1CONFIG(7) CONFIG(7)
2
6 config - More than you probably want to know about npm configuration
7 Description
9 npm gets its configuration values from the following sources, sorted by
10 priority:
11 Command Line Flags
13 Putting --foo bar on the command line sets the foo configuration param‐
14 eter to "bar". A -- argument tells the cli parser to stop reading
15 flags. Using --flag without specifying any value will set the value to
16 true.
17 Example: --flag1 --flag2 will set both configuration parameters to
19 true, while --flag1 --flag2 bar will set flag1 to true, and flag2 to
20 bar. Finally, --flag1 --flag2 -- bar will set both configuration
21 parameters to true, and the bar is taken as a command argument.
22 Environment Variables
24 Any environment variables that start with npm_config_ will be inter‐
25 preted as a configuration parameter. For example, putting npm_con‐
26 fig_foo=bar in your environment will set the foo configuration parame‐
27 ter to bar. Any environment configurations that are not given a value
28 will be given the value of true. Config values are case-insensitive,
29 so NPM_CONFIG_FOO=bar will work the same. However, please note that
30 inside npm help scripts npm will set its own environment variables and
31 Node will prefer those lowercase versions over any uppercase ones that
32 you might set. For details see this issue
33 https://github.com/npm/npm/issues/14528.
34 Notice that you need to use underscores instead of dashes, so
36 --allow-same-version would become npm_config_allow_same_version=true.
37 npmrc Files
39 The four relevant files are:
40 · per-project configuration file (/path/to/my/project/.npmrc)
42 · per-user configuration file (defaults to $HOME/.npmrc; configurable
44 via CLI option --userconfig or environment variable $NPM_CONFIG_USER‐
45 CONFIG)
46 · global configuration file (defaults to $PREFIX/etc/npmrc; config‐
48 urable via CLI option --globalconfig or environment variable
49 $NPM_CONFIG_GLOBALCONFIG)
50 · npm's built-in configuration file (/path/to/npm/npmrc)
52 See npm help npmrc for more details.
55 Default Configs
57 Run npm config ls -l to see a set of configuration parameters that are
58 internal to npm, and are defaults if nothing else is specified.
59 Shorthands and Other CLI Niceties
61 The following shorthands are parsed on the command-line:
62 · -v: --version
64 · -h, -?, --help, -H: --usage
66 · -s, --silent: --loglevel silent
68 · -q, --quiet: --loglevel warn
70 · -d: --loglevel info
72 · -dd, --verbose: --loglevel verbose
74 · -ddd: --loglevel silly
76 · -g: --global
78 · -C: --prefix
80 · -l: --long
82 · -m: --message
84 · -p, --porcelain: --parseable
86 · -reg: --registry
88 · -f: --force
90 · -desc: --description
92 · -S: --save
94 · -P: --save-prod
96 · -D: --save-dev
98 · -O: --save-optional
100 · -B: --save-bundle
102 · -E: --save-exact
104 · -y: --yes
106 · -n: --yes false
108 · ll and la commands: ls --long
110 If the specified configuration param resolves unambiguously to a known
113 configuration parameter, then it is expanded to that configuration
114 parameter. For example:
115 npm ls --par
117 # same as:
118 npm ls --parseable
119 If multiple single-character shorthands are strung together, and the
121 resulting combination is unambiguously not some other configuration
122 param, then it is expanded to its various component pieces. For exam‐
123 ple:
124 npm ls -gpld
126 # same as:
127 npm ls --global --parseable --long --loglevel info
128 Per-Package Config Settings
130 When running scripts (see npm help scripts) the package.json "config"
131 keys are overwritten in the environment if there is a config param of
132 <name>[@<version>]:<key>. For example, if the package.json has this:
133 { "name" : "foo"
135 , "config" : { "port" : "8080" }
136 , "scripts" : { "start" : "node server.js" } }
137 and the server.js is this:
139 http.createServer(...).listen(process.env.npm_package_config_port)
141 then the user could change the behavior by doing:
143 npm config set foo:port 80
145 See npm help package.json for more information.
147 Config Settings
149 access
150 · Default: restricted
151 · Type: Access
153 When publishing scoped packages, the access level defaults to
156 restricted. If you want your scoped package to be publicly viewable
157 (and installable) set --access=public. The only valid values for access
158 are public and restricted. Unscoped packages always have an access
159 level of public.
160 allow-same-version
162 · Default: false
163 · Type: Boolean
165 Prevents throwing an error when npm version is used to set the new ver‐
168 sion to the same value as the current version.
169 always-auth
171 · Default: false
172 · Type: Boolean
174 Force npm to always require authentication when accessing the registry,
177 even for GET requests.
178 also
180 · Default: null
181 · Type: String
183 When "dev" or "development" and running local npm shrinkwrap, npm out‐
186 dated, or npm update, is an alias for --dev.
187 audit
189 · Default: true
190 · Type: Boolean
192 When "true" submit audit reports alongside npm install runs to the
195 default registry and all registries configured for scopes. See the
196 documentation for npm help audit for details on what is submitted.
197 audit-level
199 · Default: "low"
200 · Type: 'low', 'moderate', 'high', 'critical'
202 The minimum level of vulnerability for npm audit to exit with a
205 non-zero exit code.
206 auth-type
208 · Default: 'legacy'
209 · Type: 'legacy', 'sso', 'saml', 'oauth'
211 What authentication strategy to use with adduser/login.
214 before
216 · Alias: enjoy-by
217 · Default: null
219 · Type: Date
221 If passed to npm install, will rebuild the npm tree such that only ver‐
224 sions that were available on or before the --before time get installed.
225 If there's no versions available for the current set of direct depen‐
226 dencies, the command will error.
227 If the requested version is a dist-tag and the given tag does not pass
229 the --before filter, the most recent version less than or equal to that
230 tag will be used. For example, foo@latest might install foo@1.2 even
231 though latest is 2.0.
232 bin-links
234 · Default: true
235 · Type: Boolean
237 Tells npm to create symlinks (or .cmd shims on Windows) for package
240 executables.
241 Set to false to have it not do this. This can be used to work around
243 the fact that some file systems don't support symlinks, even on osten‐
244 sibly Unix systems.
245 browser
247 · Default: OS X: "open", Windows: "start", Others: "xdg-open"
248 · Type: String
250 The browser that is called by the npm docs command to open websites.
253 ca
255 · Default: The npm CA certificate
256 · Type: String, Array or null
258 The Certificate Authority signing certificate that is trusted for SSL
261 connections to the registry. Values should be in PEM format (Windows
262 calls it "Base-64 encoded X.509 (.CER)") with newlines replaced by the
263 string "\n". For example:
264 ca="-----BEGIN CERTIFICATE-----\nXXXX\nXXXX\n-----END CERTIFICATE-----"
266 Set to null to only allow "known" registrars, or to a specific CA cert
268 to trust only that specific signing authority.
269 Multiple CAs can be trusted by specifying an array of certificates:
271 ca[]="..."
273 ca[]="..."
274 See also the strict-ssl config.
276 cafile
278 · Default: null
279 · Type: path
281 A path to a file containing one or multiple Certificate Authority sign‐
284 ing certificates. Similar to the ca setting, but allows for multiple
285 CA's, as well as for the CA information to be stored in a file on disk.
286 cache
288 · Default: Windows: %AppData%\npm-cache, Posix: ~/.npm
289 · Type: path
291 The location of npm's cache directory. See npm help cache
294 cache-lock-stale
296 · Default: 60000 (1 minute)
297 · Type: Number
299 The number of ms before cache folder lockfiles are considered stale.
302 cache-lock-retries
304 · Default: 10
305 · Type: Number
307 Number of times to retry to acquire a lock on cache folder lockfiles.
310 cache-lock-wait
312 · Default: 10000 (10 seconds)
313 · Type: Number
315 Number of ms to wait for cache lock files to expire.
318 cache-max
320 · Default: Infinity
321 · Type: Number
323 DEPRECATED: This option has been deprecated in favor of --pre‐
326 fer-online.
327 --cache-max=0 is an alias for --prefer-online.
329 cache-min
331 · Default: 10
332 · Type: Number
334 DEPRECATED: This option has been deprecated in favor of --prefer-off‐
337 line.
338 --cache-min=9999 (or bigger) is an alias for --prefer-offline.
340 cert
342 · Default: null
343 · Type: String
345 A client certificate to pass when accessing the registry. Values
348 should be in PEM format (Windows calls it "Base-64 encoded X.509
349 (.CER)") with newlines replaced by the string "\n". For example:
350 cert="-----BEGIN CERTIFICATE-----\nXXXX\nXXXX\n-----END CERTIFICATE-----"
352 It is not the path to a certificate file (and there is no "certfile"
354 option).
355 cidr
357 · Default: null
358 · Type: String, Array, null
360 This is a list of CIDR address to be used when configuring limited
363 access tokens with the npm token create command.
364 color
366 · Default: true
367 · Type: Boolean or "always"
369 If false, never shows colors. If "always" then always shows colors.
372 If true, then only prints color codes for tty file descriptors.
373 This option can also be changed using the environment: colors are dis‐
375 abled when the environment variable NO_COLOR is set to any value.
376 depth
378 · Default: Infinity
379 · Type: Number
381 The depth to go when recursing directories for npm ls, npm cache ls,
384 and npm outdated.
385 For npm outdated, a setting of Infinity will be treated as 0 since that
387 gives more useful information. To show the outdated status of all
388 packages and dependents, use a large integer value, e.g., npm outdated
389 --depth 9999
390 description
392 · Default: true
393 · Type: Boolean
395 Show the description in npm search
398 dev
400 · Default: false
401 · Type: Boolean
403 Install dev-dependencies along with packages.
406 dry-run
408 · Default: false
409 · Type: Boolean
411 Indicates that you don't want npm to make any changes and that it
414 should only report what it would have done. This can be passed into
415 any of the commands that modify your local installation, eg, install,
416 update, dedupe, uninstall. This is NOT currently honored by some net‐
417 work related commands, eg dist-tags, owner, etc.
418 editor
420 · Default: EDITOR environment variable if set, or "vi" on Posix, or
421 "notepad" on Windows.
422 · Type: path
424 The command to run for npm edit or npm config edit.
427 engine-strict
429 · Default: false
430 · Type: Boolean
432 If set to true, then npm will stubbornly refuse to install (or even
435 consider installing) any package that claims to not be compatible with
436 the current Node.js version.
437 force
439 · Default: false
440 · Type: Boolean
442 Makes various commands more forceful.
445 · lifecycle script failure does not block progress.
447 · publishing clobbers previously published versions.
449 · skips cache when requesting from the registry.
451 · prevents checks against clobbering non-npm files.
453 format-package-lock
456 · Default: true
457 · Type: Boolean
459 Format package-lock.json or npm-shrinkwrap.json as a human readable
462 file.
463 fetch-retries
465 · Default: 2
466 · Type: Number
468 The "retries" config for the retry module to use when fetching packages
471 from the registry.
472 fetch-retry-factor
474 · Default: 10
475 · Type: Number
477 The "factor" config for the retry module to use when fetching packages.
480 fetch-retry-mintimeout
482 · Default: 10000 (10 seconds)
483 · Type: Number
485 The "minTimeout" config for the retry module to use when fetching pack‐
488 ages.
489 fetch-retry-maxtimeout
491 · Default: 60000 (1 minute)
492 · Type: Number
494 The "maxTimeout" config for the retry module to use when fetching pack‐
497 ages.
498 fund
500 · Default: true
501 · Type: Boolean
503 When "true" displays the message at the end of each npm install
506 acknowledging the number of dependencies looking for funding. See npm
507 help fund for details.
508 git
510 · Default: "git"
511 · Type: String
513 The command to use for git commands. If git is installed on the com‐
516 puter, but is not in the PATH, then set this to the full path to the
517 git binary.
518 git-tag-version
520 · Default: true
521 · Type: Boolean
523 Tag the commit when using the npm version command.
526 commit-hooks
528 · Default: true
529 · Type: Boolean
531 Run git commit hooks when using the npm version command.
534 global
536 · Default: false
537 · Type: Boolean
539 Operates in "global" mode, so that packages are installed into the pre‐
542 fix folder instead of the current working directory. See npm help
543 folders for more on the differences in behavior.
544 · packages are installed into the {prefix}/lib/node_modules folder,
546 instead of the current working directory.
547 · bin files are linked to {prefix}/bin
549 · man pages are linked to {prefix}/share/man
551 globalconfig
554 · Default: {prefix}/etc/npmrc
555 · Type: path
557 The config file to read for global config options.
560 global-style
562 · Default: false
563 · Type: Boolean
565 Causes npm to install the package into your local node_modules folder
568 with the same layout it uses with the global node_modules folder. Only
569 your direct dependencies will show in node_modules and everything they
570 depend on will be flattened in their node_modules folders. This obvi‐
571 ously will eliminate some deduping. If used with legacy-bundling,
572 legacy-bundling will be preferred.
573 group
575 · Default: GID of the current process
576 · Type: String or Number
578 The group to use when running package scripts in global mode as the
581 root user.
582 heading
584 · Default: "npm"
585 · Type: String
587 The string that starts all the debugging log output.
590 https-proxy
592 · Default: null
593 · Type: url
595 A proxy to use for outgoing https requests. If the HTTPS_PROXY or
598 https_proxy or HTTP_PROXY or http_proxy environment variables are set,
599 proxy settings will be honored by the underlying request library.
600 if-present
602 · Default: false
603 · Type: Boolean
605 If true, npm will not exit with an error code when run-script is
608 invoked for a script that isn't defined in the scripts section of pack‐
609 age.json. This option can be used when it's desirable to optionally run
610 a script when it's present and fail if the script fails. This is use‐
611 ful, for example, when running scripts that may only apply for some
612 builds in an otherwise generic CI setup.
613 ignore-prepublish
615 · Default: false
616 · Type: Boolean
618 If true, npm will not run prepublish scripts.
621 ignore-scripts
623 · Default: false
624 · Type: Boolean
626 If true, npm does not run scripts specified in package.json files.
629 init-module
631 · Default: ~/.npm-init.js
632 · Type: path
634 A module that will be loaded by the npm init command. See the documen‐
637 tation for the init-package-json https://github.com/isaacs/init-pack‐
638 age-json module for more information, or npm help init.
639 init-author-name
641 · Default: ""
642 · Type: String
644 The value npm init should use by default for the package author's name.
647 init-author-email
649 · Default: ""
650 · Type: String
652 The value npm init should use by default for the package author's
655 email.
656 init-author-url
658 · Default: ""
659 · Type: String
661 The value npm init should use by default for the package author's home‐
664 page.
665 init-license
667 · Default: "ISC"
668 · Type: String
670 The value npm init should use by default for the package license.
673 init-version
675 · Default: "1.0.0"
676 · Type: semver
678 The value that npm init should use by default for the package version
681 number, if not already set in package.json.
682 json
684 · Default: false
685 · Type: Boolean
687 Whether or not to output JSON data, rather than the normal output.
690 This feature is currently experimental, and the output data structures
692 for many commands is either not implemented in JSON yet, or subject to
693 change. Only the output from npm ls --json and npm search --json are
694 currently valid.
695 key
697 · Default: null
698 · Type: String
700 A client key to pass when accessing the registry. Values should be in
703 PEM format with newlines replaced by the string "\n". For example:
704 key="-----BEGIN PRIVATE KEY-----\nXXXX\nXXXX\n-----END PRIVATE KEY-----"
706 It is not the path to a key file (and there is no "keyfile" option).
708 legacy-bundling
710 · Default: false
711 · Type: Boolean
713 Causes npm to install the package such that versions of npm prior to
716 1.4, such as the one included with node 0.8, can install the package.
717 This eliminates all automatic deduping. If used with global-style this
718 option will be preferred.
719 link
721 · Default: false
722 · Type: Boolean
724 If true, then local installs will link if there is a suitable globally
727 installed package.
728 Note that this means that local installs can cause things to be
730 installed into the global space at the same time. The link is only
731 done if one of the two conditions are met:
732 · The package is not already installed globally, or
734 · the globally installed version is identical to the version that is
736 being installed locally.
737 local-address
740 · Default: undefined
741 · Type: IP Address
743 The IP address of the local interface to use when making connections to
746 the npm registry. Must be IPv4 in versions of Node prior to 0.12.
747 loglevel
749 · Default: "notice"
750 · Type: String
752 · Values: "silent", "error", "warn", "notice", "http", "timing",
754 "info", "verbose", "silly"
755 What level of logs to report. On failure, all logs are written to
758 npm-debug.log in the current working directory.
759 Any logs of a higher level than the setting are shown. The default is
761 "notice".
762 logstream
764 · Default: process.stderr
765 · Type: Stream
767 This is the stream that is passed to the npmlog
770 https://github.com/npm/npmlog module at run time.
771 It cannot be set from the command line, but if you are using npm pro‐
773 grammatically, you may wish to send logs to somewhere other than
774 stderr.
775 If the color config is set to true, then this stream will receive col‐
777 ored output if it is a TTY.
778 logs-max
780 · Default: 10
781 · Type: Number
783 The maximum number of log files to store.
786 long
788 · Default: false
789 · Type: Boolean
791 Show extended information in npm ls and npm search.
794 maxsockets
796 · Default: 50
797 · Type: Number
799 The maximum number of connections to use per origin (protocol/host/port
802 combination). Passed to the http Agent used to make the request.
803 message
805 · Default: "%s"
806 · Type: String
808 Commit message which is used by npm version when creating version com‐
811 mit.
812 Any "%s" in the message will be replaced with the version number.
814 metrics-registry
816 · Default: The value of registry (which defaults to "https://reg‐
817 istry.npmjs.org/")
818 · Type: String
820 The registry you want to send cli metrics to if send-metrics is true.
823 node-options
825 · Default: null
826 · Type: String
828 Options to pass through to Node.js via the NODE_OPTIONS environment
831 variable. This does not impact how npm itself is executed but it does
832 impact how lifecycle scripts are called.
833 node-version
835 · Default: process.version
836 · Type: semver or false
838 The node version to use when checking a package's engines map.
841 noproxy
843 · Default: null
844 · Type: String or Array
846 A comma-separated string or an array of domain extensions that a proxy
849 should not be used for.
850 offline
852 · Default: false
853 · Type: Boolean
855 Force offline mode: no network requests will be done during install. To
858 allow the CLI to fill in missing cache data, see --prefer-offline.
859 onload-script
861 · Default: false
862 · Type: path
864 A node module to require() when npm loads. Useful for programmatic
867 usage.
868 only
870 · Default: null
871 · Type: String
873 When "dev" or "development" and running local npm install without any
876 arguments, only devDependencies (and their dependencies) are installed.
877 When "dev" or "development" and running local npm ls, npm outdated, or
879 npm update, is an alias for --dev.
880 When "prod" or "production" and running local npm install without any
882 arguments, only non-devDependencies (and their dependencies) are
883 installed.
884 When "prod" or "production" and running local npm ls, npm outdated, or
886 npm update, is an alias for --production.
887 optional
889 · Default: true
890 · Type: Boolean
892 Attempt to install packages in the optionalDependencies object. Note
895 that if these packages fail to install, the overall installation
896 process is not aborted.
897 otp
899 · Default: null
900 · Type: Number
902 This is a one-time password from a two-factor authenticator. It's
905 needed when publishing or changing package permissions with npm access.
906 package-lock
908 · Default: true
909 · Type: Boolean
911 If set to false, then ignore package-lock.json files when installing.
914 This will also prevent writing package-lock.json if save is true.
915 When package package-locks are disabled, automatic pruning of extrane‐
917 ous modules will also be disabled. To remove extraneous modules with
918 package-locks disabled use npm prune.
919 This option is an alias for --shrinkwrap.
921 package-lock-only
923 · Default: false
924 · Type: Boolean
926 If set to true, it will update only the package-lock.json, instead of
929 checking node_modules and downloading dependencies.
930 parseable
932 · Default: false
933 · Type: Boolean
935 Output parseable results from commands that write to standard output.
938 For npm search, this will be tab-separated table format.
939 prefer-offline
941 · Default: false
942 · Type: Boolean
944 If true, staleness checks for cached data will be bypassed, but missing
947 data will be requested from the server. To force full offline mode, use
948 --offline.
949 This option is effectively equivalent to --cache-min=9999999.
951 prefer-online
953 · Default: false
954 · Type: Boolean
956 If true, staleness checks for cached data will be forced, making the
959 CLI look for updates immediately even for fresh package data.
960 prefix
962 · Default: see npm help folders
963 · Type: path
965 The location to install global items. If set on the command line, then
968 it forces non-global commands to run in the specified folder.
969 preid
971 · Default: ""
972 · Type: String
974 The "prerelease identifier" to use as a prefix for the "prerelease"
977 part of a semver. Like the rc in 1.2.0-rc.8.
978 production
980 · Default: false
981 · Type: Boolean
983 Set to true to run in "production" mode.
986 1. devDependencies are not installed at the topmost level when running
988 local npm install without any arguments.
989 2. Set the NODE_ENV="production" for lifecycle scripts.
991 progress
994 · Default: true, unless TRAVIS or CI env vars set.
995 · Type: Boolean
997 When set to true, npm will display a progress bar during time intensive
1000 operations, if process.stderr is a TTY.
1001 Set to false to suppress the progress bar.
1003 proxy
1005 · Default: null
1006 · Type: url
1008 A proxy to use for outgoing http requests. If the HTTP_PROXY or
1011 http_proxy environment variables are set, proxy settings will be hon‐
1012 ored by the underlying request library.
1013 read-only
1015 · Default: false
1016 · Type: Boolean
1018 This is used to mark a token as unable to publish when configuring lim‐
1021 ited access tokens with the npm token create command.
1022 rebuild-bundle
1024 · Default: true
1025 · Type: Boolean
1027 Rebuild bundled dependencies after installation.
1030 registry
1032 · Default: https://registry.npmjs.org/
1033 · Type: url
1035 The base URL of the npm package registry.
1038 rollback
1040 · Default: true
1041 · Type: Boolean
1043 Remove failed installs.
1046 save
1048 · Default: true
1049 · Type: Boolean
1051 Save installed packages to a package.json file as dependencies.
1054 When used with the npm rm command, it removes it from the dependencies
1056 object.
1057 Only works if there is already a package.json file present.
1059 save-bundle
1061 · Default: false
1062 · Type: Boolean
1064 If a package would be saved at install time by the use of --save,
1067 --save-dev, or --save-optional, then also put it in the bundleDependen‐
1068 cies list.
1069 When used with the npm rm command, it removes it from the bundledDepen‐
1071 dencies list.
1072 save-prod
1074 · Default: false
1075 · Type: Boolean
1077 Makes sure that a package will be saved into dependencies specifically.
1080 This is useful if a package already exists in devDependencies or
1081 optionalDependencies, but you want to move it to be a production dep.
1082 This is also the default behavior if --save is true, and neither
1083 --save-dev or --save-optional are true.
1084 save-dev
1086 · Default: false
1087 · Type: Boolean
1089 Save installed packages to a package.json file as devDependencies.
1092 When used with the npm rm command, it removes it from the devDependen‐
1094 cies object.
1095 Only works if there is already a package.json file present.
1097 save-exact
1099 · Default: false
1100 · Type: Boolean
1102 Dependencies saved to package.json using --save, --save-dev or
1105 --save-optional will be configured with an exact version rather than
1106 using npm's default semver range operator.
1107 save-optional
1109 · Default: false
1110 · Type: Boolean
1112 Save installed packages to a package.json file as optionalDependencies.
1115 When used with the npm rm command, it removes it from the devDependen‐
1117 cies object.
1118 Only works if there is already a package.json file present.
1120 save-prefix
1122 · Default: '^'
1123 · Type: String
1125 Configure how versions of packages installed to a package.json file via
1128 --save or --save-dev get prefixed.
1129 For example if a package has version 1.2.3, by default its version is
1131 set to ^1.2.3 which allows minor upgrades for that package, but after
1132 npm config set save-prefix='~' it would be set to ~1.2.3 which only
1133 allows patch upgrades.
1134 scope
1136 · Default: the scope of the current project, if any, or ""
1137 · Type: String
1139 Associate an operation with a scope for a scoped registry. Useful when
1142 logging in to a private registry for the first time: npm login
1143 --scope=@organization --registry=registry.organization.com, which will
1144 cause @organization to be mapped to the registry for future installa‐
1145 tion of packages specified according to the pattern @organization/pack‐
1146 age.
1147 script-shell
1149 · Default: null
1150 · Type: path
1152 The shell to use for scripts run with the npm run command.
1155 scripts-prepend-node-path
1157 · Default: "warn-only"
1158 · Type: Boolean, "auto" or "warn-only"
1160 If set to true, add the directory in which the current node executable
1163 resides to the PATH environment variable when running scripts, even if
1164 that means that npm will invoke a different node executable than the
1165 one which it is running.
1166 If set to false, never modify PATH with that.
1168 If set to "warn-only", never modify PATH but print a warning if npm
1170 thinks that you may want to run it with true, e.g. because the node
1171 executable in the PATH is not the one npm was invoked with.
1172 If set to auto, only add that directory to the PATH environment vari‐
1174 able if the node executable with which npm was invoked and the one that
1175 is found first on the PATH are different.
1176 searchexclude
1178 · Default: ""
1179 · Type: String
1181 Space-separated options that limit the results from search.
1184 searchopts
1186 · Default: ""
1187 · Type: String
1189 Space-separated options that are always passed to search.
1192 searchlimit
1194 · Default: 20
1195 · Type: Number
1197 Number of items to limit search results to. Will not apply at all to
1200 legacy searches.
1201 searchstaleness
1203 · Default: 900 (15 minutes)
1204 · Type: Number
1206 The age of the cache, in seconds, before another registry request is
1209 made if using legacy search endpoint.
1210 send-metrics
1212 · Default: false
1213 · Type: Boolean
1215 If true, success/failure metrics will be reported to the registry
1218 stored in metrics-registry. These requests contain the number of suc‐
1219 cessful and failing runs of the npm CLI and the time period overwhich
1220 those counts were gathered. No identifying information is included in
1221 these requests.
1222 shell
1224 · Default: SHELL environment variable, or "bash" on Posix, or "cmd" on
1225 Windows
1226 · Type: path
1228 The shell to run for the npm explore command.
1231 shrinkwrap
1233 · Default: true
1234 · Type: Boolean
1236 If set to false, then ignore npm-shrinkwrap.json files when installing.
1239 This will also prevent writing npm-shrinkwrap.json if save is true.
1240 This option is an alias for --package-lock.
1242 sign-git-commit
1244 · Default: false
1245 · Type: Boolean
1247 If set to true, then the npm version command will commit the new pack‐
1250 age version using -S to add a signature.
1251 Note that git requires you to have set up GPG keys in your git configs
1253 for this to work properly.
1254 sign-git-tag
1256 · Default: false
1257 · Type: Boolean
1259 If set to true, then the npm version command will tag the version using
1262 -s to add a signature.
1263 Note that git requires you to have set up GPG keys in your git configs
1265 for this to work properly.
1266 sso-poll-frequency
1268 · Default: 500
1269 · Type: Number
1271 When used with SSO-enabled auth-types, configures how regularly the
1274 registry should be polled while the user is completing authentication.
1275 sso-type
1277 · Default: 'oauth'
1278 · Type: 'oauth', 'saml', or null
1280 If --auth-type=sso, the type of SSO type to use.
1283 strict-ssl
1285 · Default: true
1286 · Type: Boolean
1288 Whether or not to do SSL key validation when making requests to the
1291 registry via https.
1292 See also the ca config.
1294 tag
1296 · Default: latest
1297 · Type: String
1299 If you ask npm to install a package and don't tell it a specific ver‐
1302 sion, then it will install the specified tag.
1303 Also the tag that is added to the package@version specified by the npm
1305 tag command, if no explicit tag is given.
1306 tag-version-prefix
1308 · Default: "v"
1309 · Type: String
1311 If set, alters the prefix used when tagging a new version when perform‐
1314 ing a version increment using npm-version. To remove the prefix alto‐
1315 gether, set it to the empty string: "".
1316 Because other tools may rely on the convention that npm version tags
1318 look like v1.0.0, only use this property if it is absolutely necessary.
1319 In particular, use care when overriding this setting for public pack‐
1320 ages.
1321 timing
1323 · Default: false
1324 · Type: Boolean
1326 If true, writes an npm-debug log to _logs and timing information to
1329 _timing.json, both in your cache. _timing.json is a newline delimited
1330 list of JSON objects. You can quickly view it with this json
1331 https://www.npmjs.com/package/json command line: json -g < ~/.npm/_tim‐
1332 ing.json.
1333 tmp
1335 · Default: TMPDIR environment variable, or "/tmp"
1336 · Type: path
1338 Where to store temporary files and folders. All temp files are deleted
1341 on success, but left behind on failure for forensic purposes.
1342 unicode
1344 · Default: false on windows, true on mac/unix systems with a unicode
1345 locale
1346 · Type: Boolean
1348 When set to true, npm uses unicode characters in the tree output. When
1351 false, it uses ascii characters to draw trees.
1352 unsafe-perm
1354 · Default: false if running as root, true otherwise
1355 · Type: Boolean
1357 Set to true to suppress the UID/GID switching when running package
1360 scripts. If set explicitly to false, then installing as a non-root
1361 user will fail.
1362 update-notifier
1364 · Default: true
1365 · Type: Boolean
1367 Set to false to suppress the update notification when using an older
1370 version of npm than the latest.
1371 usage
1373 · Default: false
1374 · Type: Boolean
1376 Set to show short usage output (like the -H output) instead of complete
1379 help when doing npm help help.
1380 user
1382 · Default: "nobody"
1383 · Type: String or Number
1385 The UID to set to when running package scripts as root.
1388 userconfig
1390 · Default: ~/.npmrc
1391 · Type: path
1393 The location of user-level configuration settings.
1396 umask
1398 · Default: 022
1399 · Type: Octal numeric string in range 0000..0777 (0..511)
1401 The "umask" value to use when setting the file creation mode on files
1404 and folders.
1405 Folders and executables are given a mode which is 0777 masked against
1407 this value. Other files are given a mode which is 0666 masked against
1408 this value. Thus, the defaults are 0755 and 0644 respectively.
1409 user-agent
1411 · Default: node/{process.version} {process.platform} {process.arch}
1412 · Type: String
1414 Sets a User-Agent to the request header
1417 version
1419 · Default: false
1420 · Type: boolean
1422 If true, output the npm version and exit successfully.
1425 Only relevant when specified explicitly on the command line.
1427 versions
1429 · Default: false
1430 · Type: boolean
1432 If true, output the npm version as well as node's process.versions map,
1435 and exit successfully.
1436 Only relevant when specified explicitly on the command line.
1438 viewer
1440 · Default: "man" on Posix, "browser" on Windows
1441 · Type: path
1443 The program to use to view help content.
1446 Set to "browser" to view html help content in the default web browser.
1448 See also
1450 · npm help config
1451 · npm help npmrc
1453 · npm help scripts
1455 · npm help folders
1457 · npm help npm
1459 February 2021 CONFIG(7)