1PMCLIENT(1)                 General Commands Manual                PMCLIENT(1)
2
3
4

NAME

6       pmclient, pmclient_fg - a simple performance metrics client
7

SYNOPSIS

9       pmclient  [-PVz?]   [-a archive] [-A align] [-h host] [-n pmnsfile] [-O
10       origin] [-s samples] [-S starttime]  [-t  interval]  [-T  endtime]  [-Z
11       timezone]
12
13       pmclient_fg ...
14

DESCRIPTION

16       pmclient  and  pmclient_fg  are simple clients that use the Performance
17       Metrics Application Programming Interface (PMAPI) to report some  high-
18       level system performance metrics.
19
20       The  real value of these tools is as sample clients using the PMAPI(3),
21       interfaces and to this end the source code is included with the Perfor‐
22       mance  Co-Pilot  (PCP)  package  (see  PCPIntro(1)),  and  is typically
23       installed in /usr/share/pcp/demos/pmclient.
24
25       The pmclient_fg program differs to pmclient in that it uses the  fetch‐
26       group API extension to the PMAPI, see pmFetchGroup(3).
27
28       Normally  pmclient operates on the distributed Performance Metrics Name
29       Space (PMNS), however if the -n  option  is  specified  an  alternative
30       local PMNS is loaded from the file pmnsfile.
31
32       Unless  directed  to another host by the -h option, or to an archive by
33       the -a option, pmclient will contact the Performance Metrics  Collector
34       Daemon  (PMCD)  on  the  local host to obtain the required information.
35       The argument to -a is a comma-separated list of names,  each  of  which
36       may  be the base name of an archive or the name of a directory contain‐
37       ing one or more archives.  The -a and -h options  are  mutually  exclu‐
38       sive.
39
40       By  default,  pmclient  reports  the time of day according to the local
41       timezone on the system where pmclient is run.  The  -Z  option  changes
42       the  timezone  to timezone in the format of the environment variable TZ
43       as described in environ(7).  The -z option changes the timezone to  the
44       local  timezone  at the host that is the source of the performance met‐
45       rics, as identified via either the -h or -a options.
46
47       The output from pmclient is directed to standard output, and lists
48
49       +  Aggregate CPU utilization, in the range 0 to 1.
50
51       +  If the system has more than 1 CPU, the ordinal number of the busiest
52          CPU, in the range 0 to ...
53
54       +  If  the  system  has  more  than  1 CPU, the CPU utilization for the
55          busiest CPU.
56
57       +  Real free memory in Mbytes.
58
59       +  Aggregate physical disk I/O operations per second (IOPS).
60
61       +  Load average over the last 1 minute and over the last 15 minutes.
62

OPTIONS

64       The available command line options are:
65
66       -a archive, --archive=archive
67            Performance metric values are retrieved from the  set  of  Perfor‐
68            mance  Co-Pilot  (PCP) archive log files identified by the archive
69            argument, which is a comma-separated list of names, each of  which
70            may be the base name of an archive or the name of a directory con‐
71            taining one or more archives.
72
73       -A align, --align=align
74            Force the initial sample to be aligned on the boundary of a  natu‐
75            ral time unit align.  Refer to PCPIntro(1) for a complete descrip‐
76            tion of the syntax for align.
77
78       -h host, --host=host
79            Fetch performance metrics from pmcd(1) on host, rather  than  from
80            the default localhost.
81
82       -n pmnsfile, --namespace=pmnsfile
83            Load  an alternative Performance Metrics Name Space (PMNS(5)) from
84            the file pmnsfile.
85
86       -O origin, --origin=origin
87            When reporting archived metrics, start reporting at origin  within
88            the  time window (see -S and -T).  Refer to PCPIntro(1) for a com‐
89            plete description of the syntax for origin.
90
91       -P, --pause
92            The default behavior for replaying a set of archives, is to replay
93            at  full  speed.   The -P option may be used in conjunction with a
94            set of archives, to request that the prevailing real-time delay be
95            applied between samples (see -t) to effect a pause.
96
97       -s samples, --samples=samples
98            The samples argument defines the number of samples to be retrieved
99            and reported.  If samples is 0 or -s is  not  specified,  pmclient
100            will  sample  and report continuously (in real time mode) or until
101            the end of the set of PCP archives (in archive mode).
102
103       -S starttime, --start=starttime
104            The -S option may be used in conjunction with a set of archives to
105            request  that display start at the starttime from the start of the
106            archive(s).  Refer to PCPIntro(1) for a  complete  description  of
107            the syntax for starttime.
108
109       -t interval, --interval=interval
110            Set  the  reporting interval to something other than the default 5
111            seconds.  The interval argument follows the  syntax  described  in
112            PCPIntro(1),  and  in the simplest form may be an unsigned integer
113            (the implied units in this case are seconds).
114
115       -T endtime, --finish=endtime
116            When reporting archived metrics, the report will be restricted  to
117            those  records  logged before or at endtime.  Refer to PCPIntro(1)
118            for a complete description of the syntax for endtime.
119
120       -V, --version
121            Display version number and exit.
122
123       -z, --hostzone
124            Use the local timezone of the host that is the source of the  per‐
125            formance  metrics,  as  identified  by  either  the  -h  or the -a
126            options.  The default is to use the timezone of the local host.
127
128       -Z timezone, --timezone=timezone
129            Use timezone for the date and time.  Timezone is in the format  of
130            the environment variable TZ as described in environ(7).
131
132       -?, --help
133            Display usage message and exit.
134

DIAGNOSTICS

136       All  are  generated  on  standard  error,  and are intended to be self-
137       explanatory.
138

FILES

140       $PCP_DEMOS_DIR/pmclient
141            source code, documentation, configuration files and Makefile  when
142            the PCP development package is installed
143

PCP ENVIRONMENT

145       Environment variables with the prefix PCP_ are used to parameterize the
146       file and directory names used by PCP.  On each installation,  the  file
147       /etc/pcp.conf  contains  the  local  values  for  these variables.  The
148       $PCP_CONF variable may be used to specify an alternative  configuration
149       file, as described in pcp.conf(5).
150
151       For environment variables affecting PCP tools, see pmGetOptions(3).
152

SEE ALSO

154       PCPIntro(1),    pmcd(1),    pmchart(1),   pmdumptext(1),   pmgenmap(1),
155       pminfo(1), pmrep(1), pmstat(1),  pmval(1),  PMAPI(3),  pmFetchGroup(3),
156       pcp.conf(5), pcp.env(5) and PMNS(5).
157
158
159
160Performance Co-Pilot                  PCP                          PMCLIENT(1)
Impressum