1PVSCAN(8)                   System Manager's Manual                  PVSCAN(8)
2
3
4

NAME

6       pvscan - List all physical volumes
7

SYNOPSIS

9       pvscan option_args
10           [ option_args ]
11           [ position_args ]
12

DESCRIPTION

14       When called without the --cache option, pvscan lists PVs on the system,
15       like pvs(8) or pvdisplay(8).
16
17       When the --cache and -aay options are used, pvscan  records  which  PVs
18       are  available on the system, and activates LVs in completed VGs.  A VG
19       is complete when pvscan sees that the final PV in the VG has  appeared.
20       This  is used by event-based system startup (systemd, udev) to activate
21       LVs.
22
23       The four main variations of this are:
24
25       pvscan --cache device
26
27       If device is present, lvm adds a  record  that  the  PV  on  device  is
28       online.   If  device  is not present, lvm removes the online record for
29       the PV.  In most cases, the pvscan will only read the named devices.
30
31       pvscan --cache -aay device...
32
33       This begins by performing the same steps as above.  Afterward,  if  the
34       VG  for  the specified PV is complete, then pvscan will activate LVs in
35       the VG (the same as vgchange -aay vgname would do.)
36
37       pvscan --cache
38
39       This first clears all  existing  PV  online  records,  then  scans  all
40       devices  on  the  system, adding PV online records for any PVs that are
41       found.
42
43       pvscan --cache -aay
44
45       This begins by performing the same steps as pvscan --cache.  Afterward,
46       it activates LVs in any complete VGs.
47
48       To  prevent  devices  from being scanned by pvscan --cache, add them to
49       lvm.conf(5) devices/global_filter.  For more information, see:
50       lvmconfig --withcomments devices/global_filter
51
52       Auto-activation of VGs or LVs can be enabled/disabled using:
53       lvm.conf(5) activation/auto_activation_volume_list
54
55       For more information, see:
56       lvmconfig --withcomments activation/auto_activation_volume_list
57
58       To disable auto-activation, explicitly set this list to an empty  list,
59       i.e. auto_activation_volume_list = [ ].
60
61       When this setting is undefined (e.g. commented), then all LVs are auto-
62       activated.
63
64

USAGE

66       Display PV information.
67
68       pvscan
69           [ -e|--exported ]
70           [ -n|--novolumegroup ]
71           [ -s|--short ]
72           [ -u|--uuid ]
73           [ COMMON_OPTIONS ]
74
75       Autoactivate a VG when all PVs are online.
76
77       pvscan --cache
78           [ -a|--activate ay ]
79           [ -j|--major Number ]
80           [    --minor Number ]
81           [    --noudevsync ]
82           [ COMMON_OPTIONS ]
83           [ String|PV ... ]
84
85       Common options for command:
86           [    --ignorelockingfailure ]
87           [    --reportformat basic|json ]
88
89       Common options for lvm:
90           [ -d|--debug ]
91           [ -h|--help ]
92           [ -q|--quiet ]
93           [ -t|--test ]
94           [ -v|--verbose ]
95           [ -y|--yes ]
96           [    --commandprofile String ]
97           [    --config String ]
98           [    --driverloaded y|n ]
99           [    --lockopt String ]
100           [    --longhelp ]
101           [    --nolocking ]
102           [    --profile String ]
103           [    --version ]
104

OPTIONS

106       -a|--activate y|n|ay
107              Auto-activate LVs in a VG when the PVs scanned have completed
108              the VG.  (Only ay is applicable.)
109
110       --cache
111              Scan one or more devices and record that they are online.
112
113       --commandprofile String
114              The command profile to use for command configuration.  See
115              lvm.conf(5) for more information about profiles.
116
117       --config String
118              Config settings for the command. These override lvm.conf set‐
119              tings.  The String arg uses the same format as lvm.conf, or may
120              use section/field syntax.  See lvm.conf(5) for more information
121              about config.
122
123       -d|--debug ...
124              Set debug level. Repeat from 1 to 6 times to increase the detail
125              of messages sent to the log file and/or syslog (if configured).
126
127       --driverloaded y|n
128              If set to no, the command will not attempt to use device-mapper.
129              For testing and debugging.
130
131       -e|--exported
132              Only show PVs belonging to exported VGs.
133
134       -h|--help
135              Display help text.
136
137       --ignorelockingfailure
138              Allows a command to continue with read-only metadata operations
139              after locking failures.
140
141       --lockopt String
142              Used to pass options for special cases to lvmlockd.  See lvm‐
143              lockd(8) for more information.
144
145       --longhelp
146              Display long help text.
147
148       -j|--major Number
149              The major number of a device.
150
151       --minor Number
152              The minor number of a device.
153
154       --nolocking
155              Disable locking.
156
157       --noudevsync
158              Disables udev synchronisation. The process will not wait for
159              notification from udev. It will continue irrespective of any
160              possible udev processing in the background. Only use this if
161              udev is not running or has rules that ignore the devices LVM
162              creates.
163
164       -n|--novolumegroup
165              Only show PVs not belonging to any VG.
166
167       --profile String
168              An alias for --commandprofile or --metadataprofile, depending on
169              the command.
170
171       -q|--quiet ...
172              Suppress output and log messages. Overrides --debug and --ver‐
173              bose.  Repeat once to also suppress any prompts with answer
174              'no'.
175
176       --reportformat basic|json
177              Overrides current output format for reports which is defined
178              globally by the report/output_format setting in lvm.conf.  basic
179              is the original format with columns and rows.  If there is more
180              than one report per command, each report is prefixed with the
181              report name for identification. json produces report output in
182              JSON format. See lvmreport(7) for more information.
183
184       -s|--short
185              Short listing format.
186
187       -t|--test
188              Run in test mode. Commands will not update metadata.  This is
189              implemented by disabling all metadata writing but nevertheless
190              returning success to the calling function. This may lead to
191              unusual error messages in multi-stage operations if a tool
192              relies on reading back metadata it believes has changed but
193              hasn't.
194
195       -u|--uuid
196              Show UUIDs in addition to device names.
197
198       -v|--verbose ...
199              Set verbose level. Repeat from 1 to 4 times to increase the
200              detail of messages sent to stdout and stderr.
201
202       --version
203              Display version information.
204
205       -y|--yes
206              Do not prompt for confirmation interactively but always assume
207              the answer yes. Use with extreme caution.  (For automatic no,
208              see -qq.)
209

VARIABLES

211       PV
212              Physical  Volume  name,  a device path under /dev.  For commands
213              managing physical extents, a PV positional arg generally accepts
214              a  suffix  indicating  a  range (or multiple ranges) of physical
215              extents (PEs). When the first PE is omitted, it defaults to  the
216              start of the device, and when the last PE is omitted it defaults
217              to end.  Start and end range (inclusive):  PV[:PE-PE]...   Start
218              and length range (counting from 0): PV[:PE+PE]...
219
220       String
221              See the option description for information about the string con‐
222              tent.
223
224       Size[UNIT]
225              Size is an input number that accepts an  optional  unit.   Input
226              units are always treated as base two values, regardless of capi‐
227              talization, e.g. 'k' and 'K' both refer to  1024.   The  default
228              input unit is specified by letter, followed by |UNIT.  UNIT rep‐
229              resents other possible input units:  bBsSkKmMgGtTpPeE.   b|B  is
230              bytes,  s|S  is  sectors  of 512 bytes, k|K is kilobytes, m|M is
231              megabytes, g|G is gigabytes, t|T is terabytes, p|P is petabytes,
232              e|E  is  exabytes.  (This should not be confused with the output
233              control --units, where capital letters mean multiple of 1000.)
234

ENVIRONMENT VARIABLES

236       See lvm(8) for information about environment  variables  used  by  lvm.
237       For example, LVM_VG_NAME can generally be substituted for a required VG
238       parameter.
239

SEE ALSO

241       lvm(8) lvm.conf(5) lvmconfig(8)
242
243       pvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8)  pvmove(8)  pvremove(8)
244       pvresize(8) pvs(8) pvscan(8)
245
246       vgcfgbackup(8)  vgcfgrestore(8)  vgchange(8) vgck(8) vgcreate(8) vgcon‐
247       vert(8)  vgdisplay(8)  vgexport(8)  vgextend(8)  vgimport(8)  vgimport‐
248       clone(8)  vgmerge(8)  vgmknodes(8)  vgreduce(8) vgremove(8) vgrename(8)
249       vgs(8) vgscan(8) vgsplit(8)
250
251       lvcreate(8) lvchange(8)  lvconvert(8)  lvdisplay(8)  lvextend(8)  lvre‐
252       duce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
253
254       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeacti‐
255       vate(8) lvmdump(8)
256
257       dmeventd(8) lvmpolld(8)  lvmlockd(8)  lvmlockctl(8)  cmirrord(8)  lvmd‐
258       busd(8)
259
260       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)
261
262
263
264Red Hat, Inc.          LVM TOOLS 2.03.10(2) (2020-08-09)             PVSCAN(8)
Impressum