1General(3)            User Contributed Perl Documentation           General(3)
2
3
4

NAME

6       Config::General - Generic Config Module
7

SYNOPSIS

9        #
10        # the OOP way
11        use Config::General;
12        $conf = Config::General->new("rcfile");
13        my %config = $conf->getall;
14
15        #
16        # the procedural way
17        use Config::General qw(ParseConfig SaveConfig SaveConfigString);
18        my %config = ParseConfig("rcfile");
19

DESCRIPTION

21       This module opens a config file and parses its contents for you. The
22       new method requires one parameter which needs to be a filename. The
23       method getall returns a hash which contains all options and its
24       associated values of your config file.
25
26       The format of config files supported by Config::General is inspired by
27       the well known Apache config format, in fact, this module is 100%
28       compatible to Apache configs, but you can also just use simple
29        name/value pairs in your config files.
30
31       In addition to the capabilities of an Apache config file it supports
32       some enhancements such as here-documents, C-style comments or multiline
33       options.
34

SUBROUTINES/METHODS

36       new()
37           Possible ways to call new():
38
39            $conf = Config::General->new("rcfile");
40
41            $conf = Config::General->new(\%somehash);
42
43            $conf = Config::General->new( %options ); # see below for description of possible options
44
45           This method returns a Config::General object (a hash blessed into
46           "Config::General" namespace.  All further methods must be used from
47           that returned object. see below.
48
49           You can use the new style with hash parameters or the old style
50           which is of course still supported. Possible parameters to new()
51           are:
52
53           * a filename of a configfile, which will be opened and parsed by
54           the parser
55
56           or
57
58           * a hash reference, which will be used as the config.
59
60           An alternative way to call new() is supplying an option- hash with
61           one or more of the following keys set:
62
63           -ConfigFile
64               A filename or a filehandle, i.e.:
65
66                -ConfigFile => "rcfile" or -ConfigFile => \$FileHandle
67
68           -ConfigHash
69               A hash reference, which will be used as the config, i.e.:
70
71                -ConfigHash => \%somehash
72
73           -String
74               A string which contains a whole config, or an arrayref
75               containing the whole config line by line.  The parser will
76               parse the contents of the string instead of a file. i.e:
77
78                -String => $complete_config
79
80               it is also possible to feed an array reference to -String:
81
82                -String => \@config_lines
83
84           -AllowMultiOptions
85               If the value is "no", then multiple identical options are
86               disallowed.  The default is "yes".  i.e.:
87
88                -AllowMultiOptions => "yes"
89
90               see IDENTICAL OPTIONS for details.
91
92           -LowerCaseNames
93               If set to a true value, then all options found in the config
94               will be converted to lowercase. This allows you to provide
95               case-in-sensitive configs. The values of the options will not
96               lowercased.
97
98           -UseApacheInclude
99               If set to a true value, the parser will consider "include ..."
100               as valid include statement (just like the well known Apache
101               include statement).
102
103               It also supports apache's "IncludeOptional" statement with the
104               same behavior, that is, if the include file doesn't exist no
105               error will be thrown.
106
107           -IncludeRelative
108               If set to a true value, included files with a relative path
109               (i.e. "cfg/blah.conf") will be opened from within the location
110               of the configfile instead from within the location of the
111               script($0). This works only if the configfile has a absolute
112               pathname (i.e. "/etc/main.conf").
113
114               If the variable -ConfigPath has been set and if the file to be
115               included could not be found in the location relative to the
116               current config file, the module will search within -ConfigPath
117               for the file. See the description of -ConfigPath for more
118               details.
119
120           -IncludeDirectories
121               If set to a true value, you may specify include a directory, in
122               which case all files inside the directory will be loaded in
123               ASCII order.  Directory includes will not recurse into
124               subdirectories.  This is comparable to including a directory in
125               Apache-style config files.
126
127           -IncludeGlob
128               If set to a true value, you may specify a glob pattern for an
129               include to include all matching files (e.g. <<include
130               conf.d/*.conf>>).  Also note that as with standard file
131               patterns, * will not match dot-files, so <<include dir/*>> is
132               often more desirable than including a directory with
133               -IncludeDirectories.
134
135               An include option will not cause a parser error if the glob
136               didn't return anything.
137
138           -IncludeAgain
139               If set to a true value, you will be able to include a sub-
140               configfile multiple times.  With the default, false, you will
141               get a warning about duplicate includes and only the first
142               include will succeed.
143
144               Reincluding a configfile can be useful if it contains data that
145               you want to be present in multiple places in the data tree.
146               See the example under "INCLUDES".
147
148               Note, however, that there is currently no check for include
149               recursion.
150
151           -ConfigPath
152               As mentioned above, you can use this variable to specify a
153               search path for relative config files which have to be
154               included. Config::General will search within this path for the
155               file if it cannot find the file at the location relative to the
156               current config file.
157
158               To provide multiple search paths you can specify an array
159               reference for the path.  For example:
160
161                @path = qw(/usr/lib/perl /nfs/apps/lib /home/lib);
162                ..
163                -ConfigPath => \@path
164
165           -MergeDuplicateBlocks
166               If set to a true value, then duplicate blocks, that means
167               blocks and named blocks, will be merged into a single one (see
168               below for more details on this).  The default behavior of
169               Config::General is to create an array if some junk in a config
170               appears more than once.
171
172           -MergeDuplicateOptions
173               If set to a true value, then duplicate options will be merged.
174               That means, if the same option occurs more than once, the last
175               one will be used in the resulting config hash.
176
177               Setting this option implies -AllowMultiOptions == false unless
178               you set -AllowMultiOptions explicit to 'true'. In this case
179               duplicate blocks are allowed and put into an array but
180               duplicate options will be merged.
181
182           -AutoLaunder
183               If set to a true value, then all values in your config file
184               will be laundered to allow them to be used under a -T taint
185               flag.  This could be regarded as circumventing the purpose of
186               the -T flag, however, if the bad guys can mess with your config
187               file, you have problems that -T will not be able to stop.
188               AutoLaunder will only handle a config file being read from
189               -ConfigFile.
190
191           -AutoTrue
192               If set to a true value, then options in your config file, whose
193               values are set to true or false values, will be normalised to 1
194               or 0 respectively.
195
196               The following values will be considered as true:
197
198                yes, on, 1, true
199
200               The following values will be considered as false:
201
202                no, off, 0, false
203
204               This effect is case-insensitive, i.e. both "Yes" or "No" will
205               result in 1.
206
207           -FlagBits
208               This option takes one required parameter, which must be a hash
209               reference.
210
211               The supplied hash reference needs to define variables for which
212               you want to preset values. Each variable you have defined in
213               this hash-ref and which occurs in your config file, will cause
214               this variable being set to the preset values to which the value
215               in the config file refers to.
216
217               Multiple flags can be used, separated by the pipe character |.
218
219               Well, an example will clarify things:
220
221                my $conf = Config::General->new(
222                        -ConfigFile => "rcfile",
223                        -FlagBits => {
224                             Mode => {
225                                CLEAR    => 1,
226                                STRONG   => 1,
227                                UNSECURE => "32bit" }
228                        }
229                );
230
231               In this example we are defining a variable named "Mode" which
232               may contain one or more of "CLEAR", "STRONG" and "UNSECURE" as
233               value.
234
235               The appropriate config entry may look like this:
236
237                # rcfile
238                Mode = CLEAR | UNSECURE
239
240               The parser will create a hash which will be the value of the
241               key "Mode". This hash will contain all flags which you have
242               pre-defined, but only those which were set in the config will
243               contain the pre-defined value, the other ones will be
244               undefined.
245
246               The resulting config structure would look like this after
247               parsing:
248
249                %config = (
250                            Mode => {
251                                      CLEAR    => 1,
252                                      UNSECURE => "32bit",
253                                      STRONG   => undef,
254                                    }
255                          );
256
257               This method allows the user (or, the "maintainer" of the
258               configfile for your application) to set multiple pre-defined
259               values for one option.
260
261               Please beware, that all occurrences of those variables will be
262               handled this way, there is no way to distinguish between
263               variables in different scopes.  That means, if "Mode" would
264               also occur inside a named block, it would also parsed this way.
265
266               Values which are not defined in the hash-ref supplied to the
267               parameter -FlagBits and used in the corresponding variable in
268               the config will be ignored.
269
270               Example:
271
272                # rcfile
273                Mode = BLAH | CLEAR
274
275               would result in this hash structure:
276
277                 %config = (
278                            Mode => {
279                                      CLEAR    => 1,
280                                      UNSECURE => undef,
281                                      STRONG   => undef,
282                                    }
283                          );
284
285               "BLAH" will be ignored silently.
286
287           -DefaultConfig
288               This can be a hash reference or a simple scalar (string) of a
289               config. This causes the module to preset the resulting config
290               hash with the given values, which allows you to set default
291               values for particular config options directly.
292
293               Note that you probably want to use this with
294               -MergeDuplicateOptions, otherwise a default value already in
295               the configuration file will produce an array of two values.
296
297           -Tie
298               -Tie takes the name of a Tie class as argument that each new
299               hash should be based off of.
300
301               This hash will be used as the 'backing hash' instead of a
302               standard Perl hash, which allows you to affect the way,
303               variable storing will be done. You could, for example supply a
304               tied hash, say Tie::DxHash, which preserves ordering of the
305               keys in the config (which a standard Perl hash won't do). Or,
306               you could supply a hash tied to a DBM file to save the parsed
307               variables to disk.
308
309               There are many more things to do in tie-land, see tie to get
310               some interesting ideas.
311
312               If you want to use the -Tie feature together with
313               -DefaultConfig make sure that the hash supplied to
314               -DefaultConfig must be tied to the same Tie class.
315
316               Make sure that the hash which receives the generated hash
317               structure (e.g. which you are using in the assignment: %hash =
318               $config->getall()) must be tied to the same Tie class.
319
320               Example:
321
322                use Config::General qw(ParseConfig);
323                use Tie::IxHash;
324                tie my %hash, "Tie::IxHash";
325                %hash = ParseConfig(
326                          -ConfigFile => shift(),
327                          -Tie => "Tie::IxHash"
328                        );
329
330           -InterPolateVars
331               If set to a true value, variable interpolation will be done on
332               your config input. See Config::General::Interpolated for more
333               information.
334
335           -InterPolateEnv
336               If set to a true value, environment variables can be used in
337               configs.
338
339               This implies -InterPolateVars.
340
341           -AllowSingleQuoteInterpolation
342               By default variables inside single quotes will not be
343               interpolated. If you turn on this option, they will be
344               interpolated as well.
345
346           -ExtendedAccess
347               If set to a true value, you can use object oriented (extended)
348               methods to access the parsed config. See
349               Config::General::Extended for more information.
350
351           -StrictObjects
352               By default this is turned on, which causes Config::General to
353               croak with an error if you try to access a non-existent key
354               using the OOP-way (-ExtendedAcess enabled). If you turn
355               -StrictObjects off (by setting to 0 or "no") it will just
356               return an empty object/hash/scalar. This is valid for OOP-
357               access 8via AUTOLOAD and for the methods obj(), hash() and
358               value().
359
360           -StrictVars
361               By default this is turned on, which causes Config::General to
362               croak with an error if an undefined variable with
363               InterPolateVars turned on occurs in a config. Set to false
364               (i.e. 0) to avoid such error messages.
365
366           -SplitPolicy
367               You can influence the way how Config::General decides which
368               part of a line in a config file is the key and which one is the
369               value. By default it tries its best to guess. That means you
370               can mix equalsign assignments and whitespace assignments.
371
372               However, sometime you may wish to make it more strictly for
373               some reason. In this case you can set -SplitPolicy. The
374               possible values are: 'guess' which is the default, 'whitespace'
375               which causes the module to split by whitespace, 'equalsign'
376               which causes it to split strictly by equal sign, or 'custom'.
377               In the latter case you must also set -SplitDelimiter to some
378               regular expression of your choice. For example:
379
380                -SplitDelimiter => '\s*:\s*'
381
382               will cause the module to split by colon while whitespace which
383               surrounds the delimiter will be removed.
384
385               Please note that the delimiter used when saving a config
386               (save_file() or save_string()) will be chosen according to the
387               current -SplitPolicy. If -SplitPolicy is set to 'guess' or
388               'whitespace', 3 spaces will be used to delimit saved options.
389               If 'custom' is set, then you need to set -StoreDelimiter.
390
391           -SplitDelimiter
392               Set this to any arbitrary regular expression which will be used
393               for option/value splitting. -SplitPolicy must be set to
394               'custom' to make this work.
395
396           -StoreDelimiter
397               You can use this parameter to specify a custom delimiter to use
398               when saving configs to a file or string. You only need to set
399               it if you want to store the config back to disk and if you have
400               -SplitPolicy set to 'custom'.
401
402               However, this parameter takes precedence over whatever is set
403               for -SplitPolicy.
404
405               Be very careful with this parameter.
406
407           -CComments
408               Config::General is able to notice c-style comments (see section
409               COMMENTS).  But for some reason you might no need this. In this
410               case you can turn this feature off by setting -CComments to a
411               false value('no', 0, 'off').
412
413               By default -CComments is turned on.
414
415           -BackslashEscape
416               Deprecated Option.
417
418           -SlashIsDirectory
419               If you turn on this parameter, a single slash as the last
420               character of a named block will be considered as a directory
421               name.
422
423               By default this flag is turned off, which makes the module
424               somewhat incompatible to Apache configs, since such a setup
425               will be normally considered as an explicit empty block, just as
426               XML defines it.
427
428               For example, if you have the following config:
429
430                <Directory />
431                  Index index.awk
432                </Directory>
433
434               you will get such an error message from the parser:
435
436                EndBlock "</Directory>" has no StartBlock statement (level: 1, chunk 10)!
437
438               This is caused by the fact that the config chunk below will be
439               internally converted to:
440
441                <Directory></Directory>
442                  Index index.awk
443                </Directory>
444
445               Now there is one '</Directory>' too much. The proper solution
446               is to use quotation to circumvent this error:
447
448                <Directory "/">
449                  Index index.awk
450                </Directory>
451
452               However, a raw apache config comes without such quotes. In this
453               case you may consider to turn on -SlashIsDirectory.
454
455               Please note that this is a new option (incorporated in version
456               2.30), it may lead to various unexpected side effects or other
457               failures.  You've been warned.
458
459           -UseApacheIfDefine
460               Enables support for Apache <IfDefine> ... </IfDefine>. See
461               -Define.
462
463           -Define
464               Defines the symbols to be used for conditional configuration
465               files.  Allowed arguments: scalar, scalar ref, array ref or
466               hash ref.
467
468               Examples:
469
470                -Define => 'TEST'
471                -Define => \$testOrProduction
472                -Define => [qw(TEST VERBOSE)]
473                -Define => {TEST => 1, VERBOSE => 1}
474
475               Sample configuration:
476
477                 <Logging>
478                   <IfDefine TEST>
479                      Level Debug
480                      include test/*.cfg
481                   </IfDef>
482                   <IfDefine !TEST>
483                     Level Notice
484                      include production/*.cfg
485                   </IfDefine>
486                 </Logging>
487
488           -ApacheCompatible
489               Over the past years a lot of options has been incorporated into
490               Config::General to be able to parse real Apache configs.
491
492               The new -ApacheCompatible option now makes it possible to tweak
493               all options in a way that Apache configs can be parsed.
494
495               This is called "apache compatibility mode" - if you will ever
496               have problems with parsing Apache configs without this option
497               being set, you'll get no help by me. Thanks :)
498
499               The following options will be set:
500
501                UseApacheInclude   = 1
502                IncludeRelative    = 1
503                IncludeDirectories = 1
504                IncludeGlob        = 1
505                SlashIsDirectory   = 1
506                SplitPolicy        = 'whitespace'
507                CComments          = 0
508                UseApacheIfDefine  = 1
509
510               Take a look into the particular documentation sections what
511               those options are doing.
512
513               Beside setting some options it also turns off support for
514               explicit empty blocks.
515
516           -UTF8
517               If turned on, all files will be opened in utf8 mode. This may
518               not work properly with older versions of Perl.
519
520           -SaveSorted
521               If you want to save configs in a sorted manner, turn this
522               parameter on. It is not enabled by default.
523
524           -NoEscape
525               If you want to use the data ( scalar or final leaf ) without
526               escaping special character, turn this parameter on. It is not
527               enabled by default.
528
529           -NormalizeBlock
530               Takes a subroutine reference as parameter and gets the current
531               block or blockname passed as parameter and is expected to
532               return it in some altered way as a scalar string. The sub will
533               be called before anything else will be done by the module
534               itself (e.g. interpolation).
535
536               Example:
537
538                -NormalizeBlock => sub { my $x = shift; $x =~ s/\s*$//; $x; }
539
540               This removes trailing whitespaces of block names.
541
542           -NormalizeOption
543               Same as -NormalizeBlock but applied on options only.
544
545           -NormalizeValue
546               Same as -NormalizeBlock but applied on values only.
547
548       getall()
549           Returns a hash structure which represents the whole config.
550
551       files()
552           Returns a list of all files read in.
553
554       save_file()
555           Writes the config hash back to the hard disk. This method takes one
556           or two parameters. The first parameter must be the filename where
557           the config should be written to. The second parameter is optional,
558           it must be a reference to a hash structure, if you set it. If you
559           do not supply this second parameter then the internal config hash,
560           which has already been parsed, will be used.
561
562           Please note that any occurrence of comments will be ignored by
563           getall() and thus be lost after you call this method.
564
565           You need also to know that named blocks will be converted to nested
566           blocks (which is the same from the perl point of view). An example:
567
568            <user hans>
569              id 13
570            </user>
571
572           will become the following after saving:
573
574            <user>
575              <hans>
576                 id 13
577              </hans>
578            </user>
579
580           Example:
581
582            $conf_obj->save_file("newrcfile", \%config);
583
584           or, if the config has already been parsed, or if it didn't change:
585
586            $conf_obj->save_file("newrcfile");
587
588       save_string()
589           This method is equivalent to the previous save_file(), but it does
590           not store the generated config to a file. Instead it returns it as
591           a string, which you can save yourself afterwards.
592
593           It takes one optional parameter, which must be a reference to a
594           hash structure.  If you omit this parameter, the internal config
595           hash, which has already been parsed, will be used.
596
597           Example:
598
599            my $content = $conf_obj->save_string(\%config);
600
601           or:
602
603            my $content = $conf_obj->save_string();
604

CONFIG FILE FORMAT

606       Lines beginning with # and empty lines will be ignored. (see section
607       COMMENTS!)  Spaces at the beginning and the end of a line will also be
608       ignored as well as tabulators.  If you need spaces at the end or the
609       beginning of a value you can surround it with double quotes.  An option
610       line starts with its name followed by a value. An equal sign is
611       optional.  Some possible examples:
612
613        user    max
614        user  = max
615        user            max
616
617       If there are more than one statements with the same name, it will
618       create an array instead of a scalar. See the example below.
619
620       The method getall returns a hash of all values.
621

BLOCKS

623       You can define a block of options. A block looks much like a block in
624       the wellknown Apache config format. It starts with <blockname> and ends
625       with </blockname>.
626
627       A block start and end cannot be on the same line.
628
629       An example:
630
631        <database>
632         host   = muli
633         user   = moare
634         dbname = modb
635         dbpass = D4r_9Iu
636        </database>
637
638       Blocks can also be nested. Here is a more complicated example:
639
640        user   = hans
641        server = mc200
642        db     = maxis
643        passwd = D3rf$
644        <jonas>
645         user    = tom
646         db      = unknown
647         host    = mila
648         <tablestructure>
649          index   int(100000)
650          name    char(100)
651          prename char(100)
652          city    char(100)
653          status  int(10)
654          allowed moses
655          allowed ingram
656          allowed joice
657         </tablestructure>
658        </jonas>
659
660       The hash which the method getall returns look like that:
661
662         print Data::Dumper(\%hash);
663         $VAR1 = {
664                  'passwd' => 'D3rf$',
665                  'jonas'  => {
666                               'tablestructure' => {
667                                                    'prename' => 'char(100)',
668                                                    'index'   => 'int(100000)',
669                                                    'city'    => 'char(100)',
670                                                    'name'    => 'char(100)',
671                                                    'status'  => 'int(10)',
672                                                    'allowed' => [
673                                                                  'moses',
674                                                                  'ingram',
675                                                                  'joice',
676                                                                 ]
677                                                   },
678                               'host'           => 'mila',
679                               'db'             => 'unknown',
680                               'user'           => 'tom'
681                              },
682                  'db'     => 'maxis',
683                  'server' => 'mc200',
684                  'user'   => 'hans'
685                 };
686
687       If you have turned on -LowerCaseNames (see new()) then blocks as in the
688       following example:
689
690        <Dir>
691         <AttriBUTES>
692          Owner  root
693         </attributes>
694        </dir>
695
696       would produce the following hash structure:
697
698         $VAR1 = {
699                  'dir' => {
700                            'attributes' => {
701                                             'owner'  => "root",
702                                            }
703                           }
704                 };
705
706       As you can see, the keys inside the config hash are normalized.
707
708       Please note, that the above config block would result in a valid hash
709       structure, even if -LowerCaseNames is not set!  This is because
710       Config::General does not use the block names to check if a block ends,
711       instead it uses an internal state counter, which indicates a block end.
712
713       If the module cannot find an end-block statement, then this block will
714       be ignored.
715

NAMED BLOCKS

717       If you need multiple blocks of the same name, then you have to name
718       every block.  This works much like Apache config. If the module finds a
719       named block, it will create a hashref with the left part of the named
720       block as the key containing one or more hashrefs with the right part of
721       the block as key containing everything inside the block(which may again
722       be nested!). As examples says more than words:
723
724       # given the following sample
725        <Directory /usr/frisco>
726         Limit Deny
727         Options ExecCgi Index
728        </Directory>
729        <Directory /usr/frik>
730         Limit DenyAll
731         Options None
732        </Directory>
733
734       # you will get:
735
736         $VAR1 = {
737                  'Directory' => {
738                                  '/usr/frik' => {
739                                                  'Options' => 'None',
740                                                  'Limit' => 'DenyAll'
741                                                 },
742                                  '/usr/frisco' => {
743                                                    'Options' => 'ExecCgi Index',
744                                                    'Limit' => 'Deny'
745                                                   }
746                                 }
747                 };
748
749       You cannot have more than one named block with the same name because it
750       will be stored in a hashref and therefore be overwritten if a block
751       occurs once more.
752

WHITESPACE IN BLOCKS

754       The normal behavior of Config::General is to look for whitespace in
755       block names to decide if it's a named block or just a simple block.
756
757       Sometimes you may need blocknames which have whitespace in their names.
758
759       With named blocks this is no problem, as the module only looks for the
760       first whitespace:
761
762        <person hugo gera>
763        </person>
764
765       would be parsed to:
766
767         $VAR1 = {
768                  'person' => {
769                               'hugo gera' => {
770                                              },
771                              }
772                 };
773
774       The problem occurs, if you want to have a simple block containing
775       whitespace:
776
777        <hugo gera>
778        </hugo gera>
779
780       This would be parsed as a named block, which is not what you wanted. In
781       this very case you may use quotation marks to indicate that it is not a
782       named block:
783
784        <"hugo gera">
785        </"hugo gera">
786
787       The save() method of the module inserts automatically quotation marks
788       in such cases.
789

EXPLICIT EMPTY BLOCKS

791       Beside the notation of blocks mentioned above it is possible to use
792       explicit empty blocks.
793
794       Normally you would write this in your config to define an empty block:
795
796        <driver Apache>
797        </driver>
798
799       To save writing you can also write:
800
801        <driver Apache/>
802
803       which is the very same as above. This works for normal blocks and for
804       named blocks.
805

IDENTICAL OPTIONS (ARRAYS)

807       You may have more than one line of the same option with different
808       values.  Example:
809
810        log  log1
811        log  log2
812        log  log2
813
814       You will get a scalar if the option occurred only once or an array if
815       it occurred more than once. If you expect multiple identical options,
816       then you may need to check if an option occurred more than once:
817
818         $allowed = $hash{jonas}->{tablestructure}->{allowed};
819         if (ref($allowed) eq "ARRAY") {
820           @ALLOWED = @{$allowed};
821           else {
822             @ALLOWED = ($allowed);
823           }
824         }
825
826       The same applies to blocks and named blocks too (they are described in
827       more detail below). For example, if you have the following config:
828
829        <dir blah>
830         user max
831        </dir>
832        <dir blah>
833         user hannes
834        </dir>
835
836       then you would end up with a data structure like this:
837
838         $VAR1 = {
839                  'dir' => {
840                            'blah' => [
841                                       {
842                                        'user' => 'max'
843                                       },
844                                       {
845                                        'user' => 'hannes'
846                                       }
847                                      ]
848                           }
849                 };
850
851       As you can see, the two identical blocks are stored in a hash which
852       contains an array(-reference) of hashes.
853
854       Under some rare conditions you might not want this behavior with blocks
855       (and named blocks too). If you want to get one single hash with the
856       contents of both identical blocks, then you need to turn the new()
857       parameter -MergeDuplicateBlocks on (see above). The parsed structure of
858       the example above would then look like this:
859
860         $VAR1 = {
861                  'dir' => {
862                            'blah' => {
863                                       'user' => [
864                                                  'max',
865                                                  'hannes'
866                                                 ]
867                                      }
868                           }
869                 };
870
871       As you can see, there is only one hash "dir->{blah}" containing
872       multiple "user" entries. As you can also see, turning on
873       -MergeDuplicateBlocks does not affect scalar options (i.e. "option =
874       value"). In fact you can tune merging of duplicate blocks and options
875       independent from each other.
876
877       If you don't want to allow more than one identical options, you may
878       turn it off by setting the flag AllowMultiOptions in the new() method
879       to "no".  If turned off, Config::General will complain about multiple
880       occurring options with identical names!
881
882   FORCE SINGLE VALUE ARRAYS
883       You may also force a single config line to get parsed into an array by
884       turning on the option -ForceArray and by surrounding the value of the
885       config entry by []. Example:
886
887        hostlist = [ foo.bar ]
888
889       Will be a singlevalue array entry if the option is turned on. If you
890       want it to remain to be an array you have to turn on -ForceArray during
891       save too.
892

LONG LINES

894       If you have a config value, which is too long and would take more than
895       one line, you can break it into multiple lines by using the backslash
896       character at the end of the line. The Config::General module will
897       concatenate those lines to one single-value.
898
899       Example:
900
901        command = cat /var/log/secure/tripwire | \
902        mail C<-s> "report from tripwire" \
903        honey@myotherhost.nl
904
905       command will become: "cat /var/log/secure/tripwire | mail "-s" 'report
906       from twire' honey@myotherhost.nl"
907

HERE DOCUMENTS

909       You can also define a config value as a so called "here-document". You
910       must tell the module an identifier which indicates the end of a here
911       document. An identifier must follow a "<<".
912
913       Example:
914
915        message <<EOF
916         we want to
917         remove the
918         homedir of
919         root.
920        EOF
921
922       Everything between the two "EOF" strings will be in the option message.
923
924       There is a special feature which allows you to use indentation with
925       here documents.  You can have any amount of whitespace or tabulators in
926       front of the end identifier. If the module finds spaces or tabs then it
927       will remove exactly those amount of spaces from every line inside the
928       here-document.
929
930       Example:
931
932        message <<EOF
933           we want to
934           remove the
935           homedir of
936           root.
937           EOF
938
939       After parsing, message will become:
940
941        we want to
942        remove the
943        homedir of
944        root.
945
946       because there were the string "     " in front of EOF, which were cut
947       from every line inside the here-document.
948

INCLUDES

950       You can include an external file at any position in your config file
951       using the following statement in your config file:
952
953        <<include externalconfig.rc>>
954
955       If you turned on -UseApacheInclude (see new()), then you can also use
956       the following statement to include an external file:
957
958        include externalconfig.rc
959
960       This file will be inserted at the position where it was found as if the
961       contents of this file were directly at this position.
962
963       You can also recursively include files, so an included file may include
964       another one and so on.  Beware that you do not recursively load the
965       same file, you will end with an error message like "too many open files
966       in system!".
967
968       By default included files with a relative pathname will be opened from
969       within the current working directory. Under some circumstances it maybe
970       possible to open included files from the directory, where the
971       configfile resides. You need to turn on the option -IncludeRelative
972       (see new()) if you want that. An example:
973
974        my $conf = Config::General(
975         -ConfigFile => "/etc/crypt.d/server.cfg"
976         -IncludeRelative => 1
977        );
978
979       /etc/crypt.d/server.cfg:
980
981        <<include acl.cfg>>
982
983       In this example Config::General will try to include acl.cfg from
984       /etc/crypt.d:
985
986        /etc/crypt.d/acl.cfg
987
988       The default behavior (if -IncludeRelative is not set!) will be to open
989       just acl.cfg, wherever it is, i.e. if you did a
990       chdir("/usr/local/etc"), then Config::General will include:
991
992        /usr/local/etc/acl.cfg
993
994       Include statements can be case insensitive (added in version 1.25).
995
996       Include statements will be ignored within C-Comments and here-
997       documents.
998
999       By default, a config file will only be included the first time it is
1000       referenced.  If you wish to include a file in multiple places, set
1001       /-IncludeAgain to true. But be warned: this may lead to infinite loops,
1002       so make sure, you're not including the same file from within itself!
1003
1004       Example:
1005
1006        # main.cfg
1007        <object billy>
1008         class=Some::Class
1009        <printers>
1010         include printers.cfg
1011        </printers>
1012        # ...
1013        </object>
1014         <object bob>
1015          class=Another::Class
1016         <printers>
1017         include printers.cfg
1018         </printers>
1019         # ...
1020        </object>
1021
1022       Now "printers.cfg" will be include in both the "billy" and "bob"
1023       objects.
1024
1025       You will have to be careful to not recursively include a file.
1026       Behaviour in this case is undefined.
1027

COMMENTS

1029       A comment starts with the number sign #, there can be any number of
1030       spaces and/or tab stops in front of the #.
1031
1032       A comment can also occur after a config statement. Example:
1033
1034        username = max  # this is the comment
1035
1036       If you want to comment out a large block you can use C-style comments.
1037       A /* signals the begin of a comment block and the */ signals the end of
1038       the comment block.  Example:
1039
1040        user  = max # valid option
1041        db    = tothemax
1042        /*
1043        user  = andors
1044        db    = toand
1045        */
1046
1047       In this example the second options of user and db will be ignored.
1048       Please beware of the fact, if the Module finds a /* string which is the
1049       start of a comment block, but no matching end block, it will ignore the
1050       whole rest of the config file!
1051
1052       NOTE: If you require the # character (number sign) to remain in the
1053       option value, then you can use a backslash in front of it, to escape
1054       it. Example:
1055
1056        bgcolor = \#ffffcc
1057
1058       In this example the value of $config{bgcolor} will be "#ffffcc",
1059       Config::General will not treat the number sign as the begin of a
1060       comment because of the leading backslash.
1061
1062       Inside here-documents escaping of number signs is NOT required!
1063

PARSER PLUGINS

1065       You can alter the behavior of the parser by supplying closures which
1066       will be called on certain hooks during config file processing and
1067       parsing.
1068
1069       The general aproach works like this:
1070
1071         sub ck {
1072           my($file, $base) = @_;
1073           print "_open() tries $file ... ";
1074           if ($file =~ /blah/) {
1075             print "ignored\n";
1076             return (0);
1077           } else {
1078             print "allowed\n";
1079             return (1, @_);
1080           }
1081         }
1082
1083         my %c = ParseConfig(
1084                             -IncludeGlob      => 1,
1085                             -UseApacheInclude => 1,
1086                             -ConfigFile       => shift,
1087                             -Plug             => { pre_open => *ck }
1088                            );
1089
1090       Output:
1091
1092        _open() tries cfg ... allowed
1093        _open() tries x/*.conf ... allowed
1094        _open() tries x/1.conf ... allowed
1095        _open() tries x/2.conf ... allowed
1096        _open() tries x/blah.conf ... ignored
1097
1098       As you can see, we wrote a little sub which takes a filename and a base
1099       directory as parameters. We tell Config::General via the Plug parameter
1100       of new() to call this sub everytime before it attempts to open a file.
1101
1102       General processing continues as usual if the first value of the
1103       returned array is true. The second value of that array depends on the
1104       kind of hook being called.
1105
1106       The following hooks are available so far:
1107
1108       pre_open
1109           Takes two parameters: filename and basedirectory.
1110
1111           Has to return an array consisting of 3 values:
1112
1113            - 1 or 0 (continue processing or not)
1114            - filename
1115            - base directory
1116
1117       pre_read
1118           Takes two parameters: the filehandle of the file to be read and an
1119           array containing the raw contents of said file.
1120
1121           This hook will be applied in _read(). File contents are already
1122           available at this stage, comments will be removed, here-docs
1123           normalized and the like. This hook gets the unaltered, original
1124           contents.
1125
1126           Has to return an array of 3 values:
1127
1128            - 1 or 0 (continue processing or not)
1129            - the filehandle
1130            - an array of strings
1131
1132           You can use this hook to apply your own normalizations or whatever.
1133
1134           Be careful when returning the abort value (1st value of returned
1135           array 0), since in this case nothing else would be done on the
1136           contents. If it still contains comments or something, they will be
1137           parsed as legal config options.
1138
1139       post_read
1140           Takes one parameter: a reference to an array containing the
1141           prepared config lines (after being processed by _read()).
1142
1143           This hook will be applied in _read() when everything else has been
1144           done.
1145
1146           Has to return an array of 2 values:
1147
1148            - 1 or 0 (continue processing or not) [Ignored for post hooks]
1149            - a reference to an array containing the config lines
1150
1151       pre_parse_value
1152           Takes 2 parameters: an option name and its value.
1153
1154           This hook will be applied in _parse_value() before any processing.
1155
1156           Has to return an array of 3 values:
1157
1158            - 1 or 0 (continue processing or not)
1159            - option name
1160            - value of the option
1161
1162       post_parse_value
1163           Almost identical to pre_parse_value, but will be applied after
1164           _parse_value() is finished and all usual processing and
1165           normalization is done.
1166
1167       Not implemented yet: hooks for variable interpolation and block
1168       parsing.
1169

OBJECT ORIENTED INTERFACE

1171       There is a way to access a parsed config the OO-way.  Use the module
1172       Config::General::Extended, which is supplied with the Config::General
1173       distribution.
1174

VARIABLE INTERPOLATION

1176       You can use variables inside your config files if you like. To do that
1177       you have to use the module Config::General::Interpolated, which is
1178       supplied with the Config::General distribution.
1179

EXPORTED FUNCTIONS

1181       Config::General exports some functions too, which makes it somewhat
1182       easier to use it, if you like this.
1183
1184       How to import the functions:
1185
1186        use Config::General qw(ParseConfig SaveConfig SaveConfigString);
1187
1188       ParseConfig()
1189           This function takes exactly all those parameters, which are allowed
1190           to the new() method of the standard interface.
1191
1192           Example:
1193
1194            use Config::General qw(ParseConfig);
1195            my %config = ParseConfig(-ConfigFile => "rcfile", -AutoTrue => 1);
1196
1197       SaveConfig()
1198           This function requires two arguments, a filename and a reference to
1199           a hash structure.
1200
1201           Example:
1202
1203            use Config::General qw(SaveConfig);
1204            ..
1205            SaveConfig("rcfile", \%some_hash);
1206
1207       SaveConfigString()
1208           This function requires a reference to a config hash as parameter.
1209           It generates a configuration based on this hash as the object-
1210           interface method save_string() does.
1211
1212           Example:
1213
1214            use Config::General qw(ParseConfig SaveConfigString);
1215            my %config = ParseConfig(-ConfigFile => "rcfile");
1216            .. # change %config something
1217            my $content = SaveConfigString(\%config);
1218

CONFIGURATION AND ENVIRONMENT

1220       No environment variables will be used.
1221

SEE ALSO

1223       I recommend you to read the following documents, which are supplied
1224       with Perl:
1225
1226        perlreftut                     Perl references short introduction
1227        perlref                        Perl references, the rest of the story
1228        perldsc                        Perl data structures intro
1229        perllol                        Perl data structures: arrays of arrays
1230
1231        Config::General::Extended      Object oriented interface to parsed configs
1232        Config::General::Interpolated  Allows one to use variables inside config files
1233
1235       Copyright (c) 2000-2016 Thomas Linden
1236
1237       This library is free software; you can redistribute it and/or modify it
1238       under the same terms as Perl itself.
1239

BUGS AND LIMITATIONS

1241       See rt.cpan.org for current bugs, if any.
1242

INCOMPATIBILITIES

1244       None known.
1245

DIAGNOSTICS

1247       To debug Config::General use the Perl debugger, see perldebug.
1248

DEPENDENCIES

1250       Config::General depends on the modules FileHandle,
1251       File::Spec::Functions, File::Glob, which all are shipped with Perl.
1252

AUTHOR

1254       Thomas Linden <tlinden |AT| cpan.org>
1255

VERSION

1257       2.63
1258
1259
1260
1261perl v5.34.0                      2021-05-21                        General(3)
Impressum