1IDCMI(8)                    System Manager's Manual                   IDCMI(8)
2
3
4

NAME

6       ipmiutil_dcmi - handle DCMI functions
7
8

SYNOPSIS

10       ipmiutil dcmi [-admsx -NUPREFTVY] <function>
11
12

DESCRIPTION

14       This  ipmiutil dcmi subcommand handles DCMI command functions according
15       to the DCMI specification.
16
17       This utility can use either the /dev/ipmi0 driver  from  OpenIPMI,  the
18       /dev/imb  driver  from  Intel,  the  /dev/ipmikcs  driver from valinux,
19       direct user-space IOs, or the IPMI LAN interface if -N.
20
21

OPTIONS

23       Command line options are described below.
24
25       -a string
26              Set the DCMI Asset Tag to this string.
27
28       -d string
29              Set the DCMI MC ID to this string.
30
31       -m 002000
32              Target a specific MC (e.g. bus 00, sa 20, lun 00).   This  could
33              be  used  for PICMG or ATCA blade systems.  The trailing charac‐
34              ter, if present,  indicates  SMI  addressing  if  's',  or  IPMB
35              addressing if 'i' or not present.
36
37       -s     When getting info, also get the DCMI sensor information.
38
39       -x     Causes extra debug messages to be displayed.
40
41       -N nodename
42              Nodename  or IP address of the remote target system.  If a node‐
43              name is specified, IPMI LAN interface is  used.   Otherwise  the
44              local system management interface is used.
45
46       -U rmt_user
47              Remote  username  for the nodename given.  The default is a null
48              username.
49
50       -P/-R rmt_pswd
51              Remote password for the nodename given.  The default is  a  null
52              password.
53
54       -E     Use the remote password from Environment variable IPMI_PASSWORD.
55
56       -F drv_t
57              Force  the  driver  type  to one of the followng: imb, va, open,
58              gnu, landesk, lan, lan2, lan2i, kcs, smb.  Note that lan2i means
59              lan2  with  intelplus.   The  default is to detect any available
60              driver type and use it.
61
62       -J     Use  the  specified  LanPlus   cipher   suite   (0   thru   17):
63              0=none/none/none,       1=sha1/none/none,      2=sha1/sha1/none,
64              3=sha1/sha1/cbc128,  4=sha1/sha1/xrc4_128,  5=sha1/sha1/xrc4_40,
65              6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.
66
67       -T     Use  a  specified  IPMI  LAN Authentication Type: 0=None, 1=MD2,
68              2=MD5, 4=Straight Password, 5=OEM.
69
70       -V     Use a specified IPMI  LAN  privilege  level.  1=Callback  level,
71              2=User level, 3=Operator level, 4=Administrator level (default),
72              5=OEM level.
73
74       -Y     Yes, do prompt the  user  for  the  IPMI  LAN  remote  password.
75              Alternatives for the password are -E or -P.
76
77

FUNCTIONS

79       info   Get DCMI Capabilities, MC ID, and Asset Tag. This is the default
80              function if no function was specified.
81
82
83       power  Get DCMI Power reading and DCMI Power limit, if supported in the
84              DCMI capabilties.
85
86       power set_limit
87              Set Power limit
88
89       power set_action <action>
90              Set  Power  limit  exception  action (where action = no_action |
91              power_off | log_sel)
92
93       power set_correction
94              Set Power limit correction time (in ms)
95
96       power set_sample
97              Set Power limit sampling period (in sec)
98
99       power activate
100              Activate Power limit
101
102       power deactivate
103              Deactivate Power limit
104
105
106
107       thermal
108              Get/Set DCMI Thermal parameters.  This requires  DCMI  1.5  sup‐
109              port.
110
111
112       config Get/Set  DCMI  Configuration parameters.  This requires DCMI 1.5
113              support.
114
115
116       help   Show the help (usage) message
117
118

EXAMPLES

120       ipmiutil dcmi info -s
121       Gets DCMI information, plus DCMI sensor information
122
123       ipmiutil dcmi -N 192.168.1.1 -U root -P pswd
124       Gets DCMI information over IPMI LAN.
125
126
127

SEE ALSO

129       ipmiutil(8)  ialarms(8)  iconfig(8)  idiscover(8)  ievents(8)   ifru(8)
130       igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8)
131       isol(8) iwdt(8)
132
133

WARNINGS

135       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil
136       and any bug fix list.
137
138
140       Copyright (C) 2010  Kontron America, Inc.
141
142       See  the  file  COPYING  in the distribution for more details regarding
143       redistribution.
144
145       This utility is distributed in the hope that it  will  be  useful,  but
146       WITHOUT ANY WARRANTY.
147
148

AUTHOR

150       Andy Cress <arcress at users.sourceforge.net>
151
152
153
154
155                           Version 1.0: 02 Feb 2012                   IDCMI(8)
Impressum