1GIT-SEND-EMAIL(1)                 Git Manual                 GIT-SEND-EMAIL(1)
2
3
4

NAME

6       git-send-email - Send a collection of patches as emails
7

SYNOPSIS

9       git send-email [<options>] <file|directory|rev-list options>...
10       git send-email --dump-aliases
11

DESCRIPTION

13       Takes the patches given on the command line and emails them out.
14       Patches can be specified as files, directories (which will send all
15       files in the directory), or directly as a revision list. In the last
16       case, any format accepted by git-format-patch(1) can be passed to git
17       send-email.
18
19       The header of the email is configurable via command-line options. If
20       not specified on the command line, the user will be prompted with a
21       ReadLine enabled interface to provide the necessary information.
22
23       There are two formats accepted for patch files:
24
25        1. mbox format files
26
27           This is what git-format-patch(1) generates. Most headers and MIME
28           formatting are ignored.
29
30        2. The original format used by Greg Kroah-Hartman’s
31           send_lots_of_email.pl script
32
33           This format expects the first line of the file to contain the "Cc:"
34           value and the "Subject:" of the message as the second line.
35

OPTIONS

37   Composing
38       --annotate
39           Review and edit each patch you’re about to send. Default is the
40           value of sendemail.annotate. See the CONFIGURATION section for
41           sendemail.multiEdit.
42
43       --bcc=<address>,...
44           Specify a "Bcc:" value for each email. Default is the value of
45           sendemail.bcc.
46
47           This option may be specified multiple times.
48
49       --cc=<address>,...
50           Specify a starting "Cc:" value for each email. Default is the value
51           of sendemail.cc.
52
53           This option may be specified multiple times.
54
55       --compose
56           Invoke a text editor (see GIT_EDITOR in git-var(1)) to edit an
57           introductory message for the patch series.
58
59           When --compose is used, git send-email will use the From, Subject,
60           and In-Reply-To headers specified in the message. If the body of
61           the message (what you type after the headers and a blank line) only
62           contains blank (or Git: prefixed) lines, the summary won’t be sent,
63           but From, Subject, and In-Reply-To headers will be used unless they
64           are removed.
65
66           Missing From or In-Reply-To headers will be prompted for.
67
68           See the CONFIGURATION section for sendemail.multiEdit.
69
70       --from=<address>
71           Specify the sender of the emails. If not specified on the command
72           line, the value of the sendemail.from configuration option is used.
73           If neither the command-line option nor sendemail.from are set, then
74           the user will be prompted for the value. The default for the prompt
75           will be the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if
76           that is not set, as returned by "git var -l".
77
78       --reply-to=<address>
79           Specify the address where replies from recipients should go to. Use
80           this if replies to messages should go to another address than what
81           is specified with the --from parameter.
82
83       --in-reply-to=<identifier>
84           Make the first mail (or all the mails with --no-thread) appear as a
85           reply to the given Message-Id, which avoids breaking threads to
86           provide a new patch series. The second and subsequent emails will
87           be sent as replies according to the --[no-]chain-reply-to setting.
88
89           So for example when --thread and --no-chain-reply-to are specified,
90           the second and subsequent patches will be replies to the first one
91           like in the illustration below where [PATCH v2 0/3] is in reply to
92           [PATCH 0/2]:
93
94               [PATCH 0/2] Here is what I did...
95                 [PATCH 1/2] Clean up and tests
96                 [PATCH 2/2] Implementation
97                 [PATCH v2 0/3] Here is a reroll
98                   [PATCH v2 1/3] Clean up
99                   [PATCH v2 2/3] New tests
100                   [PATCH v2 3/3] Implementation
101
102           Only necessary if --compose is also set. If --compose is not set,
103           this will be prompted for.
104
105       --subject=<string>
106           Specify the initial subject of the email thread. Only necessary if
107           --compose is also set. If --compose is not set, this will be
108           prompted for.
109
110       --to=<address>,...
111           Specify the primary recipient of the emails generated. Generally,
112           this will be the upstream maintainer of the project involved.
113           Default is the value of the sendemail.to configuration value; if
114           that is unspecified, and --to-cmd is not specified, this will be
115           prompted for.
116
117           This option may be specified multiple times.
118
119       --8bit-encoding=<encoding>
120           When encountering a non-ASCII message or subject that does not
121           declare its encoding, add headers/quoting to indicate it is encoded
122           in <encoding>. Default is the value of the
123           sendemail.assume8bitEncoding; if that is unspecified, this will be
124           prompted for if any non-ASCII files are encountered.
125
126           Note that no attempts whatsoever are made to validate the encoding.
127
128       --compose-encoding=<encoding>
129           Specify encoding of compose message. Default is the value of the
130           sendemail.composeencoding; if that is unspecified, UTF-8 is
131           assumed.
132
133       --transfer-encoding=(7bit|8bit|quoted-printable|base64|auto)
134           Specify the transfer encoding to be used to send the message over
135           SMTP. 7bit will fail upon encountering a non-ASCII message.
136           quoted-printable can be useful when the repository contains files
137           that contain carriage returns, but makes the raw patch email file
138           (as saved from a MUA) much harder to inspect manually. base64 is
139           even more fool proof, but also even more opaque. auto will use 8bit
140           when possible, and quoted-printable otherwise.
141
142           Default is the value of the sendemail.transferEncoding
143           configuration value; if that is unspecified, default to auto.
144
145       --xmailer, --no-xmailer
146           Add (or prevent adding) the "X-Mailer:" header. By default, the
147           header is added, but it can be turned off by setting the
148           sendemail.xmailer configuration variable to false.
149
150   Sending
151       --envelope-sender=<address>
152           Specify the envelope sender used to send the emails. This is useful
153           if your default address is not the address that is subscribed to a
154           list. In order to use the From address, set the value to "auto". If
155           you use the sendmail binary, you must have suitable privileges for
156           the -f parameter. Default is the value of the
157           sendemail.envelopeSender configuration variable; if that is
158           unspecified, choosing the envelope sender is left to your MTA.
159
160       --smtp-encryption=<encryption>
161           Specify the encryption to use, either ssl or tls. Any other value
162           reverts to plain SMTP. Default is the value of
163           sendemail.smtpEncryption.
164
165       --smtp-domain=<FQDN>
166           Specifies the Fully Qualified Domain Name (FQDN) used in the
167           HELO/EHLO command to the SMTP server. Some servers require the FQDN
168           to match your IP address. If not set, git send-email attempts to
169           determine your FQDN automatically. Default is the value of
170           sendemail.smtpDomain.
171
172       --smtp-auth=<mechanisms>
173           Whitespace-separated list of allowed SMTP-AUTH mechanisms. This
174           setting forces using only the listed mechanisms. Example:
175
176               $ git send-email --smtp-auth="PLAIN LOGIN GSSAPI" ...
177
178           If at least one of the specified mechanisms matches the ones
179           advertised by the SMTP server and if it is supported by the
180           utilized SASL library, the mechanism is used for authentication. If
181           neither sendemail.smtpAuth nor --smtp-auth is specified, all
182           mechanisms supported by the SASL library can be used. The special
183           value none maybe specified to completely disable authentication
184           independently of --smtp-user
185
186       --smtp-pass[=<password>]
187           Password for SMTP-AUTH. The argument is optional: If no argument is
188           specified, then the empty string is used as the password. Default
189           is the value of sendemail.smtpPass, however --smtp-pass always
190           overrides this value.
191
192           Furthermore, passwords need not be specified in configuration files
193           or on the command line. If a username has been specified (with
194           --smtp-user or a sendemail.smtpUser), but no password has been
195           specified (with --smtp-pass or sendemail.smtpPass), then a password
196           is obtained using git-credential.
197
198       --no-smtp-auth
199           Disable SMTP authentication. Short hand for --smtp-auth=none
200
201       --smtp-server=<host>
202           If set, specifies the outgoing SMTP server to use (e.g.
203           smtp.example.com or a raw IP address). Alternatively it can specify
204           a full pathname of a sendmail-like program instead; the program
205           must support the -i option. Default value can be specified by the
206           sendemail.smtpServer configuration option; the built-in default is
207           to search for sendmail in /usr/sbin, /usr/lib and $PATH if such
208           program is available, falling back to localhost otherwise.
209
210       --smtp-server-port=<port>
211           Specifies a port different from the default port (SMTP servers
212           typically listen to smtp port 25, but may also listen to submission
213           port 587, or the common SSL smtp port 465); symbolic port names
214           (e.g. "submission" instead of 587) are also accepted. The port can
215           also be set with the sendemail.smtpServerPort configuration
216           variable.
217
218       --smtp-server-option=<option>
219           If set, specifies the outgoing SMTP server option to use. Default
220           value can be specified by the sendemail.smtpServerOption
221           configuration option.
222
223           The --smtp-server-option option must be repeated for each option
224           you want to pass to the server. Likewise, different lines in the
225           configuration files must be used for each option.
226
227       --smtp-ssl
228           Legacy alias for --smtp-encryption ssl.
229
230       --smtp-ssl-cert-path
231           Path to a store of trusted CA certificates for SMTP SSL/TLS
232           certificate validation (either a directory that has been processed
233           by c_rehash, or a single file containing one or more PEM format
234           certificates concatenated together: see verify(1) -CAfile and
235           -CApath for more information on these). Set it to an empty string
236           to disable certificate verification. Defaults to the value of the
237           sendemail.smtpsslcertpath configuration variable, if set, or the
238           backing SSL library’s compiled-in default otherwise (which should
239           be the best choice on most platforms).
240
241       --smtp-user=<user>
242           Username for SMTP-AUTH. Default is the value of sendemail.smtpUser;
243           if a username is not specified (with --smtp-user or
244           sendemail.smtpUser), then authentication is not attempted.
245
246       --smtp-debug=0|1
247           Enable (1) or disable (0) debug output. If enabled, SMTP commands
248           and replies will be printed. Useful to debug TLS connection and
249           authentication problems.
250
251       --batch-size=<num>
252           Some email servers (e.g. smtp.163.com) limit the number emails to
253           be sent per session (connection) and this will lead to a failure
254           when sending many messages. With this option, send-email will
255           disconnect after sending $<num> messages and wait for a few seconds
256           (see --relogin-delay) and reconnect, to work around such a limit.
257           You may want to use some form of credential helper to avoid having
258           to retype your password every time this happens. Defaults to the
259           sendemail.smtpBatchSize configuration variable.
260
261       --relogin-delay=<int>
262           Waiting $<int> seconds before reconnecting to SMTP server. Used
263           together with --batch-size option. Defaults to the
264           sendemail.smtpReloginDelay configuration variable.
265
266   Automating
267       --no-[to|cc|bcc]
268           Clears any list of "To:", "Cc:", "Bcc:" addresses previously set
269           via config.
270
271       --no-identity
272           Clears the previously read value of sendemail.identity set via
273           config, if any.
274
275       --to-cmd=<command>
276           Specify a command to execute once per patch file which should
277           generate patch file specific "To:" entries. Output of this command
278           must be single email address per line. Default is the value of
279           sendemail.tocmd configuration value.
280
281       --cc-cmd=<command>
282           Specify a command to execute once per patch file which should
283           generate patch file specific "Cc:" entries. Output of this command
284           must be single email address per line. Default is the value of
285           sendemail.ccCmd configuration value.
286
287       --[no-]chain-reply-to
288           If this is set, each email will be sent as a reply to the previous
289           email sent. If disabled with "--no-chain-reply-to", all emails
290           after the first will be sent as replies to the first email sent.
291           When using this, it is recommended that the first file given be an
292           overview of the entire patch series. Disabled by default, but the
293           sendemail.chainReplyTo configuration variable can be used to enable
294           it.
295
296       --identity=<identity>
297           A configuration identity. When given, causes values in the
298           sendemail.<identity> subsection to take precedence over values in
299           the sendemail section. The default identity is the value of
300           sendemail.identity.
301
302       --[no-]signed-off-by-cc
303           If this is set, add emails found in Signed-off-by: or Cc: lines to
304           the cc list. Default is the value of sendemail.signedoffbycc
305           configuration value; if that is unspecified, default to
306           --signed-off-by-cc.
307
308       --[no-]cc-cover
309           If this is set, emails found in Cc: headers in the first patch of
310           the series (typically the cover letter) are added to the cc list
311           for each email set. Default is the value of sendemail.cccover
312           configuration value; if that is unspecified, default to
313           --no-cc-cover.
314
315       --[no-]to-cover
316           If this is set, emails found in To: headers in the first patch of
317           the series (typically the cover letter) are added to the to list
318           for each email set. Default is the value of sendemail.tocover
319           configuration value; if that is unspecified, default to
320           --no-to-cover.
321
322       --suppress-cc=<category>
323           Specify an additional category of recipients to suppress the
324           auto-cc of:
325
326           ·   author will avoid including the patch author.
327
328           ·   self will avoid including the sender.
329
330           ·   cc will avoid including anyone mentioned in Cc lines in the
331               patch header except for self (use self for that).
332
333           ·   bodycc will avoid including anyone mentioned in Cc lines in the
334               patch body (commit message) except for self (use self for
335               that).
336
337           ·   sob will avoid including anyone mentioned in Signed-off-by
338               lines except for self (use self for that).
339
340           ·   misc-by will avoid including anyone mentioned in Acked-by,
341               Reviewed-by, Tested-by and other "-by" lines in the patch body,
342               except Signed-off-by (use sob for that).
343
344           ·   cccmd will avoid running the --cc-cmd.
345
346           ·   body is equivalent to sob + bodycc + misc-by.
347
348           ·   all will suppress all auto cc values.
349
350           Default is the value of sendemail.suppresscc configuration value;
351           if that is unspecified, default to self if --suppress-from is
352           specified, as well as body if --no-signed-off-cc is specified.
353
354       --[no-]suppress-from
355           If this is set, do not add the From: address to the cc: list.
356           Default is the value of sendemail.suppressFrom configuration value;
357           if that is unspecified, default to --no-suppress-from.
358
359       --[no-]thread
360           If this is set, the In-Reply-To and References headers will be
361           added to each email sent. Whether each mail refers to the previous
362           email (deep threading per git format-patch wording) or to the first
363           email (shallow threading) is governed by "--[no-]chain-reply-to".
364
365           If disabled with "--no-thread", those headers will not be added
366           (unless specified with --in-reply-to). Default is the value of the
367           sendemail.thread configuration value; if that is unspecified,
368           default to --thread.
369
370           It is up to the user to ensure that no In-Reply-To header already
371           exists when git send-email is asked to add it (especially note that
372           git format-patch can be configured to do the threading itself).
373           Failure to do so may not produce the expected result in the
374           recipient’s MUA.
375
376   Administering
377       --confirm=<mode>
378           Confirm just before sending:
379
380           ·   always will always confirm before sending
381
382           ·   never will never confirm before sending
383
384           ·   cc will confirm before sending when send-email has
385               automatically added addresses from the patch to the Cc list
386
387           ·   compose will confirm before sending the first message when
388               using --compose.
389
390           ·   auto is equivalent to cc + compose
391
392           Default is the value of sendemail.confirm configuration value; if
393           that is unspecified, default to auto unless any of the suppress
394           options have been specified, in which case default to compose.
395
396       --dry-run
397           Do everything except actually send the emails.
398
399       --[no-]format-patch
400           When an argument may be understood either as a reference or as a
401           file name, choose to understand it as a format-patch argument
402           (--format-patch) or as a file name (--no-format-patch). By default,
403           when such a conflict occurs, git send-email will fail.
404
405       --quiet
406           Make git-send-email less verbose. One line per email should be all
407           that is output.
408
409       --[no-]validate
410           Perform sanity checks on patches. Currently, validation means the
411           following:
412
413           ·   Invoke the sendemail-validate hook if present (see
414               githooks(5)).
415
416           ·   Warn of patches that contain lines longer than 998 characters
417               unless a suitable transfer encoding (auto, base64, or
418               quoted-printable) is used; this is due to SMTP limits as
419               described by http://www.ietf.org/rfc/rfc5322.txt.
420
421           Default is the value of sendemail.validate; if this is not set,
422           default to --validate.
423
424       --force
425           Send emails even if safety checks would prevent it.
426
427   Information
428       --dump-aliases
429           Instead of the normal operation, dump the shorthand alias names
430           from the configured alias file(s), one per line in alphabetical
431           order. Note, this only includes the alias name and not its expanded
432           email addresses. See sendemail.aliasesfile for more information
433           about aliases.
434

CONFIGURATION

436       sendemail.aliasesFile
437           To avoid typing long email addresses, point this to one or more
438           email aliases files. You must also supply sendemail.aliasFileType.
439
440       sendemail.aliasFileType
441           Format of the file(s) specified in sendemail.aliasesFile. Must be
442           one of mutt, mailrc, pine, elm, or gnus, or sendmail.
443
444           What an alias file in each format looks like can be found in the
445           documentation of the email program of the same name. The
446           differences and limitations from the standard formats are described
447           below:
448
449           sendmail
450
451               ·   Quoted aliases and quoted addresses are not supported:
452                   lines that contain a " symbol are ignored.
453
454               ·   Redirection to a file (/path/name) or pipe (|command) is
455                   not supported.
456
457               ·   File inclusion (:include: /path/name) is not supported.
458
459               ·   Warnings are printed on the standard error output for any
460                   explicitly unsupported constructs, and any other lines that
461                   are not recognized by the parser.
462
463       sendemail.multiEdit
464           If true (default), a single editor instance will be spawned to edit
465           files you have to edit (patches when --annotate is used, and the
466           summary when --compose is used). If false, files will be edited one
467           after the other, spawning a new editor each time.
468
469       sendemail.confirm
470           Sets the default for whether to confirm before sending. Must be one
471           of always, never, cc, compose, or auto. See --confirm in the
472           previous section for the meaning of these values.
473

EXAMPLES

475   Use gmail as the smtp server
476       To use git send-email to send your patches through the GMail SMTP
477       server, edit ~/.gitconfig to specify your account settings:
478
479           [sendemail]
480                   smtpEncryption = tls
481                   smtpServer = smtp.gmail.com
482                   smtpUser = yourname@gmail.com
483                   smtpServerPort = 587
484
485       If you have multifactor authentication setup on your gmail account, you
486       will need to generate an app-specific password for use with git
487       send-email. Visit
488       https://security.google.com/settings/security/apppasswords to create
489       it.
490
491       Once your commits are ready to be sent to the mailing list, run the
492       following commands:
493
494           $ git format-patch --cover-letter -M origin/master -o outgoing/
495           $ edit outgoing/0000-*
496           $ git send-email outgoing/*
497
498       The first time you run it, you will be prompted for your credentials.
499       Enter the app-specific or your regular password as appropriate. If you
500       have credential helper configured (see git-credential(1)), the password
501       will be saved in the credential store so you won’t have to type it the
502       next time.
503
504       Note: the following core Perl modules that may be installed with your
505       distribution of Perl are required: MIME::Base64, MIME::QuotedPrint,
506       Net::Domain and Net::SMTP. These additional Perl modules are also
507       required: Authen::SASL and Mail::Address.
508

SEE ALSO

510       git-format-patch(1), git-imap-send(1), mbox(5)
511

GIT

513       Part of the git(1) suite
514
515
516
517Git 2.26.2                        2020-04-20                 GIT-SEND-EMAIL(1)
Impressum