1Moose::Manual::Roles(3)User Contributed Perl DocumentatioMnoose::Manual::Roles(3)
2
3
4

NAME

6       Moose::Manual::Roles - Roles, an alternative to deep hierarchies and
7       base classes
8

VERSION

10       version 2.2011
11

WHAT IS A ROLE?

13       A role encapsulates some piece of behavior or state that can be shared
14       between classes. It is something that classes do. It is important to
15       understand that roles are not classes. You cannot inherit from a role,
16       and a role cannot be instantiated. We sometimes say that roles are
17       consumed, either by classes or other roles.
18
19       Instead, a role is composed into a class. In practical terms, this
20       means that all of the methods, method modifiers, and attributes defined
21       in a role are added directly to (we sometimes say "flattened into") the
22       class that consumes the role. These attributes and methods then appear
23       as if they were defined in the class itself. A subclass of the
24       consuming class will inherit all of these methods and attributes.
25
26       Moose roles are similar to mixins or interfaces in other languages and
27       are based on the original concept of Traits
28       <http://scg.unibe.ch/research/traits/> for the Smalltalk-80 dialect
29       Squeak.
30
31       Besides defining their own methods and attributes, roles can also
32       require that the consuming class define certain methods of its own. You
33       could have a role that consisted only of a list of required methods, in
34       which case the role would be very much like a Java interface.
35
36       Note that attribute accessors also count as methods for the purposes of
37       satisfying the requirements of a role.
38

A SIMPLE ROLE

40       Creating a role looks a lot like creating a Moose class:
41
42         package Breakable;
43
44         use Moose::Role;
45
46         has 'is_broken' => (
47             is  => 'rw',
48             isa => 'Bool',
49         );
50
51         sub break {
52             my $self = shift;
53
54             print "I broke\n";
55
56             $self->is_broken(1);
57         }
58
59       Except for our use of Moose::Role, this looks just like a class
60       definition with Moose. However, this is not a class, and it cannot be
61       instantiated.
62
63       Instead, its attributes and methods will be composed into classes which
64       use the role:
65
66         package Car;
67
68         use Moose;
69
70         with 'Breakable';
71
72         has 'engine' => (
73             is  => 'ro',
74             isa => 'Engine',
75         );
76
77       The "with" function composes roles into a class. Once that is done, the
78       "Car" class has an "is_broken" attribute and a "break" method. The
79       "Car" class also "does('Breakable')":
80
81         my $car = Car->new( engine => Engine->new );
82
83         print $car->is_broken ? 'Busted' : 'Still working';
84         $car->break;
85         print $car->is_broken ? 'Busted' : 'Still working';
86
87         $car->does('Breakable'); # true
88
89       This prints:
90
91         Still working
92         I broke
93         Busted
94
95       We could use this same role in a "Bone" class:
96
97         package Bone;
98
99         use Moose;
100
101         with 'Breakable';
102
103         has 'marrow' => (
104             is  => 'ro',
105             isa => 'Marrow',
106         );
107
108       See also Moose::Cookbook::Roles::Comparable_CodeReuse for an example.
109
110       It's possible to compose existing roles into new roles. For example, we
111       can have a "HandleWithCare" class which applies both the "Breakable"
112       and "Package" roles to any class which consumes it:
113
114         package HandleWithCare;
115
116         use Moose::Role;
117
118         with 'Breakable', 'Package';
119

REQUIRED METHODS

121       As mentioned previously, a role can require that consuming classes
122       provide one or more methods. Using our "Breakable" example, let's make
123       it require that consuming classes implement their own "break" methods:
124
125         package Breakable;
126
127         use Moose::Role;
128
129         requires 'break';
130
131         has 'is_broken' => (
132             is  => 'rw',
133             isa => 'Bool',
134         );
135
136         after 'break' => sub {
137             my $self = shift;
138
139             $self->is_broken(1);
140         };
141
142       If we try to consume this role in a class that does not have a "break"
143       method, we will get an exception.
144
145       You can see that we added a method modifier on "break". We want classes
146       that consume this role to implement their own logic for breaking, but
147       we make sure that the "is_broken" attribute is always set to true when
148       "break" is called.
149
150         package Car
151
152         use Moose;
153
154         with 'Breakable';
155
156         has 'engine' => (
157             is  => 'ro',
158             isa => 'Engine',
159         );
160
161         sub break {
162             my $self = shift;
163
164             if ( $self->is_moving ) {
165                 $self->stop;
166             }
167         }
168
169   Roles Versus Abstract Base Classes
170       If you are familiar with the concept of abstract base classes in other
171       languages, you may be tempted to use roles in the same way.
172
173       You can define an "interface-only" role, one that contains just a list
174       of required methods.
175
176       However, any class which consumes this role must implement all of the
177       required methods, either directly or through inheritance from a parent.
178       You cannot delay the method requirement check so that they can be
179       implemented by future subclasses.
180
181       Because the role defines the required methods directly, adding a base
182       class to the mix would not achieve anything. We recommend that you
183       simply consume the interface role in each class which implements that
184       interface.
185

CONSUMING ROLES

187       Roles are consumed using the "with" function.
188
189       Most of the time, you should only use one "with", even if you are
190       consuming multiple roles. If you consume roles using multiple "with"
191       statements Moose cannot detect method conflicts between those roles.
192
193       Roles can be consumed by classes or by other roles. When a class
194       consumes a role which in turn consumes other roles, the class gets all
195       of the roles applied at once.
196
197   Required Methods Provided by Attributes
198       As mentioned before, a role's required method may also be satisfied by
199       an attribute accessor. However, the call to "has" which defines an
200       attribute happens at runtime. This means that you must define the
201       attribute before consuming the role, or else the role will not see the
202       generated accessor.  These attributes are Moose Attributes.
203
204         package Breakable;
205
206         use Moose::Role;
207
208         requires 'stress';
209
210         ########
211
212         package Car;
213
214         use Moose;
215
216         has 'stress' => (
217             is  => 'ro',
218             isa => 'Int',
219         );
220
221         with 'Breakable';
222
223       In general, we recommend that you always consume roles after declaring
224       all your attributes.
225
226       It may also be the case that a class wants to consume two roles where
227       one role has an attribute providing a required method for another. For
228       example:
229
230         package Breakable;
231
232         use Moose::Role;
233
234         requires 'stress';
235
236         ########
237
238         package Stressable;
239
240         use Moose::Role;
241
242         has 'stress' => (
243             is  => 'ro',
244             isa => 'Int',
245         );
246
247         ########
248
249         package Car;
250
251         use Moose;
252
253         # XXX - this will not work
254         with 'Breakable', 'Stressable';
255
256       However, this won't work. The problem is that the accessor methods
257       created for the "stress" attribute won't be present in the class when
258       the required method checks are done.
259
260       There are two possible workarounds. The recommended one is to use
261       "stub" subroutine(s) in the role providing the accessor(s):
262
263         package Stressable;
264
265         use Moose::Role;
266
267         sub stress;
268         has 'stress' => (
269             is  => 'ro',
270             isa => 'Int',
271         );
272
273       The "sub stress;" line is called a "forward" declaration in the Perl
274       documentation. It creates what is called a "stub" subroutine, a
275       declaration without a body. This is good enough to satisfy the required
276       method checks done by Moose. The stub will not interfere with the
277       creation of a real subroutine later.
278
279       The other alternative is to use two separate calls to "with" in the
280       consuming class:
281
282         package Car;
283
284         use Moose;
285
286         # Not recommended
287         with 'Stressable';
288         with 'Breakable';
289
290       Each "with" is run as it is seen. The first call will consume just the
291       "Stressable" role, which will add the "stress" attribute to the "Car"
292       package, which in turn will create an accessor method named "stress".
293       Then when the "Breakable" role is consumed, the method it requires
294       already exists.
295
296       However, as mentioned earlier, multiple "with" declarations are not
297       recommended, because method conflicts between the roles cannot be seen.
298       In the example above, if both "Stressable" and "Breakable" contained
299       methods of the same name, what would happen is that the version in
300       "Stressable" would silently override the one in "Breakable".
301

USING METHOD MODIFIERS

303       Method modifiers and roles are a very powerful combination.  Often, a
304       role will combine method modifiers and required methods. We already saw
305       one example with our "Breakable" example.
306
307       Method modifiers increase the complexity of roles, because they make
308       the role application order relevant. If a class uses multiple roles,
309       each of which modify the same method, those modifiers will be applied
310       in the same order as the roles are used:
311
312         package MovieCar;
313
314         use Moose;
315
316         extends 'Car';
317
318         with 'Breakable', 'ExplodesOnBreakage';
319
320       Assuming that the new "ExplodesOnBreakage" role also has an "after"
321       modifier on "break", the "after" modifiers will run one after the
322       other. The modifier from "Breakable" will run first, then the one from
323       "ExplodesOnBreakage".
324

METHOD CONFLICTS

326       If a class composes multiple roles, and those roles have methods of the
327       same name, we will have a conflict. In that case, the composing class
328       is required to provide its own method of the same name.
329
330         package Breakdancer;
331
332         use Moose::Role;
333
334         sub break {
335
336         }
337
338       If we compose both "Breakable" and "Breakdancer" in a class, we must
339       provide our own "break" method:
340
341         package FragileDancer;
342
343         use Moose;
344
345         with 'Breakable', 'Breakdancer';
346
347         sub break { ... }
348
349       A role can be a collection of other roles:
350
351         package Break::Bundle;
352
353         use Moose::Role;
354
355         with ('Breakable', 'Breakdancer');
356
357       When a role consumes another a role, the consuming role's methods
358       silently win in any conflict, and the consumed role's methods are
359       simply ignored.
360

METHOD EXCLUSION AND ALIASING

362       If we want our "FragileDancer" class to be able to call the methods
363       from both its roles, we can alias the methods:
364
365         package FragileDancer;
366
367         use Moose;
368
369         with 'Breakable'   => { -alias => { break => 'break_bone' } },
370              'Breakdancer' => { -alias => { break => 'break_dance' } };
371
372       However, aliasing a method simply makes a copy of the method with the
373       new name. We also need to exclude the original name:
374
375         with 'Breakable' => {
376             -alias    => { break => 'break_bone' },
377             -excludes => 'break',
378             },
379             'Breakdancer' => {
380             -alias    => { break => 'break_dance' },
381             -excludes => 'break',
382             };
383
384       The excludes parameter prevents the "break" method from being composed
385       into the "FragileDancer" class, so we don't have a conflict. This means
386       that "FragileDancer" does not need to implement its own "break" method.
387
388       This is useful, but it's worth noting that this breaks the contract
389       implicit in consuming a role. Our "FragileDancer" class does both the
390       "Breakable" and "BreakDancer", but does not provide a "break" method.
391       If some API expects an object that does one of those roles, it probably
392       expects it to implement that method.
393
394       In some use cases we might alias and exclude methods from roles, but
395       then provide a method of the same name in the class itself.
396
397       Also see Moose::Cookbook::Roles::Restartable_AdvancedComposition for an
398       example.
399

OVERLOADING

401       When a Moose role uses overloading, that overloading is composed into
402       any classes that consume the role. This includes the setting of the
403       "fallback" value for that role's overloading. Just as with methods and
404       attributes, when a role consumes another role, that other role's
405       overloading settings are applied to the role.
406
407       Just as with methods, there can be conflicts with overloading
408       implementations between multiple roles when they are all consumed by a
409       class. If two roles both provide different overloading implementations
410       for a given operator, that is a conflict. If two roles both implement
411       overloading and have different "fallback" values, that is also
412       considered a conflict. These conflicts are detected when multiple roles
413       are being composed into a class together.
414
415       When a role consumes another role, the consuming role's overloading
416       fallback and operator implementations silently "win" the conflict.
417

ROLE EXCLUSION

419       A role can say that it cannot be combined with some other role. This
420       should be used with great caution, since it limits the re-usability of
421       the role.
422
423         package Breakable;
424
425         use Moose::Role;
426
427         excludes 'BreakDancer';
428

ADDING A ROLE TO AN OBJECT INSTANCE

430       You may want to add a role to an object instance, rather than to a
431       class. For example, you may want to add debug tracing to one instance
432       of an object while debugging a particular bug. Another use case might
433       be to dynamically change objects based on a user's configuration, as a
434       plugin system.
435
436       The best way to do this is to use the "apply_all_roles()" function from
437       Moose::Util:
438
439         use Moose::Util qw( apply_all_roles );
440
441         my $car = Car->new;
442         apply_all_roles( $car, 'Breakable' );
443
444       This function can apply more than one role at a time, and will do so
445       using the normal Moose role combination system. We recommend using this
446       function to apply roles to an object. This is what Moose uses
447       internally when you call "with".
448
449   Handling required attributes for roles.
450       Application of some roles will require additional parameters being
451       specified to satisfy them, for example:
452
453           {
454               package Car;
455               use Moose;
456           }
457           {
458               package Breakable;
459               use Moose::Role;
460
461               has 'breakable_parts' => ( is => 'ro', required => 1 );
462           }
463
464           my $car = Car->new;
465
466           # next line dies with: Attribute (breakable_parts) is required
467           apply_all_roles( $car, 'Breakable' );
468
469       This will require passing the additional parameters at application time
470       as follows:
471
472           apply_all_roles( $car, 'Breakable' => {
473                   rebless_params => {
474                       # Parameters to 'Breakable'
475                       breakable_parts => [qw( tires wheels windscreen )],
476                   }
477           });
478
479       Obviously, this interface is better simplified as a method on "Car":
480
481           sub make_breakable {
482               my ( $self, %params ) = @_;
483               apply_all_roles($self, 'Breakable', { rebless_params => \%params });
484           }
485
486           my $car = Car->new();
487           $car->make_breakable( breakable_parts => [qw( tires wheels windscreen )] );
488

AUTHORS

490       ·   Stevan Little <stevan.little@iinteractive.com>
491
492       ·   Dave Rolsky <autarch@urth.org>
493
494       ·   Jesse Luehrs <doy@tozt.net>
495
496       ·   Shawn M Moore <code@sartak.org>
497
498       ·   יובל קוג'מן (Yuval Kogman) <nothingmuch@woobling.org>
499
500       ·   Karen Etheridge <ether@cpan.org>
501
502       ·   Florian Ragwitz <rafl@debian.org>
503
504       ·   Hans Dieter Pearcey <hdp@weftsoar.net>
505
506       ·   Chris Prather <chris@prather.org>
507
508       ·   Matt S Trout <mst@shadowcat.co.uk>
509
511       This software is copyright (c) 2006 by Infinity Interactive, Inc.
512
513       This is free software; you can redistribute it and/or modify it under
514       the same terms as the Perl 5 programming language system itself.
515
516
517
518perl v5.30.0                      2019-07-26           Moose::Manual::Roles(3)
Impressum