1PP-INLINE(1)          User Contributed Perl Documentation         PP-INLINE(1)
2
3
4

NAME

6       Inline::Pdlpp - Write PDL Subroutines inline with PDL::PP
7

DESCRIPTION

9       "Inline::Pdlpp" is a module that allows you to write PDL subroutines in
10       the PDL::PP style. The big benefit compared to plain "PDL::PP" is that
11       you can write these definitions inline in any old perl script (without
12       the normal hassle of creating Makefiles, building, etc).  Since version
13       0.30 the Inline module supports multiple programming languages and each
14       language has its own support module. This document describes how to use
15       Inline with PDL::PP (or rather, it will once these docs are complete
16       ";)".
17
18       For more information on Inline in general, see Inline.
19
20       Some example scripts demonstrating "Inline::Pdlpp" usage can be found
21       in the Example/InlinePdlpp directory.
22
23       "Inline::Pdlpp" is a subclass of Inline::C. Most Kudos goes to Brian I.
24

Usage

26       You never actually use "Inline::Pdlpp" directly. It is just a support
27       module for using "Inline.pm" with "PDL::PP". So the usage is always:
28
29           use Inline Pdlpp => ...;
30
31       or
32
33           bind Inline Pdlpp => ...;
34

Examples

36       Pending availability of full docs a few quick examples that illustrate
37       typical usage.
38
39   A simple example
40          # example script inlpp.pl
41          use PDL; # must be called before (!) 'use Inline Pdlpp' calls
42
43          use Inline Pdlpp; # the actual code is in the __Pdlpp__ block below
44
45          $x = sequence 10;
46          print $x->inc,"\n";
47          print $x->inc->dummy(1,10)->tcumul,"\n";
48
49          __DATA__
50
51          __Pdlpp__
52
53          pp_def('inc',
54                 Pars => 'i();[o] o()',
55                 Code => '$o() = $i() + 1;',
56                );
57
58          pp_def('tcumul',
59                 Pars => 'in(n);[o] mul()',
60                 Code => '$mul() = 1;
61                          loop(n) %{
62                            $mul() *= $in();
63                          %}',
64          );
65          # end example script
66
67       If you call this script it should generate output similar to this:
68
69          prompt> perl inlpp.pl
70          Inline running PDL::PP version 2.2...
71          [1 2 3 4 5 6 7 8 9 10]
72          [3628800 3628800 3628800 3628800 3628800 3628800 3628800 3628800 3628800 3628800]
73
74       Usage of "Inline::Pdlpp" in general is similar to "Inline::C".  In the
75       absence of full docs for "Inline::Pdlpp" you might want to compare
76       Inline::C.
77
78   Code that uses external libraries, etc
79       The script below is somewhat more complicated in that it uses code from
80       an external library (here from Numerical Recipes). All the relevant
81       information regarding include files, libraries and boot code is
82       specified in a config call to "Inline". For more experienced Perl
83       hackers it might be helpful to know that the format is similar to that
84       used with ExtUtils::MakeMaker. The keywords are largely equivalent to
85       those used with "Inline::C". Please see below for further details on
86       the usage of "INC", "LIBS", "AUTO_INCLUDE" and "BOOT".
87
88          use PDL; # this must be called before (!) 'use Inline Pdlpp' calls
89
90          use Inline Pdlpp => Config =>
91            INC => "-I$ENV{HOME}/include",
92            LIBS => "-L$ENV{HOME}/lib -lnr -lm",
93            # code to be included in the generated XS
94            AUTO_INCLUDE => <<'EOINC',
95          #include <math.h>
96          #include "nr.h"    /* for poidev */
97          #include "nrutil.h"  /* for err_handler */
98
99          static void nr_barf(char *err_txt)
100          {
101            fprintf(stderr,"Now calling croak...\n");
102            croak("NR runtime error: %s",err_txt);
103          }
104          EOINC
105          # install our error handler when loading the Inline::Pdlpp code
106          BOOT => 'set_nr_err_handler(nr_barf);';
107
108          use Inline Pdlpp; # the actual code is in the __Pdlpp__ block below
109
110          $x = zeroes(10) + 30;;
111          print $x->poidev(5),"\n";
112
113          __DATA__
114
115          __Pdlpp__
116
117          pp_def('poidev',
118                  Pars => 'xm(); [o] pd()',
119                  GenericTypes => [L,F,D],
120                  OtherPars => 'long idum',
121                  Code => '$pd() = poidev((float) $xm(), &$COMP(idum));',
122          );
123

Pdlpp Configuration Options

125       For information on how to specify Inline configuration options, see
126       Inline. This section describes each of the configuration options
127       available for Pdlpp. Most of the options correspond either to MakeMaker
128       or XS options of the same name. See ExtUtils::MakeMaker and perlxs.
129
130   AUTO_INCLUDE
131       Specifies extra statements to automatically included. They will be
132       added onto the defaults. A newline char will be automatically added.
133       Does essentially the same as a call to "pp_addhdr". For short bits of
134       code "AUTO_INCLUDE" is probably syntactically nicer.
135
136           use Inline Pdlpp => Config => AUTO_INCLUDE => '#include "yourheader.h"';
137
138   BLESS
139       Same as "pp_bless" command. Specifies the package (i.e. class) to which
140       your new pp_defed methods will be added. Defaults to "PDL" if omitted.
141
142           use Inline Pdlpp => Config => BLESS => 'PDL::Complex';
143
144   BOOT
145       Specifies C code to be executed in the XS BOOT section. Corresponds to
146       the XS parameter. Does the same as the "pp_add_boot" command. Often
147       used to execute code only once at load time of the module, e.g. a
148       library initialization call.
149
150   CC
151       Specify which compiler to use.
152
153   CCFLAGS
154       Specify extra compiler flags.
155
156   INC
157       Specifies an include path to use. Corresponds to the MakeMaker
158       parameter.
159
160           use Inline Pdlpp => Config => INC => '-I/inc/path';
161
162   LD
163       Specify which linker to use.
164
165   LDDLFLAGS
166       Specify which linker flags to use.
167
168       NOTE: These flags will completely override the existing flags, instead
169       of just adding to them. So if you need to use those too, you must
170       respecify them here.
171
172   LIBS
173       Specifies external libraries that should be linked into your code.
174       Corresponds to the MakeMaker parameter.
175
176           use Inline Pdlpp => Config => LIBS => '-lyourlib';
177
178       or
179
180           use Inline Pdlpp => Config => LIBS => '-L/your/path -lyourlib';
181
182   MAKE
183       Specify the name of the 'make' utility to use.
184
185   MYEXTLIB
186       Specifies a user compiled object that should be linked in. Corresponds
187       to the MakeMaker parameter.
188
189           use Inline Pdlpp => Config => MYEXTLIB => '/your/path/yourmodule.so';
190
191   OPTIMIZE
192       This controls the MakeMaker OPTIMIZE setting. By setting this value to
193       '-g', you can turn on debugging support for your Inline extensions.
194       This will allow you to be able to set breakpoints in your C code using
195       a debugger like gdb.
196
197   TYPEMAPS
198       Specifies extra typemap files to use. Corresponds to the MakeMaker
199       parameter.
200
201           use Inline Pdlpp => Config => TYPEMAPS => '/your/path/typemap';
202
203   NOISY
204       Show the output of any compilations going on behind the scenes. Turns
205       on "BUILD_NOISY" in Inline::C.
206

BUGS

208   "do"ing inline scripts
209       Beware that there is a problem when you use the __DATA__ keyword style
210       of Inline definition and want to "do" your script containing inlined
211       code. For example
212
213          # myscript.pl contains inlined code
214          # in the __DATA__ section
215          perl -e 'do "myscript.pl";'
216        One or more DATA sections were not processed by Inline.
217
218       According to Brian Ingerson (of Inline fame) the workaround is to
219       include an "Inline->init" call in your script, e.g.
220
221         use PDL;
222         use Inline Pdlpp;
223         Inline->init;
224
225         # perl code
226
227         __DATA__
228         __Pdlpp__
229
230         # pp code
231
232   "PDL::NiceSlice" and "Inline::Pdlpp"
233       There is currently an undesired interaction between PDL::NiceSlice and
234       "Inline::Pdlpp".  Since PP code generally contains expressions of the
235       type "$var()" (to access piddles, etc) PDL::NiceSlice recognizes those
236       incorrectly as slice expressions and does its substitutions. For the
237       moment (until hopefully the parser can deal with that) it is best to
238       explicitly switch PDL::NiceSlice off before the section of inlined
239       Pdlpp code. For example:
240
241         use PDL::NiceSlice;
242         use Inline::Pdlpp;
243
244         $x = sequence 10;
245         $x(0:3)++;
246         $x->inc;
247
248         no PDL::NiceSlice;
249
250         __DATA__
251
252         __C__
253
254         ppdef (...); # your full pp definition here
255

ACKNOWLEDGEMENTS

257       Brian Ingerson for creating the Inline infrastructure.
258

AUTHOR

260       Christian Soeller <soellermail@excite.com>
261

SEE ALSO

263       PDL
264
265       PDL::PP
266
267       Inline
268
269       Inline::C
270
272       Copyright (c) 2001. Christian Soeller. All rights reserved.
273
274       This program is free software; you can redistribute it and/or modify it
275       under the same terms as PDL itself.
276
277       See http://pdl.perl.org
278
279
280
281perl v5.30.2                      2020-04-02                      PP-INLINE(1)
Impressum