1DROBOM(16)                       drobo manager                      DROBOM(16)
2
3
4

NAME

6       drobom - CLI for managing data robotics (drobo) storage units
7

SYNOPSIS

9       drobom [ options ] <command> [ arguments... ]
10

DESCRIPTION

12   options is one of:
13       -c, --command
14              the command to execute.
15
16       -d, --device
17              the device to operate on (default searches all devices and picks
18              first one found.)
19
20       -h, --help
21              print a usage message
22
23       -n, --no
24              answer all questions no (generally does not do any damage)
25
26       -s, --string <string>
27              sometimes new models are not recognized by drobom. See  documen‐
28              tation.
29
30       -v, --verbose
31              verbosity,  a  bit-field  to trigger increased output as needed,
32              mostly for debugging.  1 - General, 2 -  Hardware  Dialog,  4  -
33              Initiation,  8 - Raw returns, 16- Detection 64 will print every‐
34              thing... (default: 0, as terse as possible.)  128 enables  simu‐
35              lation mode (for testing when no Drobo is available. Dangerous!)
36
37       -V, --version
38              print the version id.
39
40        -y, --yes
41              answer all questions yes (generally overwrites stuff)
42
43
44
45   command is one of:
46       blink  identify the drobo by making the lights blink
47
48       diag   dump diagnostics file into /tmp directory
49
50       diagprint <diagdumpfile>
51              print diagnostics file to standard output
52
53              <diagdumpfile> the diagnostic dump file to read.
54
55       fwcheck query drobo.com for updates to firmware for the given Drobo
56
57       fwload  <fwimage>
58              load a specific firmware for the given Drobo. Arguments:
59
60              <fwimage> the firmware file to load.
61
62       fwupgrade
63              upgrade  the firmware to the latest and greatest, recommended by
64              DRI
65
66       help   print this text
67
68       info  <toprint>
69              print information on a Drobo. The <toprint> argument is a  comma
70              separated  list  of the values below (default is to print all of
71              them): config, capacity, protocol,  settings,  slots,  firmware,
72              status, options, luns, scsi
73
74       list   show device files for all Drobos found.
75
76       set <options> <value>
77              set  firmware  options, such as ipaddress, etc... use 'info set‐
78              tings'
79
80       set name  <newname>
81              Set the name of the Drobo to the given value ( only  firmware  >
82              1.3.0 supports this command )
83
84       set lunsize  Set the size of LUNS on device. Arguments:
85
86              <sz> integer number of TiB to set the lunsize to
87
88              Note:  After execution, Drobo reboots, wait a few minutes before
89              accessing again
90
91       set time - sets various Drobo's clock to UTC
92
93       shutdown
94              shutdown drobo (DRI calls this 'standby')
95
96       status report how is the Drobo doing
97
98   device
99       raw block device of a drobo (i.e. /dev/sdz) . If not given, assumes all
100       attached drobos.
101
102       view   Start up the graphical user interface.
103
104

AUTHOR

106       This  manual  page  was written by Chris AtLee <chris@atlee.ca> for the
107       Debian project (but may be used by others).
108
109
110
1112009                                October                         DROBOM(16)
Impressum