1SNMP::Info::Airespace(3U)ser Contributed Perl DocumentatiSoNnMP::Info::Airespace(3)
2
3
4

NAME

6       SNMP::Info::Airespace - SNMP Interface to data from
7       AIRESPACE-WIRELESS-MIB and AIRESPACE-SWITCHING-MIB
8

AUTHOR

10       Eric Miller
11

SYNOPSIS

13           my $airespace = new SNMP::Info(
14                                 AutoSpecify => 1,
15                                 Debug       => 1,
16                                 DestHost    => 'myswitch',
17                                 Community   => 'public',
18                                 Version     => 2
19                               )
20
21           or die "Can't connect to DestHost.\n";
22
23           my $class = $airespace->class();
24           print " Using device sub class : $class\n";
25

DESCRIPTION

27       SNMP::Info::Airespace is a subclass of SNMP::Info that provides an
28       interface to AIRESPACE-WIRELESS-MIB and AIRESPACE-SWITCHING-MIB.  These
29       MIBs are used in Airespace wireless switches, as well as, products from
30       Cisco, Nortel, and Alcatel which are based upon the Airespace platform.
31
32       The Airespace platform utilizes intelligent wireless switches which
33       control thin access points.  The thin access points themselves are
34       unable to be polled for end station information.
35
36       This class emulates bridge functionality for the wireless switch. This
37       enables end station MAC addresses collection and correlation to the
38       thin access point the end station is using for communication.
39
40       Use or create a subclass of SNMP::Info that inherits this one.  Do not
41       use directly.
42
43   Inherited Classes
44       None.
45
46   Required MIBs
47       AIRESPACE-WIRELESS-MIB
48       AIRESPACE-SWITCHING-MIB
49

GLOBALS

51       These are methods that return scalar value from SNMP
52
53       $airespace->airespace_type()
54           ("agentInventoryMachineType")
55
56       $airespace->airespace_model()
57           ("agentInventoryMachineModel")
58
59       $airespace->airespace_serial()
60           ("agentInventorySerialNumber")
61
62       $airespace->airespace_maint_ver()
63           ("agentInventoryMaintenanceLevel")
64
65       $airespace->airespace_mac()
66           ("agentInventoryBurnedInMacAddress")
67
68       $airespace->airespace_os()
69           ("agentInventoryOperatingSystem")
70
71       $airespace->airespace_vendor()
72           ("agentInventoryManufacturerName")
73
74       $airespace->airespace_prod_name()
75           ("agentInventoryProductName")
76
77       $airespace->os_ver()
78           ("agentInventoryProductVersion")
79
80       $airespace->airespace_bssid_mode()
81           ("agentNetworkBroadcastSsidMode")
82
83       $airespace->airespace_mc_mode()
84           ("agentNetworkMulticastMode")
85
86       $airespace->airespace_lwapp_mode()
87           The LWAPP transport mode decides if the switch is operating in the
88           Layer2 or Layer3 mode.
89
90           ("agentSwitchLwappTransportMode")
91
92       $airespace->airespace_ul_mode()
93           Transfer upload mode configures the mode to use when uploading from
94           the switch.  Normal usage tftp.
95
96           ("agentTransferUploadMode")
97
98       $airespace->airespace_ul_ip()
99           Transfer upload tftp server ip configures the IP address of the
100           server. It is valid only when the Transfer Mode is tftp.
101
102           ("agentTransferUploadServerIP")
103
104       $airespace->airespace_ul_path()
105           Transfer upload tftp path configures the directory path where the
106           file is to be uploaded to. The switch remembers the last file path
107           used.
108
109           ("agentTransferUploadPath")
110
111       $airespace->airespace_ul_file()
112           ("agentTransferUploadFilename")
113
114       $airespace->airespace_ul_type()
115           Transfer upload datatype configures the type of file to upload from
116           the switch.
117
118               The types for upload are:
119               config(2)
120               errorlog(3)
121               systemtrace(4)
122               traplog(5)
123               crashfile(6)
124
125           ("agentTransferUploadDataType")
126
127       $airespace->airespace_ul_start()
128           ("agentTransferUploadStart")
129
130       $airespace->airespace_ul_status()
131           ("agentTransferUploadStatus")
132
133   Overrides
134       $airespace->layers()
135           Returns 00000111.  Class emulates Layer 2 functionality for Thin
136           APs through proprietary MIBs.
137
138       $airespace->serial()
139           ("agentInventorySerialNumber")
140

TABLE METHODS

142       These are methods that return tables of information in the form of a
143       reference to a hash.
144
145       $airespace->i_ssidlist()
146           Returns reference to hash.  SSID's recognized by the radio
147           interface.
148
149       $airespace->i_ssidbcast()
150           Returns reference to hash.  Indicates whether the SSID is
151           broadcast.
152
153       $airespace->i_80211channel()
154           Returns reference to hash.  Current operating frequency channel of
155           the radio interface.
156
157       $airespace->dot11_cur_tx_pwr_mw()
158           Returns reference to hash.  Current transmit power, in milliwatts,
159           of the radio interface.
160
161       $airespace->i_ssidmac()
162           With the same keys as i_ssidlist, returns the Basic service set
163           identification (BSSID), MAC address, the AP is using for the SSID.
164
165   Dot11 Ess Table  ("bsnDot11EssTable")
166       Ess(WLAN) Configuration Table. Maximum of 17 WLANs can be created on
167       Airespace Switch. Index of 17 is reserved for WLAN for Third Party
168       APs(non-Airespace APs).
169
170       $airespace->airespace_ess_idx()
171           ("bsnDot11EssIndex")
172
173       $airespace->airespace_ess_ssid()
174           SSID assigned to ESS(WLAN)
175
176           ("bsnDot11EssSsid")
177
178       $airespace->airespace_ess_macflt()
179           Select to filter clients by MAC address.  By selecting this
180           Security, you need to create MAC Filters in "bsnUsersTable" or have
181           MAC Filters configured on Radius Servers specified in
182           "bsnRadiusAuthenticationTable"
183
184           ("bsnDot11EssMacFiltering")
185
186       $airespace->airespace_ess_status()
187           Administrative Status of ESS(WLAN).
188
189           ("bsnDot11EssAdminStatus")
190
191       $airespace->airespace_ess_sec_auth()
192           Type of 802.11 Authentication.
193
194           ("bsnDot11EssSecurityAuthType")
195
196       $airespace->airespace_ess_radio_pol()
197           Radio Policy for a WLAN. It can either be All where it will be
198           applicable to ALL types of protocols or it can be set to apply to
199           combinations of 802.11a, 802.11b, 802.11g.
200
201           ("bsnDot11EssRadioPolicy")
202
203       $airespace->airespace_ess_qos()
204           Quality of Service for a WLAN.
205
206           ("bsnDot11EssQualityOfService")
207
208       $airespace->airespace_ess_ifname()
209           Name of the interface used by this WLAN.
210
211           ("bsnDot11EssInterfaceName")
212
213       $airespace->airespace_ess_aclname()
214           Name of ACL for the WLAN. This is applicable only when Web
215           Authentication is enabled.
216
217           ("bsnDot11EssAclName")
218
219       $airespace->airespace_ess_bcast()
220           This attribute when enabled allows the switch to broadcast this
221           SSID.
222
223           ("bsnDot11EssBroadcastSsid")
224
225   AP Table ("bsnAPTable")
226       Table of Airespace APs managed by this Airespace Switch.
227
228       $airespace->airespace_ap_mac()
229           The MAC address of the 802.3 interface of the AP.
230
231           ("bsnAPDot3MacAddress")
232
233       $airespace->airespace_ap_name()
234           Name assigned to this AP. If an AP is not configured its factory
235           default name will be ap:<last three byte of MAC Address>.  e.g.
236           ap:af:12:be
237
238           ("bsnAPName")
239
240       $airespace->airespace_ap_ip()
241           Ip address of the AP. This will not be available when the switch is
242           operating in the Layer2 mode. In this case, the attribute will
243           return 0 as value.
244
245           ("bsnApIpAddress")
246
247       $airespace->airespace_ap_loc()
248           User specified location of this AP.
249
250           ("bsnAPLocation")
251
252       $airespace->airespace_ap_sw()
253           ("bsnAPSoftwareVersion")
254
255       $airespace->airespace_ap_fw()
256           ("bsnAPBootVersion")
257
258       $airespace->airespace_ap_model()
259           ("bsnAPModel")
260
261       $airespace->airespace_ap_serial()
262           ("bsnAPSerialNumber")
263
264       $airespace->airespace_ap_type()
265           ("bsnAPType")
266
267       $airespace->airespace_ap_status()
268           ("bsnAPAdminStatus")
269
270   AP Interface Table ("bsnAPIfTable")
271       Table of 802.11 interfaces in an Airespace APs.
272
273       $airespace->airespace_apif_slot()
274           The slot Id of this interface. Value will be 0 for a 802.11a (5Ghz)
275           interface and will be 1 for 802.11b/g (2.4Ghz) interface.
276
277           ("bsnAPIfSlotId")
278
279       $airespace->airespace_apif_type()
280           ("bsnAPIfType")
281
282       $airespace->airespace_apif_ch_num()
283           ("bsnAPIfPhyChannelNumber")
284
285       $airespace->airespace_apif_power()
286           The transmit power level N currently being used to transmit data.
287
288           ("bsnAPIfPhyTxPowerLevel")
289
290       $airespace->airespace_apif()
291           ("bsnAPIfOperStatus")
292
293       $airespace->airespace_apif_oride()
294           This flag when disabled implies that all WLANs are available from
295           this radio.  However, if this is enabled, then only those WLANs
296           that appear in the ("bsnApIfWlanOverrideTable") will be available
297           from this radio.
298
299           ("bsnAPIfWlanOverride")
300
301       $airespace->airespace_apif_admin()
302           ("bsnAPIfAdminStatus")
303
304       $airespace->airespace_apif_a_pwr()
305           List of comma separated absolute power levels supported by the
306           radio.
307
308           ("bsnAPIfAbsolutePowerList")
309
310   Mobile Station Table ("bsnMobileStationTable")
311       $airespace->airespace_sta_mac()
312           Mac Address of the AP on which Mobile Station is associated.
313
314           ("bsnMobileStationAPMacAddr")
315
316       $airespace->airespace_sta_slot()
317           Slot Id of AP If on which mobile station is associated.
318
319           ("bsnMobileStationAPIfSlotId")
320
321       $airespace->airespace_sta_ess_idx()
322           Ess Index of the Wlan(SSID) that is being used by Mobile Station to
323           connect to the AP.
324
325           ("bsnMobileStationEssIndex")
326
327       $airespace->airespace_sta_ssid()
328           The SSID Advertised by the Mobile Station.
329
330           ("bsnMobileStationSsid")
331
332       $airespace->airespace_sta_delete()
333           Action to Deauthenticate the Mobile Station. Set the State to
334           delete.
335
336           ("bsnMobileStationDeleteAction")
337
338   Users Table ("bsnUsersTable")
339       The (conceptual) table listing Wlan Users.
340
341       $airespace->airespace_user_name()
342           User name.  For MAC filters, this will be the MAC address (e.g.
343           000123456789).
344
345           ("bsnUserName")
346
347       $airespace->airespace_user_pw()
348           User Password.  For MAC filters, this will be "nopassword".
349
350           ("bsnUserPassword")
351
352       $airespace->airespace_user_ess_idx()
353           User WLAN ID. Value 0 implies that this applies to any WLAN ID.
354
355           ("bsnUserEssIndex")
356
357       $airespace->airespace_user_access()
358           For MAC filters, this will be "readOnly".
359
360           ("bsnUserAccessMode")
361
362       $airespace->airespace_user_type()
363           User Access Mode. For MAC filters, this will be "macFilter".
364
365           ("bsnUserType")
366
367       $airespace->airespace_user_ifname()
368           ACL for MAC Filters.  An interface name from
369           "agentInterfaceConfigTable"
370
371           ("bsnUserInterfaceName")
372
373       $airespace->airespace_user_rstat()
374           ("bsnUserRowStatus")
375
376   Black List Client Table ("bsnBlackListClientTable")
377       The table listing Wlan Black Listed Clients
378
379       $airespace->airespace_bl_mac()
380           ("bsnBlackListClientMacAddress")
381
382       $airespace->airespace_bl_descr()
383           ("bsnBlackListClientDescription")
384
385       $airespace->airespace_bl_rstat()
386           ("bsnBlackListClientRowStatus")
387
388   AP Interface WLAN Override Table ("bsnAPIfWlanOverrideTable")
389       Each entry represents an SSID added to the AP when the attribute
390       "bsnAPIfWlanOverride" on the radio is enabled.  This means only those
391       WLANs on the switch that are added to this table will be available on
392       such a radio.
393
394       $airespace->airespace_oride_id()
395           Index of the WLAN ("bsnDot11EssIndex") added to the radio.
396
397           ("bsnAPIfWlanOverrideId")
398
399       $airespace->airespace_oride_ssid()
400           SSID assigned to the override WLAN.
401
402           ("bsnAPIfWlanOverrideSsid")
403
404   Interface Config Table ("agentInterfaceConfigTable")
405       A table of the switch's Interface Config entries. Typically, it will
406       contain entries   for Service Port Interface, DS Port Interface and
407       Virtual Gateway Interface apart from other entries.
408
409       $airespace->airespace_if_name()
410           Interface Name. This values is 'management' for DS port,
411           'service-port' for service port and 'virtual' for virtual gateway.
412           For other interfaces, the name can be anything. These interfaces
413           are already created by default.
414
415           ("agentInterfaceName")
416
417       $airespace->airespace_if_vlan()
418           VLAN Id configured for the Interface.
419
420           ("agentInterfaceVlanId")
421
422       $airespace->airespace_if_type()
423           The interface's type. The static type is set for the interfaces
424           that are created by default on the switch and these cannot be
425           deleted. Any other interface that is created is of type dynamic
426           which can be deleted.
427
428           ("agentInterfaceType")
429
430       $airespace->airespace_if_mac()
431           Interface MAC Address. This is only applicable in case of
432           management and service-port interfaces.
433
434           ("agentInterfaceMacAddress")
435
436       $airespace->airespace_if_ip()
437           ("agentInterfaceIPAddress")
438
439       $airespace->airespace_if_mask()
440           ("agentInterfaceIPNetmask")
441
442       $airespace->airespace_if_acl()
443           Name of the Access Control List applied to the interface. This
444           attribute is applicable only to the management interface and other
445           dynamic interfaces.  If it is required to remove the ACL name for
446           an interface, it should be set to an empty string.
447
448           ("agentInterfaceAclName")
449
450       $airespace->airespace_if_rstat()
451           ("agentInterfaceRowStatus")
452
453   Port Config Table ("agentPortConfigTable")
454       $airespace->airespace_duplex_admin()
455           ("agentPortPhysicalMode")
456
457       $airespace->airespace_duplex()
458           ("agentPortPhysicalStatus")
459
460   Overrides
461       $airespace->i_index()
462           Returns reference to map of IIDs to Interface index.
463
464           Extends "ifIndex" to support thin APs and WLAN virtual interfaces
465           as device interfaces.
466
467       $airespace->interfaces()
468           Returns reference to map of IIDs to ports.  Thin APs are
469           implemented as device interfaces.  The thin AP MAC address
470           airespace_ap_mac() and Slot ID airespace_apif_slot() are used as
471           the port identifier.  Virtual interfaces use airespace_if_name() as
472           the port identifier.
473
474       $airespace->i_name()
475           Returns reference to map of IIDs to interface names.  Returns
476           "ifName" for Ethernet interfaces, airespace_ap_name() for thin AP
477           interfaces, and airespace_if_name() for virtual interfaces.
478
479       $airespace->i_description()
480           Returns reference to map of IIDs to interface descriptions.
481           Returns "ifDescr" for Ethernet interfaces, airespace_ap_loc() for
482           thin AP interfaces, and airespace_if_name() for virtual interfaces.
483
484       $airespace->i_type()
485           Returns reference to map of IIDs to interface types.  Returns
486           "ifType" for Ethernet interfaces, airespace_apif_type() for thin AP
487           interfaces, and airespace_if_type() for virtual interfaces.
488
489       $airespace->i_up()
490           Returns reference to map of IIDs to link status of the interface.
491           Returns "ifOperStatus" for Ethernet interfaces and airespace_apif()
492           for thin AP interfaces.
493
494       $airespace->i_up_admin()
495           Returns reference to map of IIDs to administrative status of the
496           interface.  Returns "ifAdminStatus" for Ethernet interfaces and
497           airespace_apif_admin() for thin AP interfaces.
498
499       $airespace->i_mac()
500           Returns reference to map of IIDs to MAC address of the interface.
501           Returns "ifPhysAddress" for Ethernet interfaces and
502           airespace_if_mac() for virtual interfaces.
503
504       $airespace->i_vlan()
505           Returns reference to map of IIDs to VLAN ID of the interface.
506           Returns airespace_if_vlan() for virtual interfaces.
507
508       $airespace->i_duplex()
509           Returns reference to map of IIDs to current link duplex.  Ethernet
510           interfaces only.
511
512       $airespace->i_duplex_admin()
513           Returns reference to hash of IIDs to admin duplex setting.
514           Ethernet interfaces only.
515
516       $airespace->ip_index()
517           Extends table by mapping airespace_if_ip() to the interface IID.
518
519       $airespace->ip_netmask()
520           Extends IP table by mapping airespace_if_mask() to
521           airespace_if_ip()
522
523       $airespace->bp_index()
524           Simulates bridge MIB by returning reference to a hash mapping
525           i_index() to the interface iid.
526
527       $airespace->fw_port()
528           Returns reference to a hash, value being airespace_sta_mac() and
529           airespace_sta_slot() combined to match the interface iid.
530
531       $airespace->fw_mac()
532           ("bsnMobileStationMacAddress")
533
534   Pseudo ENTITY-MIB information
535       These methods emulate ENTITY-MIB Physical Table methods using
536       AIRESPACE-SWITCHING-MIB and AIRESPACE-WIRELESS-MIB.  Thin APs are
537       included as subcomponents of the wireless controller.
538
539       $airespace->e_index()
540           Returns reference to hash.  Key: IID and Value: Integer. The index
541           for APs is created with an integer representation of the last three
542           octets of the AP MAC address.
543
544       $airespace->e_class()
545           Returns reference to hash.  Key: IID, Value: General hardware type.
546           Return ap for wireless access points.
547
548       $airespace->e_descr()
549           Returns reference to hash.  Key: IID, Value: Human friendly name.
550
551       $airespace->e_model()
552           Returns reference to hash.  Key: IID, Value: Model name.
553
554       $airespace->e_name()
555           More computer friendly name of entity.  Name is either 'WLAN
556           Controller' or 'AP'.
557
558       $airespace->e_vendor()
559           Returns reference to hash.  Key: IID, Value: cisco.
560
561       $airespace->e_serial()
562           Returns reference to hash.  Key: IID, Value: Serial number.
563
564       $airespace->e_pos()
565           Returns reference to hash.  Key: IID, Value: The relative position
566           among all entities sharing the same parent.
567
568       $airespace->e_type()
569           Returns reference to hash.  Key: IID, Value: Type of component.
570
571       $airespace->e_fwver()
572           Returns reference to hash.  Key: IID, Value: Firmware revision.
573
574       $airespace->e_swver()
575           Returns reference to hash.  Key: IID, Value: Software revision.
576
577       $airespace->e_parent()
578           Returns reference to hash.  Key: IID, Value: The value of e_index()
579           for the entity which 'contains' this entity.
580
581   Arp Cache Table Augmentation
582       The controller has knowledge of MAC->IP mappings for wireless clients.
583       Augmenting the arp cache data with these MAC->IP mappings enables
584       visibility for stations that only communicate locally.
585
586       $airespace->at_paddr()
587           Adds MAC addresses extracted from the index of
588           "bsnMobileStationIpAddress".
589
590       $airespace->at_netaddr()
591           Adds IP addresses from "bsnMobileStationIpAddress".
592

Data Munging Callback Subroutines

594       munge_64bits()
595           Truncate packet values to 32 bits.
596
597
598
599perl v5.30.0                      2019-10-30          SNMP::Info::Airespace(3)
Impressum