1PMDAGLUSTER(1)              General Commands Manual             PMDAGLUSTER(1)
2
3
4

NAME

6       pmdagluster - Gluster Filesystem PMDA
7

DESCRIPTION

9       pmdagluster  is a Performance Metrics Domain Agent (PMDA) which exports
10       metric values about mounted gluster filesystems  using  the  gluster(8)
11       command.  This PMDA exports metrics about volumes and bricks both local
12       and remote to the node where pmdagluster is running.
13
14       The gluster filesystem supports fine-grained control over enabling sta‐
15       tistics  on  individual  volumes,  so  that  the  values are optionally
16       enabled or disabled on systems where they are not desired to  be  moni‐
17       tored.
18
19       The  pmstore(1)  command can be used to enable and disable profiling of
20       volumes.  Using the individual instances of the  gluster.volume.profile
21       metric,  one  can set their values (and associated profiling) either on
22       (1) or off (0).  Additionally, pminfo(1) can report on the current sta‐
23       tus of profiling of each volume.
24
25            # pminfo ‐f gluster.volume.profile
26
27            gluster.volume.profile
28                inst [0 or "gv0"] value 0
29                inst [1 or "gv1"] value 1
30
31            # pmstore ‐i "gv0" gluster.volume.profile 1
32            gluster.volume.profile inst [0 or "gv0"] old value=0 new value=1
33
34       Further   details   on   the   gluster   filesystem  can  be  found  at
35       http://www.gluster.org.
36

INSTALLATION

38       Install the gluster PMDA by using the Install script as root:
39
40           # cd $PCP_PMDAS_DIR/gluster
41           # ./Install
42
43
44       To uninstall, do the following as root:
45
46           # cd $PCP_PMDAS_DIR/gluster
47           # ./Remove
48
49       pmdagluster is  launched  by  pmcd(1)  and  should  never  be  executed
50       directly.  The Install and Remove scripts notify pmcd(1) when the agent
51       is installed or removed.
52

FILES

54       $PCP_PMDAS_DIR/gluster/Install
55           installation script for the pmdagluster agent
56
57       $PCP_PMDAS_DIR/gluster/Remove
58           undo installation script for the pmdagluster agent
59
60       $PCP_LOG_DIR/pmcd/gluster.log
61           default log file for error messages from pmdagluster
62

PCP ENVIRONMENT

64       Environment variables with the prefix PCP_ are used to parameterize the
65       file  and  directory  names used by PCP. On each installation, the file
66       /etc/pcp.conf contains the  local  values  for  these  variables.   The
67       $PCP_CONF  variable may be used to specify an alternative configuration
68       file, as described in pcp.conf(5).
69

SEE ALSO

71       PCPIntro(1), pmcd(1), pminfo(1), pmstore(1) and gluster(8).
72
73
74
75Performance Co-Pilot                  PCP                       PMDAGLUSTER(1)
Impressum