1IDELLOEM(8)                 System Manager's Manual                IDELLOEM(8)
2
3
4

NAME

6       ipmiutil_delloem - OEM commands for Dell servers
7

SYNOPSIS

9       ipmiutil delloem [-mx -NPRUEFJTVY] commands
10
11

DESCRIPTION

13       ipmiutil delloem commands is a program that uses Dell OEM IPMI commands
14       to perform platform-specific functions.
15
16

OPTIONS

18       -m 002000
19              Show FRU for a specific MC (e.g. bus 00, sa 20, lun  00).   This
20              could  be  used  for  PICMG or ATCA blade systems.  The trailing
21              character, if present, indicates SMI addressing if 's', or  IPMB
22              addressing if 'i' or not present.
23
24       -x     Causes extra debug messages to be displayed.
25
26       -N nodename
27              Nodename  or IP address of the remote target system.  If a node‐
28              name is specified, IPMI LAN interface is  used.   Otherwise  the
29              local system management interface is used.
30
31       -P/-R rmt_pswd
32              Remote  password  for the nodename given.  The default is a null
33              password.
34
35       -U rmt_user
36              Remote username for the nodename given.  The default is  a  null
37              username.
38
39       -E     Use the remote password from Environment variable IPMI_PASSWORD.
40
41       -F drv_t
42              Force  the  driver  type  to one of the followng: imb, va, open,
43              gnu, landesk, lan, lan2, lan2i, kcs, smb.  Note that lan2i means
44              lan2  with  intelplus.   The  default is to detect any available
45              driver type and use it.
46
47       -J     Use  the  specified  LanPlus   cipher   suite   (0   thru   17):
48              0=none/none/none,       1=sha1/none/none,      2=sha1/sha1/none,
49              3=sha1/sha1/cbc128,  4=sha1/sha1/xrc4_128,  5=sha1/sha1/xrc4_40,
50              6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.
51
52       -T     Use  a  specified  IPMI  LAN Authentication Type: 0=None, 1=MD2,
53              2=MD5, 4=Straight Password, 5=OEM.
54
55       -V     Use a specified IPMI  LAN  privilege  level.  1=Callback  level,
56              2=User level, 3=Operator level, 4=Administrator level (default),
57              5=OEM level.
58
59       -Y     Yes, do prompt the  user  for  the  IPMI  LAN  remote  password.
60              Alternatives for the password are -E or -P.
61
62

COMMANDS

64       mac list
65                 Lists the MAC address of LOMs
66
67
68       mac get <NIC number>
69                 Shows  the  MAC  address of specified LOM. 0-7 System LOM, 8-
70              DRAC/iDRAC.
71
72
73       lan set <Mode>
74                 Sets the NIC Selection Mode (dedicated, shared,
75                     shared with  failover  lom2,  shared  with  Failover  all
76              loms).
77
78
79       lan get
80                 Returns the current NIC Selection Mode (dedicated, shared,
81                  shared with failover lom2, shared with Failover all loms).
82
83
84       lan get  active
85                 Returns  the current active NIC (dedicated, LOM1, LOM2, LOM3,
86              LOM4).
87
88
89       powermonitor
90                 Shows power tracking statistics
91
92
93       powermonitor clear  cumulativepower
94                 Reset cumulative power reading
95
96
97       powermonitor clear  peakpower
98                 Reset peak power reading
99
100
101       powermonitor powerconsumption
102                 Displays power consumption in <watt|btuphr>
103
104
105       powermonitor powerconsumptionhistory  <watt|btuphr>
106                 Displays power consumption history
107
108
109       powermonitor getpowerbudget
110                 Displays power cap in <watt|btuphr>
111
112
113       powermonitor setpowerbudget  <val> <watt|btuphr|percent>
114                 Allows user to set the  power cap in <watt|BTU/hr|percentage>
115
116
117       powermonitor enablepowercap
118                 To enable set power cap
119
120
121       powermonitor disablepowercap
122                 To disable set power cap
123
124
125       windbg start
126                 Starts the windbg session (Cold Reset & SOL Activation)
127
128
129       windbg end
130                 Ends the windbg session (SOL Deactivation)
131
132
133       vFlash info Card
134                 Shows Extended SD Card information
135
136
137

SEE ALSO

139       ipmiutil(8)  ialarms(8)  iconfig(8)  icmd(8)  idiscover(8)   ievents(8)
140       ifru(8)  igetevent(8)  ihealth(8)  ilan(8) ireset(8) isel(8) isensor(8)
141       iserial(8) isol(8)
142
143

WARNINGS

145       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil
146       and any bug fix list.
147
148
150       Copyright (C) 2009  Kontron America, Inc.
151
152       See  the  file  COPYING  in the distribution for more details regarding
153       redistribution.
154
155       This utility is distributed in the hope that it  will  be  useful,  but
156       WITHOUT ANY WARRANTY.
157
158

AUTHOR

160       Andy Cress <arcress at users.sourceforge.net>
161
162
163
164
165                           Version 1.0: 17 Aug 2011                IDELLOEM(8)
Impressum