1mgettydefs(4)                mgetty_sendfax manual               mgettydefs(4)
2
3
4

NAME

6       mgettydefs - speed and terminal settings used by mgetty
7

DESCRIPTION

9       The  /etc/gettydefs  file contains information used by mgetty(1) to set
10       up the speed and terminal settings for a line.  It also supplies infor‐
11       mation on what the login prompt should look like.
12
13       Many  versions  of  UNIX  have  a  version  of getty(1) that also reads
14       /etc/gettydefs.  Both  mgetty  and  getty  expect  similar  formats  in
15       /etc/gettydefs except that, when used by mgetty, extended functionality
16       is available.  Even so, the additional functions are simply ignored  by
17       standard  getty,  so they can co-exist using the same file.  Note, how‐
18       ever, that mgetty  can  be  compiled  to  use  a  file  different  from
19       /etc/gettydefs  if  your  getty  gets upset about the extensions.  This
20       manual page documents /etc/gettydefs and describes the  extended  func‐
21       tionality  available  when used by mgetty(1).  This document will refer
22       to getty(1) except where mgetty's behaviour is different.
23
24       Each entry in /etc/gettydefs has the following format:
25
26              label# initial-flags # final-flags # login-prompt #next-label
27
28       Each entry is followed by a blank line.  The  login  prompt  field  can
29       contain quoted characters which will be converted to other values.  The
30       sequences and their substitutions are:
31
32       \n             newline
33
34       \r             carriage return
35
36       \g             beep
37
38       \b             backspace
39
40       \v             vertical tab (VT)
41
42       \f             formfeed
43
44       \t             tab
45
46       \L             portname
47
48       \C             time in ctime(3) format.
49
50       \N             number of users currently logged in
51
52       \U             number of users currently logged in
53
54       \D             date in DD/MM format
55
56       \T             time in hh:mm:ss format
57
58       \I             modem CONNECT attributes
59
60       \sequence      where "sequence" is a  valid  strtol  format,  such  as:
61                      \0nnn (octal), \0xnnn (hex), or \nnn (decimal).
62
63       Note that standard getty usually only supports \b, \r and \n.
64
65       The various fields are:
66
67       label          This  is  the  string against which getty tries to match
68                      its second argument.  It is often  the  speed,  such  as
69                      1200,  at  which the terminal is supposed to run, but it
70                      need not be (see below).
71
72       initial-flags  These flags are the initial ioctl(2) settings  to  which
73                      the  terminal  is  to  be  set if a terminal type is not
74                      specified to getty.  The flags  that  getty  understands
75                      are  the  ones  listed in termio(7)).  mgetty is usually
76                      compiled for termios(7) and often has  a  more  complete
77                      set than getty.
78
79       Normally only the speed flag is required in the
80                      initial-flags.  getty automatically sets the terminal to
81                      raw input mode and takes care of the  other  flags.   If
82                      the "-s" option is used with mgetty(1) the speed setting
83                      is ignored.  The initial-flag settings remain in  effect
84                      until getty executes login(1).
85
86       final-flags    These  flags  take  the same values as the initial-flags
87                      and are set just before getty executes login.  The speed
88                      flag  is  again  required,  except with mgetty if the -s
89                      flag was supplied.  Two other commonly specified  final-
90                      flags are TAB3, so that tabs are sent to the terminal as
91                      spaces, and HUPCL, so that the line is hung  up  on  the
92                      final close.
93
94       login-prompt   This  entire  field  is  printed  as  the  login-prompt.
95                      Unlike the above fields where white space (a space,  tab
96                      or new-line) is ignored, they are included in the login-
97                      prompt field.  This field is ignored if the "-p"  option
98                      has been specified to mgetty(1).
99
100       next-label     specifies  the  label  to  use  if the user user types a
101                      <break> character, or getty detects a  reception  error.
102                      Getty  searches  for  the  entry  with next-label as its
103                      label field and set up the terminal for those  settings.
104                      Usually,  a series of speeds are linked together in this
105                      fashion, into a closed set; for instance, 2400 linked to
106                      1200,  which  in turn is linked to 300, which finally is
107                      linked to 2400.  next-label is ignored with mgetty(1).
108
109       Several additional composite settings are available  for  initial-flags
110       and final-flags.  The following composite flags are supported by mgetty
111       and are usually supported by getty:
112
113       SANE                equivalent  to  ``stty  sane''.   (BRKINT,  IGNPAR,
114                           ISTRIP,  ICRNL,  IXON,  OPOST,  CS8,  CREAD,  ISIG,
115                           ICANON, ECHO, ECHOK)
116
117       ODDP                Odd parity (CS7, PARENB, PARODD)
118
119       PARITY,EVENP        even parity (CS7, PARENB)
120
121       -ODDP,-PARITY,-EVENP
122                           no parity (resets PARENB, PARODD, and sets CS8)
123
124       RAW                 raw I/O (no canonical processing) (turns off OPOST,
125                           ICANON)
126
127       -RAW,COOKED         enable   canonical   processing  (turns  on  OPOST,
128                           ICANON)
129
130       NL                  Ignore newlines.  (ICRNL, ONLCR)
131
132       -NL                 Respect newlines (turns INLCR, IGNCR, ICRNL, ONLCR,
133                           OCRNL, ONLRET off)
134
135       LCASE               Ignore  case  -  treat  all  as lowercase.  (IUCLC,
136                           OLCUC, XCASE) Is set if mgetty  believes  login  is
137                           entirely uppercase.
138
139       -LCASE              Respect case (turns off IUCLC, OLCUC and XCASE)
140
141       TABS                output tabs as tabs
142
143       -TABS,TAB3          output tabs as spaces
144
145       EK                  Sets VERASE to "#" and VKILL to CKILL respectively.
146                           (note that while many gettys default VERASE to "#".
147                           mgetty defaults VERASE to backspace.)
148
149       Additionally, mgetty (but not getty) can set any of the control charac‐
150       ters listed in the c_cc termio(termios) structure by  the  use  of  two
151       tokens:
152
153       <character name> <value>
154
155       Eg:
156
157       VERASE ^h
158
159       The  value can be set as ``^<character>'', ``\nnn'' or ``\<character>''
160       (normal UNIX \ escapes).
161
162       See the termio(7) or termios(7) manual pages to a list of  which  ``V''
163       variables  can  be  changed.  Note that many of these can be changed in
164       the c_cc array, but won't have any effect.
165
166       If getty is called without  a  second  argument,  the  first  entry  of
167       /etc/gettydefs  is  used  by  getty,  thus  making  the  first entry of
168       /etc/gettydefs the default entry.  It is also used if getty cannot find
169       the specified label.  Mgetty use a default label of ``n'', but this can
170       be changed in the configuration.  If /etc/gettydefs itself is  missing,
171       there is one entry built into the command which brings up a terminal at
172       300 (configuration parameter in mgetty) baud.
173
174       It is strongly recommended that after making or  modifying  /etc/getty‐
175       defs,  it  be  run through getty with the check option to be sure there
176       are no errors.
177

EXAMPLES

179       The following two lines show an example of 300/1200 baud toggle,  which
180       is useful for dial-up ports:
181
182              1200# B1200 HUPCL # B1200 SANE IXANY TAB3 #login: #300
183              300# B300 HUPCL # B300 SANE IXANY TAB3 #login: #1200
184
185       The  following  line  shows  a typical 9600 baud entry for a hard-wired
186       connection (not currently supported for mgetty):
187
188              9600# B9600 # B9600 SANE IXANY IXANY ECHOE TAB3 #login: #9600
189
190       The following line is a typical smart-modem setup, suitable for mgetty:
191
192              19200mg#
193                  B19200 #
194                  B19200 SANE VERASE \b VINTR \003 HUPCL #
195                  \n\D \T \N Users @!login: #19200mg
196

FILES

198       /etc/gettydefs
199

SEE ALSO

201       mgetty(8), getty(8), login(1), ioctl(2), termio(7), termios(7).
202
203
204
205greenie                            4 Dec 93                      mgettydefs(4)
Impressum