details.
173
174              This option was new in Netpbm 10.75 (June 2016).
175
176
177       -crop  This makes the program crop all sides to the  far  edge  of  the
178              type.   It  is the same as -leftmargin=0 -rightmargin=0 -topmar‐
179              gin=0 -bottommargin=0.  See Margins ⟨#margins⟩  for details.
180
181              This option was new in Netpbm 10.75 (June 2016).
182
183
184       -stroke=n
185              This is the width of line, in points, to use  for  stroke  font.
186              There  is  no  default  stroke  width because the characters are
187              solid by default.
188
189
190       -verbose
191              This option makes pbmtextps display extra information  on  Stan‐
192              dard Error about its processing.
193
194
195       -dump-ps
196              This  option  makes pbmtextps write to Standard Output the Post‐
197              script program it would use to create the image, rather than the
198              image  itself.  You can use this as input to a Postscript inter‐
199              preter (such as Ghostscript or a a printer) or to understand the
200              program better.
201
202              This option was new in Netpbm 10.75 (June 2016).
203
204
205
206

USAGE

208       You can generate antialiased text by using a larger resolution than the
209       default and scaling the image down using pamscale.
210
211       See the manual for the similar pbmtext for more advice on usage.
212
213

HISTORY

215       pbmtextps was added to Netpbm in Release 10.0 (June 2002).
216
217
218

SEE ALSO

220       pbmtext(1), pamcut(1),  pnmcrop(1),  pamcomp(1),  ppmchange(1),  pnmro‐
221       tate(1), pamscale(1), ppmlabel(1), pbm(1)
222
223

AUTHOR

225       Copyright (C) 2002 by James McCann
226

DOCUMENT SOURCE

228       This  manual  page was generated by the Netpbm tool 'makeman' from HTML
229       source.  The master documentation is at
230
231              http://netpbm.sourceforge.net/doc/pbmtextps.html
232
233netpbm documentation             15 June 2016         Pbmtextps User Manual(0)
Impressum