1firewallgui_selinux(8)    SELinux Policy firewallgui    firewallgui_selinux(8)
2
3
4

NAME

6       firewallgui_selinux  - Security Enhanced Linux Policy for the firewall‐
7       gui processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the firewallgui processes via  flexible
11       mandatory access control.
12
13       The  firewallgui processes execute with the firewallgui_t SELinux type.
14       You can check if you have these processes running by executing  the  ps
15       command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep firewallgui_t
20
21
22

ENTRYPOINTS

24       The  firewallgui_t  SELinux  type  can  be  entered  via  the firewall‐
25       gui_exec_t file type.
26
27       The default entrypoint paths for the firewallgui_t domain are the  fol‐
28       lowing:
29
30       /usr/share/system-config-firewall/system-config-firewall-mechanism.py
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       firewallgui policy is very flexible allowing users to setup their fire‐
40       wallgui processes in as secure a method as possible.
41
42       The following process types are defined for firewallgui:
43
44       firewallgui_t
45
46       Note: semanage permissive -a firewallgui_t can  be  used  to  make  the
47       process  type firewallgui_t permissive. SELinux does not deny access to
48       permissive process types, but the AVC (SELinux  denials)  messages  are
49       still generated.
50
51

BOOLEANS

53       SELinux  policy  is customizable based on least access required.  fire‐
54       wallgui policy is extremely flexible  and  has  several  booleans  that
55       allow  you to manipulate the policy and run firewallgui with the tight‐
56       est access possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66
67       If  you  want  to  allow  system  to run with NIS, you must turn on the
68       nis_enabled boolean. Disabled by default.
69
70       setsebool -P nis_enabled 1
71
72
73

MANAGED FILES

75       The SELinux process type firewallgui_t can manage  files  labeled  with
76       the  following  file types.  The paths listed are the default paths for
77       these file types.  Note the processes UID still need to have  DAC  per‐
78       missions.
79
80       systemd_passwd_var_run_t
81
82            /var/run/systemd/ask-password(/.*)?
83            /var/run/systemd/ask-password-block(/.*)?
84
85

FILE CONTEXTS

87       SELinux requires files to have an extended attribute to define the file
88       type.
89
90       You can see the context of a file using the -Z option to ls
91
92       Policy governs the access  confined  processes  have  to  these  files.
93       SELinux  firewallgui  policy  is  very flexible allowing users to setup
94       their firewallgui processes in as secure a method as possible.
95
96       STANDARD FILE CONTEXT
97
98       SELinux defines the file context types  for  the  firewallgui,  if  you
99       wanted  to store files with these types in a diffent paths, you need to
100       execute the semanage command to sepecify alternate  labeling  and  then
101       use restorecon to put the labels on disk.
102
103       semanage  fcontext  -a  -t  firewallgui_tmp_t  '/srv/myfirewallgui_con‐
104       tent(/.*)?'
105       restorecon -R -v /srv/myfirewallgui_content
106
107       Note: SELinux often uses regular expressions  to  specify  labels  that
108       match multiple files.
109
110       The following file types are defined for firewallgui:
111
112
113
114       firewallgui_exec_t
115
116       - Set files with the firewallgui_exec_t type, if you want to transition
117       an executable to the firewallgui_t domain.
118
119
120
121       firewallgui_tmp_t
122
123       - Set files with the firewallgui_tmp_t type, if you want to store fire‐
124       wallgui temporary files in the /tmp directories.
125
126
127
128       Note:  File context can be temporarily modified with the chcon command.
129       If you want to permanently change the file context you need to use  the
130       semanage fcontext command.  This will modify the SELinux labeling data‐
131       base.  You will need to use restorecon to apply the labels.
132
133

COMMANDS

135       semanage fcontext can also be used to manipulate default  file  context
136       mappings.
137
138       semanage  permissive  can  also  be used to manipulate whether or not a
139       process type is permissive.
140
141       semanage module can also be used to enable/disable/install/remove  pol‐
142       icy modules.
143
144       semanage boolean can also be used to manipulate the booleans
145
146
147       system-config-selinux is a GUI tool available to customize SELinux pol‐
148       icy settings.
149
150

AUTHOR

152       This manual page was auto-generated using sepolicy manpage .
153
154

SEE ALSO

156       selinux(8),  firewallgui(8),  semanage(8),   restorecon(8),   chcon(1),
157       sepolicy(8), setsebool(8)
158
159
160
161firewallgui                        21-03-26             firewallgui_selinux(8)
Impressum