1RADEAPCLIENT(1)                FreeRADIUS Daemon               RADEAPCLIENT(1)
2
3
4

NAME

6       radeapclient - send EAP packets to a RADIUS server, calculate responses
7

SYNOPSIS

9       radeapclient  [-4]  [-6] [-c count] [-d raddb_directory] [-f file] [-h]
10       [-i source_ip] [-q] [-s] [-r retries] [-S file] [-t timeout] [-v]  [-x]
11       server {acct|auth} secret
12

DESCRIPTION

14       radeapclient  is  a radius client program. It can send arbitrary radius
15       packets to a radius server, then shows the reply. Radeapclient  differs
16       from  radclient  in that if there is an EAP-MD5 challenge, then it will
17       be responded to.
18
19       radeapclient is otherwise identical to radclient.
20
21       The EAP-Identity attribute, if present is  used  to  construct  an  EAP
22       Identity message.
23
24       The EAP-MD5-Password attribute, if present is used to respond to an MD5
25       challenge.
26
27       No other EAP types are currently supported.
28
29

OPTIONS

31       -4     Use IPv4 (default)
32
33       -6     Use IPv6
34
35       -c count
36              Send each packet count times.
37
38       -d raddb
39              Set dictionary directory.
40
41       -f file
42              Read packets from file, not stdin.
43
44       -r retries
45              If timeout, retry sending the packet retries times.
46
47       -t timeout
48              Wait timeout seconds before retrying (may be  a  floating  point
49              number).
50
51       -h     Print usage help information.
52
53       -i id  Set request id to 'id'.  Values may be 0..255
54
55       -S file
56              Read secret from file, not command line.
57
58       -q     Quiet, do not print anything out.
59
60       -s     Print out summary information of auth results.
61
62       -v     Show program version information.
63
64       -x     Enable debugging mode.
65
66

EXAMPLE

68       A  sample  session that queries the remote server with an EAP-MD5 chal‐
69       lenge.
70
71              ( echo 'User-Name = "bob"';
72                echo 'EAP-MD5-Password = "hello"';
73                echo 'NAS-IP-Address = marajade.sandelman.ottawa.on.c';
74                echo 'EAP-Code = Response';
75                echo 'EAP-Id = 210';
76                echo 'EAP-Type-Identity = "bob";
77                echo 'Message-Authenticator = 0x00';
78                echo 'NAS-Port = 0' ) >req.txt
79
80              radeapclient -x localhost auth testing123 <req.txt
81
82
83

SEE ALSO

85       radclient(1)
86

AUTHOR

88       Michael Richardson, <mcr@sandelman.ottawa.on.ca>
89
90
91
92                               08 September 2003               RADEAPCLIENT(1)
Impressum