1FLUXBOX-KEYS(5)                 Fluxbox Manual                 FLUXBOX-KEYS(5)
2
3
4

NAME

6       fluxbox-keys - keyboard shortcuts configuration for fluxbox(1)
7

SYNOPSIS

9       ~/.fluxbox/keys
10

SYNTAX

12       Variable parameters are shown in emphasis: argument
13
14       Optional parameters are shown in square brackets: [argument]
15
16       All other characters shown are required verbatim. Whitespace is
17       required where shown, but it is fine to add more whitespace.
18

DESCRIPTION

20       The keys file defines the keyboard shortcuts for fluxbox(1).
21
22       You can customize fluxbox’s key handling through the ~/.fluxbox/keys
23       file. The file consists of lines of the basic format:
24
25       [modifiers] key :'command' [arguments ...]
26
27       The space between the key and the : before the command is mandatory.
28
29       All modifiers and commands are case-insensitive. Some command arguments
30       (especially those that will be passed to the shell) are case-sensitive.
31       Some key names are case-sensitive.
32
33       Lines beginning with a # or ! are considered comments and are unread by
34       fluxbox.
35
36       You will need to “reload” fluxbox after editing the keys file so it
37       picks up your change.
38

MODIFIERS

40       You can get a list of possible modifiers by calling ‘xmodmap -pm’. This
41       also shows you to which keys the modifiers are mapped, but the
42       following modifiers are most commonly used:
43
44       Shift Control Mod1 Mod4
45
46       where Mod1 is the Alt key on the PC keyboard and Mod4 is usually a key
47       branded with a familiar company logo.
48
49       There are also some special modifiers that refer to mouse button events
50
51           OnDesktop
52               The mouse cursor is over the desktop (root window), and not any
53               window.
54
55           OnToolbar
56               The mouse cursor is over the toolbar (which is normally at the
57               bottom of the screen).
58
59           OnWindow
60               The mouse cursor is over a window.
61
62           OnTitlebar
63               The mouse cursor is over a window’s titlebar.
64
65           OnTab
66               The mouse cursor is over a tab.
67
68           Double
69               Limits this action to double-clicks only.
70
71   Combining Modifiers
72       To combine two or more modifiers, just list them (space-delimited) in
73       any order.
74

KEYS

76       You may specify a key by its key name (for example, a or space) or by
77       its numeric keycode (for example, 38 or 0xf3).
78
79       If you don’t know the name of a key, you can run xev(1) in a terminal,
80       push the key, and see the name in the output. If you have some
81       "special" keys that do not produce a key name in the output of xev(1),
82       you can just use the keycode (NOT the keysym!) in your keys file.
83
84       Commands can also be bound to mouse events (N denotes the number of the
85       button, eg. 1 is the primary button, 4/5 are the wheel buttons):
86
87       MouseN
88           The mouse button N is pressed down and held.
89
90       ClickN
91           The mouse button N is clicked (pressed and released with no
92           movement in between)
93
94       MoveN
95           The mouse button N is currently held, the bound action is triggered
96           as often as the mouse moves.
97
98       There are some special "keys" that let you bind events to non-keyboard
99       events:
100
101       ChangeWorkspace
102           Fires when the workspace changes. This can be used to change
103           backgrounds or do anything else you like when you switch to a new
104           workspace. See the EXAMPLES below for one idea.
105
106           Warning
107           Use caution with this event! For example, do NOT bind this to any
108           action that changes your current workspace. If you break your
109           fluxbox with this feature, you get to keep the pieces.
110

CHAINING

112       Key bindings can be chained in a fashion similar to Emacs key bindings
113       using the syntax:
114
115       modifiers-1 key-1 modifiers-2 key-2 :'command' [arguments ...]*
116
117       To abort a chained command part-way through typing it, press the <ESC>
118       key.
119
120       To Bind CTRL+C CTRL+X (Which means, press CTRL+C then CTRL+X) to quit
121       fluxbox.
122
123           Control c Control x :Quit
124
125

KEYMODES

127       A specific set of key mappings can be activated and de-activated
128       on-the-fly using what are called keymodes. The syntax to define a
129       mapping in a keymode is:
130
131       keymode: modifiers key :'command' [arguments ...]
132
133       Where keymode is any alpha-numeric string name.
134
135       When this keymode is activated (see the KeyMode command below), all
136       bindings prefaced by that keymode name become active (and all other
137       keybindings will be deactivated) until the keymode changes again.
138

COMMANDS

140       Some commands have multiple names which are shown below as
141           CMD1 | CMD2
142
143       Related commands have been grouped below as
144           CMD1 / CMD2
145
146       The commands are broken up into sections as follows
147
148           ·   Mouse Commands
149
150           ·   Window Commands
151
152           ·   Workspace Commands
153
154           ·   Menu Commands
155
156           ·   Window Manager Commands
157
158           ·   Special Commands
159
160   Mouse Commands
161       These commands may only be bound to mouse buttons (plus modifiers), not
162       keystrokes. In all cases, the action finishes when the mouse button is
163       released.
164
165       StartMoving
166           Start dragging to move the window.
167
168       StartResizing [corner]
169           Start dragging to resize the window as if you had grabbed the
170           window at the specified corner.
171
172           By default corner is BottomRight, but may be overridden with one
173           of:
174               NearestCorner NearestEdge NearestCornerOrEdge Center TopLeft
175               Top TopRight Left Right BottomLeft Bottom BottomRight
176
177           If NearestCornerOrEdge is specified the size of the corner can also
178           be specified to be the larger of one or two following numbers:
179           [pixel-size [percent-size]] or percent-size%, where percent-size is
180           the percentage of half the window width or height. If no size is
181           given, it defaults to 50 pixels and 30%.
182
183       StartTabbing
184           Start dragging to add this window to another’s tabgroup.
185
186       ActivateTab
187           Activates the tab underneath the mouse.
188
189   Window Commands
190       These commands ordinarily affect only the currently focused window. The
191       OnWindow modifier and ForEach command may affect the window that is
192       used.
193
194       Minimize | MinimizeWindow | Iconify
195           Minimize the current window, equivalent to the window button.
196
197       Maximize | MaximizeWindow
198           Maximize the current window, equivalent to the window button.
199
200       MaximizeHorizontal / MaximizeVertical
201           Maximize the current window in one direction only, leaving the
202           other dimension unchanged.
203
204       Fullscreen
205           Resize the window’s content to fit the whole screen, without any
206           window decoration.
207
208       Raise / Lower
209           Reorder this window to the top or bottom of the window stack,
210           within its current layer. See fluxbox(1) for a discussion of
211           layers.
212
213       RaiseLayer / LowerLayer [offset]
214           Raise the window up to the layer above, or lower it to the layer
215           below. See fluxbox(1) for a discussion of layers.
216
217       SetLayer layer
218           Move the window to the specified layer.  layer should be one of
219           AboveDock, Dock, Top, Normal, Bottom, Desktop. See fluxbox(1) for a
220           discussion of layers.
221
222       Close
223           Close the current window, equivalent to the window button.
224
225       Kill | KillWindow
226           Close a window that’s not responding to Close, like using xkill(1).
227
228       Shade | ShadeWindow
229           Toggle the shaded state of the current window, equivalent to the
230           window button. A shaded window appears as only the title bar.
231
232       ShadeOn / ShadeOff
233           Set the shaded state of the window to On / Off.
234
235       Stick | StickWindow
236           Toggle the sticky state of the current window, equivalent to the
237           window button. A sticky window is visible on all workspaces.
238
239       SetDecor decor
240           Sets which window decorations will be shown.  decor has the same
241           format as the ‘[Deco]’ parameter in the apps file. See
242           fluxbox-apps(5) for more info.
243
244       ToggleDecor
245           Toggles the presence of the window decorations (title bar, window
246           buttons, and resize bar).
247
248       NextTab / PrevTab
249           Cycle to the next / previous tab in the current tab group.
250
251       Tab number
252           Cycle to the given tab in the current tab group, where 1 is the
253           first tab. A negative number counts from the end of the tab group
254           (-1 is the last tab, -2 is the next-to-last, etc.).
255
256       MoveTabRight / MoveTabLeft
257           Reorder the tabs in the current tab group, swapping the current tab
258           with the one to the right / left.
259
260       DetachClient
261           Remove the current tab from the tab group, placing it in its own
262           window.
263
264       ResizeTo width[%] height[%]
265           Resizes the window to the given width and height. If the value is
266           given in percent, then the window size will be based on the current
267           screen’s size.
268
269       Resize delta-width[%] delta-height[%]
270           Resizes the window relative to the current width and height. If the
271           value is given in percent, then the window size will be based on
272           the current window’s size.
273
274       ResizeHorizontal delta-width[%] / ResizeVertical delta-height[%]
275           Resizes the window in one dimension only. If the value is given in
276           percent, then the window size will be based on the current window’s
277           size.
278
279       MoveTo x[%] y[%] [anchor]
280           Moves the window to the given coordinates, given in pixels or
281           relatively to the current screen size if % is specified after the
282           value.
283
284           If either x or y is set to \*, that coordinate will be ignored, and
285           the movement will only take place in one dimension.
286
287           The default anchor is the upper left corner, but this may be
288           overridden with one of:
289               TopLeft Left BottomLeft Top Center Bottom TopRight Right
290               BottomRight
291
292       Move delta-x delta-y
293           Moves the window relative to its current position. Positive numbers
294           refer to right and down, and negative to left and up, respectively.
295
296       MoveRight d / MoveLeft d / MoveUp d / MoveDown d
297           Moves the window relative to its current position by the number of
298           pixels specified in d. If the number is negative, it moves in the
299           opposite direction.
300
301       TakeToWorkspace workspace / SendToWorkspace workspace
302           Sends you along with the current window to the selected workspace.
303           SendToWorkspace just sends the window. The first workspace is
304           number 1, not 0.
305
306       TakeToNextWorkspace [offset] / TakeToPrevWorkspace [offset]
307           Sends you along with the current window to the next or previous
308           workspace. If you set offset to a value greater than the default of
309           1, it will move you that number of workspaces ahead or behind. If
310           you go beyond the end of the currently defined workspaces, it will
311           wrap around to the other end automatically.
312
313       SendToNextWorkspace [offset] / SendToPrevWorkspace [offset]
314           Identical to the "TakeTo..." commands, but again this sends only
315           the window, and does not move you away from your current workspace.
316
317       SetAlpha [alpha [unfocused-alpha]]
318           Sets the alpha value of a window.
319
320           Putting a + or - in front of the value adds or subtracts from the
321           current value. A plain integer sets the value explicitly.
322
323           no arguments
324               Resets both focused and unfocused settings to default opacity.
325
326           one argument
327               Changes both focused and unfocused alpha settings.
328
329           two arguments
330               First value becomes the focused alpha, second becomes the
331               unfocused alpha value.
332
333       SetHead number
334           Moves the window to the given display head. Only available when
335           fluxbox has been compiled with Xinerama support.
336
337       SendToNextHead [offset] / SendToPrevHead [offset]
338           Sends the current window to the next/previous display head. If you
339           specify an offset greater than 1, it will move the window that many
340           heads. If this takes the window beyond the total number of heads,
341           it will wrap around to the beginning.
342
343       SetXProp PROP=value
344           Sets the xproperty PROP of the current window to value. Delete the
345           content of PROP by using PROP=.
346
347   Workspace Commands
348       These commands affect the entire workspace (or "desktop" as it is
349       sometimes called).
350
351       AddWorkspace / RemoveLastWorkspace
352           Adds or removes a workspace from the end of the list of workspaces.
353
354       NextWorkspace [n] / PrevWorkspace [n] / RightWorkspace [n] /
355       LeftWorkspace [n]
356           Switch to the Next / Previous workspace. All versions accept an
357           offset value n, which defaults to 1 and refers to the number of
358           workspaces to move at one time. {Next,Prev}Workspace wrap around
359           when going past the last workspace, whereas {Right,Left}Workspace
360           do not.
361
362       Workspace number
363           Jumps to the given workspace number. The first workspace is 1.
364
365       NextWindow [{options}] [pattern] / PrevWindow [{options}] [pattern]
366           Focuses the next / previous window in the focus list.
367
368           options is one or more of the following, space delimited:
369
370               static
371                   Instead of moving in order of most-recent focus, move in
372                   order of when the window was opened (or, the order shown in
373                   the iconbar).
374
375               groups
376                   Only include the current tab in windows with multiple tabs.
377
378               If pattern arguments are supplied, only windows that match all
379               the patterns are considered - all others are skipped. See the
380               section CLIENT PATTERNS below for more information.
381
382               This pair of commands has a special side-effect when the
383               keybinding used has a modifier - It will temporarily raise the
384               cycled window to the front so you can see it, but if you
385               continue holding down the modifier and press the key again (For
386               example, keep holding "Alt" while you tap the "Tab" key a few
387               times), fluxbox will lower the window again when you move on to
388               the next one. This allows you to preview the windows in order,
389               but does not change the order in doing so.
390
391       NextGroup [{options}] [pattern] / PrevGroup [{options}] [pattern]
392           Equivalent to NextWindow / PrevWindow above, but with the groups
393           option forced on.
394
395       GotoWindow number [{options}] [pattern]
396           Focuses and activates the window at position number in the focus
397           list. The options and pattern arguments have the same meaning as
398           NextWindow above.
399
400       Activate [pattern] | Focus [pattern]
401           With pattern, this is an alias for GoToWindow 1 pattern. Without,
402           this behaves like a window command, so that OnWindow events can
403           change the focused window.
404
405       Attach pattern
406           Combines all windows that match the pattern into a single tab
407           group. See CLIENT PATTERNS for more about the pattern arguments.
408
409       FocusLeft / FocusRight / FocusUp / FocusDown
410           Focus to the next window which is located in the direction
411           specified.
412
413       ArrangeWindows pattern / ArrangeWindowsVertical pattern /
414       ArrangeWindowsHorizontal pattern
415           Tries to arrange all windows on the current workspace so that they
416           overlap the least amount possible.  ArrangeWindowsVertical prefers
417           vertical splits (windows side by side), whereas
418           ArrangeWindowsHorizontal prefers horizontal splits (windows on top
419           of eachother). See CLIENT PATTERNS for more about the pattern
420           arguments.
421
422       ArrangeWindowsStackLeft pattern / ArrangeWindowsStackRight pattern
423           Similar to ArrangeWindows, these commands arrange windows on the
424           current workspace. The currently focussed window is used as the
425           main window, and will fill half the screen, while the other windows
426           are tiled on the other half of the screen as if they were tiled
427           with ArrangeWindows.  ArrangeWindowsStackLeft puts the main window
428           on the RIGHT hand side of the screen, and the tiled windows are on
429           the LEFT hand side of the screen.  ArrangeWindowsStackRight puts
430           the main window on the LEFT hand side of the screen, and the tiled
431           windows are on the RIGHT hand side of the screen.
432
433       ArrangeWindowsStackTop pattern / ArrangeWindowsStackBottom pattern
434           Behaves just like ArrangeWindowsStackLeft and
435           ArrangeWindowsStackRight.  ArrangeWindowsStackBottom places the
436           main window on the TOP half of the screen, and the tiled windows on
437           the bottom half of the screen.  ArrangeWindowsStackTop places the
438           main window on the BOTTOM half of the screen and the tiled windows
439           on the top half of the screen.
440
441       ShowDesktop
442           Minimizes all windows on the current workspace. If they are already
443           all minimized, then it restores them.
444
445       Deiconify mode destination
446           Deiconifies windows (or, restores from a minimized state).
447
448           Where mode may be one of:
449
450               All
451                   All icons across all workspaces.
452
453               AllWorkspace
454                   All icons on the current workspace.
455
456               Last
457                   The last icon across all workspaces.
458
459               LastWorkspace (default)
460                   The last icon on the current workspace.
461
462           And destination may be one of:
463
464               Current (default)
465                   Deiconify to the current workspace.
466
467               OriginQuiet
468                   Deiconify to the window’s original workspace, but does so
469                   in the background, without moving you there.
470
471       SetWorkspaceName name / SetWorkspaceNameDialog
472           Sets the name of the current workspace.
473
474       CloseAllWindows
475           Closes all windows on all desktops.
476
477   Menu Commands
478       These commands open or close fluxbox popup menus. For more information
479       on what these menus contain or how to configure them, see fluxbox(1).
480
481       RootMenu
482           Opens the root menu. See ROOT MENU in fluxbox-menu(5) for details.
483
484       WorkspaceMenu
485           Opens a menu showing all workspaces and windows. See Workspace Menu
486           in fluxbox(1) for details.
487
488       WindowMenu
489           Opens a menu containing actions for the current window. See WINDOW
490           MENU in fluxbox-menu(5) for details.
491
492           ClientMenu [pattern]
493               Opens a menu that contains all windows. If you specify a
494               pattern, only matching windows will be in the menu. Selecting a
495               window will jump to that workspace and raise the window. See
496               CLIENT PATTERNS below for more details on the pattern argument.
497
498           CustomMenu path
499               Opens a custom menu file. This path must be a valid menu file
500               in the same format as detailed by the ROOT MENU section of
501               fluxbox-menu(5).
502
503           HideMenus
504               Hide all fluxbox popup menus.
505
506   Window Manager Commands
507       These commands affect the Window Manager, or more than one window.
508
509       Restart [path]
510           Restarts fluxbox. This does not close any running applications. If
511           the optional path is a path to an executable window manager, that
512           manager is started in place of fluxbox.
513
514       Quit | Exit
515           Exits fluxbox. This will normally cause X to stop as well and
516           terminate all existing applications, returning you to the login
517           manager or console.
518
519       Reconfig | Reconfigure
520           Reloads all fluxbox configuration files including the keys file,
521           apps file, and init file, if they have changed.
522
523       SetStyle path
524           Sets the current style to that given in path, which must be the
525           full path to a fluxbox style.
526
527       ReloadStyle
528           Reloads only the current style. Useful after editing a style which
529           is currently in use.
530
531       ExecCommand args ... | Exec args ... | Execute args ...
532           Probably the most-used binding of all. Passes all the arguments to
533           your $SHELL (or /bin/sh if $SHELL is not set). You can use this to
534           launch applications, run shell scripts, etc. Since all arguments
535           are passed verbatim to the shell, you can use environment
536           variables, pipes, or anything else the shell can do. Note that
537           processes only see environment variables that were set before
538           fluxbox started (such as in ~/.fluxbox/startup), or any that are
539           set via the Export or SetEnv commands, below. See fluxbox(1) for
540           more details on the ENVIRONMENT and \~/.fluxbox/startup file.
541
542       CommandDialog
543           Pops up a dialog box that lets you type in any of these commands
544           manually.
545
546       SetEnv name value | Export name=value
547           Sets an environment variable in Fluxbox. It will be passed to any
548           applications spawned by any future ExecCommand commands.
549
550       SetResourceValue resourcename resourcevalue | SetResourceValueDialog
551           Sets a fluxbox resource value, which are normally stored in the
552           init file. See fluxbox(1) for more details on available resources
553           and allowed values.
554
555   Special Commands
556       These commands have special meanings or behaviors.
557
558       MacroCmd {command1} {command2} {command3} ...
559           Allows you to execute more than one command with one keybinding.
560           The commands will be executed in series. The {} brackets are
561           literally required, as in the following example:
562
563               MacroCmd {MoveTo 0 0} {ResizeTo 1280 800}
564
565       Delay {command} [microseconds]
566           Delays running command for the given amount of time. If the same
567           key binding is activated again, the timer will be restarted.
568
569       ToggleCmd {command1} {command2} ...
570           Alternates between the commands. On the first press of the bound
571           key, runs command1. On the next press, runs command2.
572
573       BindKey keybinding
574           Adds the given keybinding (which must be a valid key binding as
575           defined in the DESCRIPTION section above) to your keys file.
576
577       KeyMode keymode [return-keybinding]
578           Activates the named keymode (or, all key binding lines prefaced
579           with the same keymode:) and deactivates all others until the
580           return-keybinding (by default Escape) is pressed. The default
581           keymode is named default.
582
583       ForEach {command} [{condition}] | Map {command} [{condition}]
584           Runs the given command (normally one from the Window Commands
585           section above) on each window. If you specify a condition (See
586           Conditions, below) the action will be limited to matching windows.
587
588       If {condition} {then-command} [{else-command}] | Cond {condition}
589       {then-command} [{else-command}]
590           If the condition command returns true, then run the then-command,
591           otherwise run the optional else-command. See Conditions below for
592           more information on the condition argument.
593
594   Conditions
595       These special commands are used to match windows conditionally. They
596       are commonly used by the If and ForEach command.
597
598       Matches pattern
599           Returns true if the current window matches the given pattern. See
600           CLIENT PATTERNS below for details on the pattern syntax.
601
602           If your key binding uses the OnWindow modifier, it matches against
603           the window you clicked, not the currently focused window.
604
605           To check other windows besides the currently focused one, see the
606           Every and Some conditions below.
607
608       Some condition
609           Returns true if any window on any workspace (not just the currently
610           focused one) matches the condition.
611
612       Every condition
613           Returns true if every window on every workspace (not just the
614           current one) matches the condition.
615
616       Not condition
617           Returns true if condition returns false, and vice-versa.
618
619       And {condition1} {condition2} [{condition3} ...]
620           Returns true if and only if all given conditions return true.
621
622       Or {condition1} {condition2} [{condition3} ...]
623           Returns true if any of the listed conditions return true.
624
625       Xor {condition1} {condition2} [{condition3} ...]
626           Returns the boolean xor of the truth values for all conditions
627           listed.
628

CLIENT PATTERNS

630       Many of the more advanced commands take a pattern argument, which
631       allows you to direct the action at a specific window or set of windows
632       which match the properties specified in the pattern.
633
634       A pattern looks like this
635           ([propertyname[!]=]regexp) ...
636
637       Match definitions are enclosed in parentheses (...), and if no
638       propertyname is given then Name is assumed. The regexp can contain any
639       regular expression, or the special value [current], which matches the
640       corresponding value of the currently focused window. See regex(7) for
641       more information on acceptable regular expressions.
642
643       propertyname is not case sensitive, whereas the regexp is.
644
645       If you specify multiple (pattern) arguments, this implies an AND
646       condition - All specified patterns must match.
647
648       You can use = to test for equality or != to test for inequality.
649
650       The following values are accepted for propertyname
651
652           Name
653               A string, corresponding to the CLASSNAME property (The first
654               field of WM_CLASS from the output of the xprop(1) utility).
655
656           Class
657               A string, corresponding to the CLASSCLASS property (The second
658               field of WM_CLASS from the output of the xprop(1) utility).
659
660           Title
661               A string, corresponding to the window title (WM_NAME from
662               xprop(1)).
663
664           Role
665               A string, corresponding to the ROLE property (WM_WINDOW_ROLE
666               from xprop(1)).
667
668           Transient
669               Either yes or no, depending on whether the window is transient
670               (typically, a popup dialog) or not.
671
672           Maximized
673               Either yes or no, depending on whether the window is maximized
674               or not.
675
676           MaximizedHorizontal
677               Either yes or no, depending on whether the window is maximized
678               horizontally or not.
679
680           MaximizedVertical
681               Either yes or no, depending on whether the window is maximized
682               vertically or not.
683
684           Minimized
685               Either yes or no, depending on whether the window is minimized
686               (iconified) or not.
687
688           Fullscreen
689               Either yes or no, depending on whether the window is fullscreen
690               or not.
691
692           Shaded
693               Either yes or no, depending on whether the window is shaded or
694               not.
695
696           Stuck
697               Either yes or no, depending on whether the window is sticky (on
698               all workspaces) or not.
699
700           FocusHidden
701               Either yes or no, depending on whether the window has asked to
702               be left off the focus list (or, the alt-tab list), or not.
703
704           IconHidden
705               Either yes or no, depending on whether the window has asked to
706               be left off the icon list (or, the taskbar), or not.
707
708           Urgent
709               Either yes or no, depending on whether the window has the
710               urgent hint set.
711
712           Workspace
713               A number corresponding to the workspace number to which the
714               window is attached. The first workspace here is 0. You may also
715               use [current] to match the currently visible workspace.
716
717           WorkspaceName
718               A string corresponding to the name of the workspace to which
719               the window is attached.
720
721           Head
722               The number of the display head to which the window is attached.
723               You may match this against the special value [mouse] which
724               refers to the head where the mouse pointer currently resides.
725
726           Layer
727               The string name of the window’s layer, which is one of
728               AboveDock, Dock, Top, Normal, Bottom, Desktop
729
730           Screen
731               The number of the currently used screen. If the setup of the
732               running xserver involves independent screens (not Xinerama),
733               the $DISPLAY environment contains something like :0.1 or :1.0.
734               The part after the dot (.) is the number of the screen.
735
736           @XPROP
737               A string, corresponding to any xproperty (Use either the
738               xprop(1) utility or the SetXProp command to set a xproperty to
739               a window)
740
741       Matches any windows with the CLASSNAME of "xterm".
742
743           (xterm)
744
745       Matches any windows with the same CLASSNAME as the currently focused
746       window.
747
748           (Name=[current])
749
750       Matches any windows on the same head as the mouse but on a different
751       layer than the currently focused window.
752
753           (Head=[mouse]) (Layer!=[current])
754
755       Matches any windows having a xproperty named FOO with "bar" in it.
756
757           (@FOO=.*bar.*)
758
759

FILES

761       ~/.fluxbox/keys
762           This is the default location for the keybinding definitions.
763
764       /usr/X11R6/include/X11/keysymdef.h
765           X key names are in this file.
766
767       /usr/X11R6/lib/X11/XKeysymDB
768           X key names are also in this file.
769

RESOURCES

771       session.keyFile: location
772           This may be set to override the location of the keybinding
773           definitions.
774

ENVIRONMENT

776       Remember that ExecCommand command can take advantage of other
777       environment variables if they are set before fluxbox is started, or via
778       the Export or SetEnv commands. For example, if $TERM is set, it could
779       be use like this:
780
781           Mod1 x :ExecCommand $TERM
782
783       For more information about environment variables, see your shell’s
784       manual.
785

EXAMPLES

787       Here are some interesting and/or useful examples you can do with your
788       keys file.
789
790           # Mod4+drag moves a window
791           OnWindow Mod4 Mouse1 :StartMoving
792
793           # If any xterm windows are open, cycle through them. If none are open, open
794           # one:
795           Mod4 t :If {Some Matches (xterm)} {NextWindow (xterm)} {Exec xterm}
796
797           # Set a different wallpaper on every workspace:
798           ChangeWorkspace :Exec fbsetbg ~/.fluxbox/bg$(xprop -root _NET_CURRENT_DESKTOP | awk '{print $3}').png
799
800           # Focusses the next window with it's xproperty 'PROP' set to 'foo'
801           Mod4 p Mod4 Tab :NextWindow (@PROP=foo)
802

AUTHORS

804       ·   Jim Ramsay <i.am at jimramsay com> (>fluxbox-1.0.0)
805
806       ·   Curt Micol <asenchi at asenchi com> (>fluxbox-0.9.11)
807
808       ·   Tobias Klausmann <klausman at users sourceforge net>
809           (⟨fluxbox-0.9.11)
810
811       ·   Grubert <grubert at users sourceforge net> (fluxbox)
812
813       ·   Matthew Hawkins <matt at mh dropbear id au> (blackbox)
814
815       ·   Wilbert Berendsen <wbsoft at xs4all nl> (blackbox)
816

SEE ALSO

818       fluxbox(1) xprop(1) xev(1) xkill(1) regex(7)
819

AUTHOR

821       Jim Ramsay <i.am@jimramsay.com>
822           Author.
823
824
825
826fluxbox-keys.txt               08 February 2015                FLUXBOX-KEYS(5)
Impressum