1SRMCMD(1)                     Version 0.1.1~git1                     SRMCMD(1)
2
3
4

NAME

6       srmsync - download for SRM PowerControl
7
8

SYNOPSIS

10       srmsync [options] path
11
12

DESCRIPTION

14       srmsync  implements  the  serial protocols for SRM's PowerControl V, VI
15       and 7.  It allows you to download data from  the  PC  attached  to  the
16       serial device at path.
17
18       Data is stored in a srmwin compatible file store. If possible only data
19       not known to the srmwin file store is downloaded.
20
21

OPTIONS

23       Options available for the srmsync command:
24
25       -a, --all
26              Try to download data "deleted" on the PCV.  (PCVI and PC7  don't
27              seem to support getting "deleted" data).
28
29       -b, --baud=rate
30              Use specified baudrate, only. By default all supported baudrates
31              are probed. PCV factory setting  is  9600  baud.  PCVI  and  PV7
32              always use 38400.
33
34       -d, --dup
35              download/save data known to srmwin store, as well.
36
37       -f, --ftdi
38              use ftdi serial driver and open device by the given description.
39
40       -h, --help
41              A brief message.
42
43       -p, --pc=type
44              Type of PowerControl protocol to use. Supported are PowerControl
45              5, 6, and 7.  Default is "5".
46
47       -s, --split=seconds
48              Split data on gaps of specified minimum length. Time is given as
49              10*seconds (see --recint for srmcmd).
50
51       -S, --store=dir
52              Path  for  your  srmwin  file  store. That's where the _name.SRM
53              folders are in.
54
55       -v, --verbose
56              Enable verbose status messages.
57
58       -V, --version
59              show srmsync version number and exit.
60
61       -w, --write=destination
62              Write data retrieved from to specified wkt  file  before  splitā€
63              ting.
64
65

EXAMPLES

67        srmsync -S ~/srmwin /dev/ttyUSB0       # linux
68        srmsync -S ~/srmwin -p 7 /dev/ttyUSB0       # linux, PowerControl 7
69
70

SEE ALSO

72       This  is  just a very simplistic frontend for the lib. Please check the
73       source distribution for details.
74
75

BUGS

77       Yes. For sure. Just keep in mind, that protocol and  file  formats  are
78       reverse engineered...
79
80

AUTHORS

82       Rainer Clasen
83
84
85
86SRM access tool                   9 Mar 2011                         SRMCMD(1)
Impressum