1SCHROOT-SETUP(5)                 Debian sbuild                SCHROOT-SETUP(5)
2
3
4

NAME

6       schroot-setup - schroot chroot setup scripts
7

DESCRIPTION

9       schroot  uses  scripts  to set up and then clean up the chroot environ‐
10       ment.  The directory /etc/schroot/setup.d contains scripts run  when  a
11       chroot is created and destroyed.  Several environment variables are set
12       while the scripts are being run, which allows  their  behaviour  to  be
13       customised, depending upon, for example, the type of chroot in use.
14
15       The  scripts are run in name order, like those run by init(8), by using
16       the same style of execution as run-parts(8).
17
18       The setup scripts are all invoked with two options:
19
20       1      The action to perform.
21
22              When a session is first started, the chroot is set up by running
23              the  scripts  in  /etc/schroot/setup.d  with  the  ‘setup-start’
24              option.  When the session is ended,  the  scripts  in  /etc/sch‐
25              root/setup.d  are  run  in  reverse  order with the ‘setup-stop’
26              option.
27
28       2      The chroot status.
29
30              This is either ‘ok’ if there are no problems, or ‘fail’ if some‐
31              thing  went  wrong.   For  example,  particular  actions  may be
32              skipped on failure.
33
34       Note that the scripts should be idempotent.  They  must  be  idempotent
35       during  the ‘setup-stop’ phase, because they may be run more than once,
36       for example on failure.
37

ENVIRONMENT

39   General variables
40       AUTH_USER
41              The username of the user the command in the chroot will run as.
42
43       CHROOT_NAME
44              The chroot name.  Note that this is  the  name  of  the  orignal
45              chroot before session creation; you probably want SESSION_ID.
46
47       LIBEXEC_DIR
48              The directory under which helper programs are located.
49
50       MOUNT_DIR
51              The  directory  under  which  non-filesystem chroots are mounted
52              (e.g. block devices and LVM snapshots).
53
54       PID    The process ID of the schroot process.
55
56       PLATFORM
57              The operating system platform schroot is running upon.  This may
58              be  used to introduce platform-specific behaviour into the setup
59              scripts where required.  Note that the HOST variables are proba‐
60              bly  what are required.  In the context of schroot, the platform
61              is the supported configuration and behaviour for a given  archi‐
62              tecture, and may be identical between different architectures.
63
64       SESSION_ID
65              The session identifier.
66
67       VERBOSE
68              Set  to  ‘quiet’ if only error messages should be printed, ‘nor‐
69              mal’ if other messages may be printed as well, and ‘verbose’  if
70              all messages may be printed.  Previously called AUTH_VERBOSITY.
71
72       CHROOT_SESSION_CREATE
73              Set to ‘true’ if a session will be created, otherwise ‘false’.
74
75       CHROOT_SESSION_CLONE
76              Set to ‘true’ if a session will be cloned, otherwise ‘false’.
77
78       CHROOT_SESSION_PURGE
79              Set to ‘true’ if a session will be purged, otherwise ‘false’.
80
81       CHROOT_SESSION_SOURCE
82              Set to ‘true’ if a session will be created from a source chroot,
83              otherwise ‘false’.
84
85       CHROOT_TYPE
86              The type of the chroot.  This is useful for restricting a  setup
87              task  to  particular types of chroot (e.g. only block devices or
88              LVM snapshots).
89
90       CHROOT_NAME
91              The name of the chroot.  This is useful for restricting a  setup
92              task to a particular chroot, or set of chroots.
93
94       CHROOT_ALIAS
95              The name of the alias used to select the chroot.  This is useful
96              for specialising a setup task based upon one of its  alternative
97              alias  names, or the default chroot name.  For example, it could
98              be used to specify additional sources in  /etc/apt/sources.list,
99              such  as  a  stable-security  alias  for  a stable chroot, or an
100              experimental alias for an unstable chroot.
101
102       CHROOT_DESCRIPTION
103              The description of the chroot.
104
105       CHROOT_MOUNT_LOCATION
106              The location to mount the chroot.  It is used  for  mount  point
107              creation and mounting.
108
109       CHROOT_LOCATION
110              The  location  of the chroot inside the mount point.  This is to
111              allow multiple chroots on a  single  filesystem.   Set  for  all
112              mountable chroot types.
113
114       CHROOT_PATH
115              The   absolute   path   to   the   chroot.   This  is  typically
116              CHROOT_MOUNT_LOCATION and CHROOT_LOCATION concatenated together.
117              This is the path which should be used to access the chroots.
118
119   Plain and directory chroot variables
120       These chroot types use only general variables.
121
122   File variables
123       CHROOT_FILE
124              The file containing the chroot files.
125
126       CHROOT_FILE_REPACK
127              Set  to ‘true’ to repack the chroot into an archive file on end‐
128              ing a session, otherwise ‘false’.
129
130   Mountable chroot variables
131       These variables are only set for directly mountable chroot types.
132
133       CHROOT_MOUNT_DEVICE
134              The device to mount containing the chroot.  mounting.
135
136       CHROOT_MOUNT_OPTIONS
137              Options to pass to mount(8).
138
139       CHROOT_LOCATION
140              The location of the chroot inside the mount point.  This  allows
141              the existence of multiple chroots on a single filesystem.
142
143   Filesystem union variables
144       CHROOT_UNION_TYPE
145              Union filesystem type.
146
147       CHROOT_UNION_MOUNT_OPTIONS
148              Union filesystem mount options.
149
150       CHROOT_UNION_OVERLAY_DIRECTORY
151              Union filesystem overlay directory (writable).
152
153       CHROOT_UNION_UNDERLAY_DIRECTORY
154              Union filesystem underlay directory (read-only).
155
156   Block device variables
157       CHROOT_DEVICE
158              The  device containing the chroot root filesystem.  This is usu‐
159              ally, but not necessarily, the device  which  will  be  mounted.
160              For  example,  an LVM snapshot this will be the original logical
161              volume.
162
163   LVM snapshot variables
164       CHROOT_LVM_SNAPSHOT_NAME
165              Snapshot name to pass to lvcreate(8).
166
167       CHROOT_LVM_SNAPSHOT_DEVICE
168              The name of the LVM snapshot device.
169
170       CHROOT_LVM_SNAPSHOT_OPTIONS
171              Options to pass to lvcreate(8).
172
173   Custom variables
174       Custom keys set in schroot.conf will be uppercased and set in the envi‐
175       ronment as described in schroot.conf(5).
176

FILES

178   Setup script configuration
179       The  directory  /etc/schroot/default contains the default settings used
180       by setup scripts.
181
182       config Main configuration file read by setup scripts.   The  format  of
183              this file is described in schroot-script-config(5).  This is the
184              default value for the script-config key.   Note  that  this  was
185              formerly   named  /etc/schroot/script-defaults.   The  following
186              files are referenced by default:
187
188       copyfiles
189              A list of files to copy into the chroot from  the  host  system.
190              Note   that   this   was   formerly   named   /etc/schroot/copy‐
191              files-defaults.
192
193       fstab  A file in  the  format  decribed  in  fstab(5),  used  to  mount
194              filesystems  inside  the chroot.  The mount location is relative
195              to the root of the chroot.  Note that this  was  formerly  named
196              /etc/schroot/mount-defaults.
197
198       nssdatabases
199              System   databases   (as   described  in  /etc/nsswitch.conf  on
200              GNU/Linux systems) to copy into the chroot from the host.   Note
201              that this was formerly named /etc/schroot/nssdatabases-defaults.
202
203   Setup scripts
204       The directory /etc/schroot/setup.d contains the chroot setup scripts.
205
206       00check
207              Print debugging diagnostics and perform basic sanity checking.
208
209       05file Unpack, clean up, and repack file-based chroots.
210
211       05fsunion
212              Create and remove union filesystems.
213
214       05lvm  Create and remove LVM snapshots.
215
216       10mount
217              Mount and unmount filesystems.
218
219       15binfmt
220              Sets  up the QEMU user emulator using binfmt-support.  This per‐
221              mits a chroot for a different CPU architecture to be used trans‐
222              parently,  providing an alternative to cross-compiling or whole-
223              machine emulation.
224
225       15killprocs
226              Kill processes still running inside the  chroot  when  ending  a
227              session,  which  would  prevent  unmounting  of  filesystems and
228              cleanup of any other resources.
229
230       20copyfiles
231              Copy files from the host system into the chroot.  Configure net‐
232              working by copying hosts and resolv.conf, for example.
233
234       20nssdatabases
235              Configure system databases by copying passwd, shadow, group etc.
236              into the chroot.
237
238       50chrootname
239              Set the chroot name (/etc/debian_chroot) in  the  chroot.   This
240              may be used by the shell prompt to display the current chroot.
241

AUTHORS

243       Roger Leigh.
244
246       Copyright © 2005-2012  Roger Leigh <rleigh@debian.org>
247
248       schroot  is  free  software:  you  can redistribute it and/or modify it
249       under the terms of the GNU General Public License as published  by  the
250       Free  Software Foundation, either version 3 of the License, or (at your
251       option) any later version.
252

SEE ALSO

254       schroot(1),   fstab(5),   schroot.conf(5),    schroot-script-config(5),
255       run-parts(8).
256
257
258
259Version 1.6.10                    05 May 2014                 SCHROOT-SETUP(5)
Impressum