1RSPARMS(8)               Linux System Managers Manual               RSPARMS(8)
2
3
4

NAME

6       rsparms - Configure the Rose interface.
7

SYNOPSIS

9       rsparms -nodes add|del address[/mask] port neigh [digis...]
10
11       rsparms -nodes list
12
13       rsparms -call <callsign>|none
14
15       rsparms -version
16

DESCRIPTION

18       This  program is used to manipulate the routing tables of the Rose net‐
19       work layer. To set up a new route to a Rose node in the routing  tables
20       you  must use the nodes option. All of the parameters are needed to add
21       the node. It is probably best to illustrate with an example:
22
23            rsparms -nodes add 2080192303 144 F1OAT-11
24
25       This creates a new route to a distant node with the address  2080192303
26       and  the  packets  for that node should be sent on AX.25 port 144 to my
27       immediate neighbour F1OAT-11 without going  through  any  digi-praters.
28       For example to set up the same node but via a digi-peater I would use:
29
30            rsparms -nodes add 2080192303 144 F1OAT-11 F6PRA-9
31
32       It  is  also possible to remove a route to a distant node with the same
33       command except that the “add” is replaced by a “del”. The other parame‐
34       ters  must  also  be  present. If the node has no other routes then the
35       node will be deleted, and the neighbour node that  the  connections  go
36       via may also be deleted if no other node route uses it.
37
38       You may list the configured Rose routes using the following syntax:
39
40            rsparms -nodes list
41
42       This program may also be used to set up a common AX.25 level 2 callsign
43       that will be used for the ROSE node. By  default  no  special  level  2
44       callsign is set, but setting it will replace any existing level 2 call‐
45       sign and register another one. Setting  the  callsign  to  “none”  will
46       remove the level 2 callsign. For example:
47
48            rsparms -call VK2KTJ-10
49
50       would set the callsign used by Rose internode traffic to VK2KTJ-10.
51

OPTIONS

53       -version  Display the version information.
54

FILES

56       /etc/ax25/axports
57       /etc/ax25/rsports
58

SEE ALSO

60       call(1), rose(4), axports(5), rsports(5), rsparms(8).
61

AUTHOR

63       Jonathan Naylor G4KLX <g4klx@g4klx.demon.co.uk>
64
65
66
67Linux                            25 July 1997                       RSPARMS(8)
Impressum