1bmon(8)                              bmon                              bmon(8)
2
3
4

NAME

6       bmon - bandwidth monitor and rate estimator
7

SYNOPSIS

9       bmon   [--show-all]   [--use-si]   [--input=MODULE]   [--output=MODULE]
10       [OPTIONS...]
11
12

DESCRIPTION

14       bmon is a monitoring and debugging tool to capture  networking  related
15       statistics  and  prepare them visually in a human friendly way. It fea‐
16       tures various output  methods  including  an  interactive  curses  user
17       interface and a programmable text output for scripting.
18
19

OPTIONS

21        -h, --help
22           Prints a short help text and exits.
23
24        -V, --version
25           Prints the versioning identifier and exits.
26
27        -i, --input=MODULE[:OPTIONS][,MODULE...]
28           Set  list of input modules to load and use. Multiple modules can be
29           used in parallel. bmon automatically loads  a  useful  and  working
30           input module by default. See INPUT MODULES for more details.
31
32        -o, --ouptutMODULE[:OPTIONS][,MODULE...]
33           Set list of output modules to load and use. Multiple modules can be
34           used in parallel. By default, bmon will use the curses output mode,
35           if  that  is  not  available due to an incompatible console it will
36           fall back to a simple  text  mode.  See  OUTPUT  MODULES  for  more
37           details.
38
39        -U, --use-si
40           Use  SI  unit  system  (1KB  =  1'000 bytes) instead of 1KB = 1'024
41           bytes.
42
43        -f, --configfile=FILE
44           Set alternative path to configuration file.
45
46        -p, --policy=POLICY
47           Set policy defining which network interfaces to display. See INTER‐
48           FACE SELECTION for more details.
49
50        -a, --show-all=
51           Display  all  interfaces,  even interface that are administratively
52           down.
53
54        -r, --read-interval=FLOAT
55           Set interval in seconds in which input modules read statistics from
56           their source. The default is 1.0 seconds.
57
58        -R, --rate-interval=FLOAT
59           Set  interval  in  seconds  in which the rate per counter is calcu‐
60           lated.  The default is 1.0 seconds.
61
62        -b, --use-bit
63           Show rates in bits per second instead of bytes per second.
64
65        -L, --lifetime=FLOAT
66           Set lifetime of an element in seconds before it is no  longer  dis‐
67           played without receiving any statistical updates. The default is 30
68           seconds.
69
70

INPUT MODULES

72       Input modules provide statistical data  about  elements.  Each  element
73       consists  of  attributes  which represents a counter, a rate, or a per‐
74       centage. Elements may carry additional child elements  to  represent  a
75       hierarchy.  Each  element  is  assigned to a group defined by the input
76       module. Input modules are polled in the  frequence  of  the  configured
77       read interval.
78
79       The following input modules are available:
80
81       netlink
82              Uses  the Netlink protocol to collect interface and traffic con‐
83              trol statistics from the kernel. This is the default input  mod‐
84              ule.
85
86
87       proc   Reads  interface statistics from the /proc/net/dev file. This is
88              considered a legacy interface and provided for backwards compat‐
89              ibily  reasons.  This is a fallback module if the Netlink inter‐
90              face is not available.
91
92
93       dummy  Programmable input module for debugging and testing purposes.
94
95
96       null   No data collected.
97
98
99       To receive additional information about a module, run the  module  with
100       the "help" option set like this:
101
102
103           bmon -i netlink:help
104
105       See MODULE CONFIGURATION for more details.
106
107

OUTPUT MODULES

109       Output  modules  display  or  export  the statistical data collected by
110       input modules. Multiple output modules can be run  at  the  same  time.
111       bmon  will  not prevent possible conflicts such as multiple output mod‐
112       ules writing to the console.
113
114       The following output modules exist:
115
116
117       curses Interactive curses based text user interface providing real time
118              rate   estimations   and  a  graphical  representatio  nof  each
119              attribute. Press '?'  to display the quick reference guide. This
120              is the default output mode.
121
122
123       ascii  Simple  programmable text output intended for human consumption.
124              Capable of printing list of interfaces,  detailed  counters  and
125              graphs  to the console. This is the default fallback output mode
126              if curses is not available.
127
128
129       format Fully scriptable output mode inteded for  consumption  by  other
130              programs.  See the module help text for additional information.
131
132
133       null   Disable output.
134
135
136       To  receive  additional information about a module, run the module with
137       the "help" option set like this:
138
139
140           bmon -o curses:help
141
142       See MODULE CONFIGURATION for more details.
143
144

MODULE CONFIGURATION

146       The syntax to configure modules is as follows:
147
148           ARGUMENT ::= mod1[:OPTS][,mod2[:OPTS]...]
149           OPTS     ::= OPTION[;OPTION...]
150           OPTION   ::= option[=value]
151
152
153       Run the module with option "help" to receive the list  of  options  for
154       each module:
155
156
157           bmon -i module:help
158
159

INTERFACE SELECTION

161       The following syntax is used to define the interface selection policy:
162
163           SELECTION ::= NAME[,NAME[,...]]
164           NAME      ::= [!]interface
165
166
167       The  interface  name  may contain the character '*' which will act as a
168       wildcard and represents any number of any character  type,  e.g.  eth*,
169       h*0, ...
170
171
172       Examples:
173
174
175           lo,eth0,eth1
176           eth*,!eth0
177
178

EXAMPLES

180       To run bmon in curses mode monitoring the interfaces eth0 and eth1:
181
182           bmon -p eth0,eth1 -o curses
183
184

FILES

186       /etc/bmon.conf
187       $HOME/.bmonrc
188
189

SEE ALSO

191       ip(8), netstat(8), ifconfig(8), netlink(7),
192
193

AUTHOR

195       Thomas Graf <tgraf@suug.ch> among others
196
197
198
199Bandwidth Monitor                                                      bmon(8)
Impressum