1SSL_WRITE(3)                        OpenSSL                       SSL_WRITE(3)
2
3
4

NAME

6       SSL_write_ex, SSL_write - write bytes to a TLS/SSL connection
7

SYNOPSIS

9        #include <openssl/ssl.h>
10
11        int SSL_write_ex(SSL *s, const void *buf, size_t num, size_t *written);
12        int SSL_write(SSL *ssl, const void *buf, int num);
13

DESCRIPTION

15       SSL_write_ex() and SSL_write() write num bytes from the buffer buf into
16       the specified ssl connection. On success SSL_write_ex() will store the
17       number of bytes written in *written.
18

NOTES

20       In the paragraphs below a "write function" is defined as one of either
21       SSL_write_ex(), or SSL_write().
22
23       If necessary, a write function will negotiate a TLS/SSL session, if not
24       already explicitly performed by SSL_connect(3) or SSL_accept(3). If the
25       peer requests a re-negotiation, it will be performed transparently
26       during the write function operation. The behaviour of the write
27       functions depends on the underlying BIO.
28
29       For the transparent negotiation to succeed, the ssl must have been
30       initialized to client or server mode. This is being done by calling
31       SSL_set_connect_state(3) or SSL_set_accept_state() before the first
32       call to a write function.
33
34       If the underlying BIO is blocking, the write functions will only
35       return, once the write operation has been finished or an error
36       occurred.
37
38       If the underlying BIO is non-blocking the write functions will also
39       return when the underlying BIO could not satisfy the needs of the
40       function to continue the operation. In this case a call to
41       SSL_get_error(3) with the return value of the write function will yield
42       SSL_ERROR_WANT_READ or SSL_ERROR_WANT_WRITE. As at any time a re-
43       negotiation is possible, a call to a write function can also cause read
44       operations! The calling process then must repeat the call after taking
45       appropriate action to satisfy the needs of the write function. The
46       action depends on the underlying BIO. When using a non-blocking socket,
47       nothing is to be done, but select() can be used to check for the
48       required condition. When using a buffering BIO, like a BIO pair, data
49       must be written into or retrieved out of the BIO before being able to
50       continue.
51
52       The write functions will only return with success when the complete
53       contents of buf of length num has been written. This default behaviour
54       can be changed with the SSL_MODE_ENABLE_PARTIAL_WRITE option of
55       SSL_CTX_set_mode(3). When this flag is set the write functions will
56       also return with success when a partial write has been successfully
57       completed. In this case the write function operation is considered
58       completed. The bytes are sent and a new write call with a new buffer
59       (with the already sent bytes removed) must be started. A partial write
60       is performed with the size of a message block, which is 16kB.
61

WARNINGS

63       When a write function call has to be repeated because SSL_get_error(3)
64       returned SSL_ERROR_WANT_READ or SSL_ERROR_WANT_WRITE, it must be
65       repeated with the same arguments.  The data that was passed might have
66       been partially processed.  When SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER was
67       set using SSL_CTX_set_mode(3) the pointer can be different, but the
68       data and length should still be the same.
69
70       You should not call SSL_write() with num=0, it will return an error.
71       SSL_write_ex() can be called with num=0, but will not send application
72       data to the peer.
73

RETURN VALUES

75       SSL_write_ex() will return 1 for success or 0 for failure. Success
76       means that all requested application data bytes have been written to
77       the SSL connection or, if SSL_MODE_ENABLE_PARTIAL_WRITE is in use, at
78       least 1 application data byte has been written to the SSL connection.
79       Failure means that not all the requested bytes have been written yet
80       (if SSL_MODE_ENABLE_PARTIAL_WRITE is not in use) or no bytes could be
81       written to the SSL connection (if SSL_MODE_ENABLE_PARTIAL_WRITE is in
82       use). Failures can be retryable (e.g. the network write buffer has
83       temporarily filled up) or non-retryable (e.g. a fatal network error).
84       In the event of a failure call SSL_get_error(3) to find out the reason
85       which indicates whether the call is retryable or not.
86
87       For SSL_write() the following return values can occur:
88
89       > 0 The write operation was successful, the return value is the number
90           of bytes actually written to the TLS/SSL connection.
91
92       <= 0
93           The write operation was not successful, because either the
94           connection was closed, an error occurred or action must be taken by
95           the calling process.  Call SSL_get_error() with the return value
96           ret to find out the reason.
97
98           Old documentation indicated a difference between 0 and -1, and that
99           -1 was retryable.  You should instead call SSL_get_error() to find
100           out if it's retryable.
101

SEE ALSO

103       SSL_get_error(3), SSL_read_ex(3), SSL_read(3) SSL_CTX_set_mode(3),
104       SSL_CTX_new(3), SSL_connect(3), SSL_accept(3) SSL_set_connect_state(3),
105       ssl(7), bio(7)
106

HISTORY

108       The SSL_write_ex() function was added in OpenSSL 1.1.1.
109
111       Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
112
113       Licensed under the OpenSSL license (the "License").  You may not use
114       this file except in compliance with the License.  You can obtain a copy
115       in the file LICENSE in the source distribution or at
116       <https://www.openssl.org/source/license.html>.
117
118
119
1201.1.1g                            2020-04-23                      SSL_WRITE(3)
Impressum