1METASYS(8)                        NUT Manual                        METASYS(8)
2
3
4

NAME

6       metasys - Driver for Meta System UPS equipment
7

NOTE

9       This man page only documents the hardware-specific features of the
10       metasys driver. For information about the core driver, see
11       nutupsdrv(8).
12

SUPPORTED HARDWARE

14       The metasys driver was written with the "Meta System UPS Protocol
15       Rev.1.12" kindly supplied from Meta System.
16
17       The driver should support all the common features of the ups models:
18
19       ·   HF Line (/2) 1-8 boards
20
21       ·   HF Millennium (810, 820)
22
23       ·   HF TOP Line (910, 920, 930, 940, 950, 970, 980)
24
25       ·   ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000)
26
27       ·   ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI)
28
29       ·   ally HF (800, 1000, 1250, 1600, 2000, 2500)
30
31       ·   Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000)
32

CABLING

34       The needed cable is a standard pin-to-pin serial cable with at least
35       pins 2, 3, and 5 (on DB9 connector) connected.
36

EXTRA ARGUMENTS

38       This driver supports no extra arguments from ups.conf(5).
39

BUGS

41       This driver has been tested on Meta System HF Millennium 820 and ally
42       HF 1000 only.
43
44       Any information about the use of the driver with the other listed UPS
45       are really welcome.
46

AUTHOR

48       Fabio Di Niro <blaxwan@users.sourceforge.net>
49

SEE ALSO

51   The core driver:
52       nutupsdrv(8)
53
54   Internet resources:
55       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
56
57
58
59Network UPS Tools 2.7.3.          12/29/2015                        METASYS(8)
Impressum