1Text::Reform(3)       User Contributed Perl Documentation      Text::Reform(3)
2
3
4

NAME

6       Text::Reform - Manual text wrapping and reformatting
7

VERSION

9       This document describes version 1.20 of Text::Reform, released
10       2009-09-06.
11

SYNOPSIS

13               use Text::Reform;
14
15               print form $template,
16                          $data, $to, $fill, $it, $with;
17
18
19               use Text::Reform qw( tag );
20
21               print tag 'B', $enboldened_text;
22

DESCRIPTION

24   The "form" sub
25       The "form()" subroutine may be exported from the module.  It takes a
26       series of format (or "picture") strings followed by replacement values,
27       interpolates those values into each picture string, and returns the
28       result. The effect is similar to the inbuilt perl "format" mechanism,
29       although the field specification syntax is simpler and some of the
30       formatting behaviour is more sophisticated.
31
32       A picture string consists of sequences of the following characters:
33
34       <       Left-justified field indicator.  A series of two or more
35               sequential <'s specify a left-justified field to be filled by a
36               subsequent value.  A single < is formatted as the literal
37               character '<'
38
39       >       Right-justified field indicator.  A series of two or more
40               sequential >'s specify a right-justified field to be filled by
41               a subsequent value.  A single > is formatted as the literal
42               character '>'
43
44       <<<>>>  Fully-justified field indicator.  Field may be of any width,
45               and brackets need not balance, but there must be at least 2 '<'
46               and 2 '>'.
47
48       ^       Centre-justified field indicator.  A series of two or more
49               sequential ^'s specify a centred field to be filled by a
50               subsequent value.  A single ^ is formatted as the literal
51               character '^'
52
53       >>>.<<<<
54               A numerically formatted field with the specified number of
55               digits to either side of the decimal place. See "Numerical
56               formatting" below.
57
58       [       Left-justified block field indicator.  Just like a < field,
59               except it repeats as required on subsequent lines. See below.
60               A single [ is formatted as the literal character '['
61
62       ]       Right-justified block field indicator.  Just like a > field,
63               except it repeats as required on subsequent lines. See below.
64               A single ] is formatted as the literal character ']'
65
66       [[[]]]  Fully-justified block field indicator.  Just like a <<<>>>
67               field, except it repeats as required on subsequent lines. See
68               below.  Field may be of any width, and brackets need not
69               balance, but there must be at least 2 '[' and 2 ']'.
70
71       |       Centre-justified block field indicator.  Just like a ^ field,
72               except it repeats as required on subsequent lines. See below.
73               A single | is formatted as the literal character '|'
74
75       ]]].[[[[
76               A numerically formatted block field with the specified number
77               of digits to either side of the decimal place.  Just like a
78               >>>.<<<< field, except it repeats as required on subsequent
79               lines. See below.
80
81       ~       A one-character wide block field.
82
83       \       Literal escape of next character (e.g. "\~" is formatted as
84               '~', not a one character wide block field).
85
86       Any other character
87               That literal character.
88
89       Any substitution value which is "undef" (either explicitly so, or
90       because it is missing) is replaced by an empty string.
91
92   Controlling line filling.
93       Note that, unlike the a perl "format", "form" preserves whitespace
94       (including newlines) unless called with certain options.
95
96       The "squeeze" option (when specified with a true value) causes any
97       sequence of spaces and/or tabs (but not newlines) in an interpolated
98       string to be replaced with a single space.
99
100       A true value for the "fill" option causes (only) newlines to be
101       squeezed.
102
103       To minimize all whitespace, you need to specify both options. Hence:
104
105               $format = "EG> [[[[[[[[[[[[[[[[[[[[[";
106               $data   = "h  e\t l lo\nworld\t\t\t\t\t";
107
108               print form $format, $data;              # all whitespace preserved:
109                                                       #
110                                                       # EG> h  e            l lo
111                                                       # EG> world
112
113
114               print form {squeeze=>1},                # only newlines preserved:
115                          $format, $data;              #
116                                                       # EG> h e l lo
117                                                       # EG> world
118
119
120               print form {fill=>1},                   # only spaces/tabs preserved:
121                           $format, $data;             #
122                                                       # EG> h  e        l lo world
123
124
125               print form {squeeze=>1, fill=>1},       # no whitespace preserved:
126                          $format, $data;              #
127                                                       # EG> h e l lo world
128
129       Whether or not filling or squeezing is in effect, "form" can also be
130       directed to trim any extra whitespace from the end of each line it
131       formats, using the "trim" option. If this option is specified with a
132       true value, every line returned by "form" will automatically have the
133       substitution "s/[ \t]+$//gm" applied to it.
134
135       Hence:
136
137               print length form "[[[[[[[[[[", "short";
138               # 11
139
140               print length form {trim=>1}, "[[[[[[[[[[", "short";
141               # 6
142
143       It is also possible to control the character used to fill lines that
144       are too short, using the 'filler' option. If this option is specified
145       the value of the 'filler' flag is used as the fill string, rather than
146       the default " ".
147
148       For example:
149
150               print form { filler=>'*' },
151                       "Pay bearer: ^^^^^^^^^^^^^^^^^^^",
152                       '$123.45';
153
154       prints:
155
156               Pay bearer: ******$123.45******
157
158       If the filler string is longer than one character, it is truncated to
159       the appropriate length. So:
160
161               print form { filler=>'-->' },
162                       "Pay bearer: ]]]]]]]]]]]]]]]]]]]",
163                       ['$1234.50', '$123.45', '$12.34'];
164
165       prints:
166
167               Pay bearer: ->-->-->-->$1234.50
168               Pay bearer: -->-->-->-->$123.45
169               Pay bearer: >-->-->-->-->$12.34
170
171       If the value of the 'filler' option is a hash, then it's 'left' and
172       'right' entries specify separate filler strings for each side of an
173       interpolated value. So:
174
175               print form { filler=>{left=>'->', right=>'*'} },
176                       "Pay bearer: <<<<<<<<<<<<<<<<<<",
177                       '$123.45',
178                       "Pay bearer: >>>>>>>>>>>>>>>>>>",
179                       '$123.45',
180                       "Pay bearer: ^^^^^^^^^^^^^^^^^^",
181                       '$123.45';
182
183       prints:
184
185               Pay bearer: $123.45***********
186               Pay bearer: >->->->->->$123.45
187               Pay bearer: >->->$123.45******
188
189   Temporary and permanent default options
190       If "form" is called with options, but no template string or data, it
191       resets it's defaults to the options specified. If called in a void
192       context:
193
194               form { squeeze => 1, trim => 1 };
195
196       the options become permanent defaults.
197
198       However, when called with only options in non-void context, "form"
199       resets its defaults to those options and returns an object. The reset
200       default values persist only until that returned object is destroyed.
201       Hence to temporarily reset "form"'s defaults within a single
202       subroutine:
203
204               sub single {
205                       my $tmp = form { squeeze => 1, trim => 1 };
206
207                       # do formatting with the obove defaults
208
209               } # form's defaults revert to previous values as $tmp object destroyed
210
211   Multi-line format specifiers and interleaving
212       By default, if a format specifier contains two or more lines (i.e. one
213       or more newline characters), the entire format specifier is repeatedly
214       filled as a unit, until all block fields have consumed their
215       corresponding arguments. For example, to build a simple look-up table:
216
217               my @values   = (1..12);
218
219               my @squares  = map { sprintf "%.6g", $_**2    } @values;
220               my @roots    = map { sprintf "%.6g", sqrt($_) } @values;
221               my @logs     = map { sprintf "%.6g", log($_)  } @values;
222               my @inverses = map { sprintf "%.6g", 1/$_     } @values;
223
224               print form
225               "  N      N**2    sqrt(N)      log(N)      1/N",
226               "=====================================================",
227               "| [[  |  [[[  |  [[[[[[[[[[ | [[[[[[[[[ | [[[[[[[[[ |
228               -----------------------------------------------------",
229               \@values, \@squares, \@roots, \@logs, \@inverses;
230
231       The multiline format specifier:
232
233               "| [[  |  [[[  |  [[[[[[[[[[ | [[[[[[[[[ | [[[[[[[[[ |
234               -----------------------------------------------------",
235
236       is treated as a single logical line. So "form" alternately fills the
237       first physical line (interpolating one value from each of the arrays)
238       and the second physical line (which puts a line of dashes between each
239       row of the table) producing:
240
241                 N      N**2    sqrt(N)      log(N)      1/N
242               =====================================================
243               | 1   |  1    |  1          | 0         | 1         |
244               -----------------------------------------------------
245               | 2   |  4    |  1.41421    | 0.693147  | 0.5       |
246               -----------------------------------------------------
247               | 3   |  9    |  1.73205    | 1.09861   | 0.333333  |
248               -----------------------------------------------------
249               | 4   |  16   |  2          | 1.38629   | 0.25      |
250               -----------------------------------------------------
251               | 5   |  25   |  2.23607    | 1.60944   | 0.2       |
252               -----------------------------------------------------
253               | 6   |  36   |  2.44949    | 1.79176   | 0.166667  |
254               -----------------------------------------------------
255               | 7   |  49   |  2.64575    | 1.94591   | 0.142857  |
256               -----------------------------------------------------
257               | 8   |  64   |  2.82843    | 2.07944   | 0.125     |
258               -----------------------------------------------------
259               | 9   |  81   |  3          | 2.19722   | 0.111111  |
260               -----------------------------------------------------
261               | 10  |  100  |  3.16228    | 2.30259   | 0.1       |
262               -----------------------------------------------------
263               | 11  |  121  |  3.31662    | 2.3979    | 0.0909091 |
264               -----------------------------------------------------
265               | 12  |  144  |  3.4641     | 2.48491   | 0.0833333 |
266               -----------------------------------------------------
267
268       This implies that formats and the variables from which they're filled
269       need to be interleaved. That is, a multi-line specification like this:
270
271               print form
272               "Passed:                      ##
273                  [[[[[[[[[[[[[[[             # single format specification
274               Failed:                        # (needs two sets of data)
275                  [[[[[[[[[[[[[[[",          ##
276
277               \@passes, \@fails;            ##  data for previous format
278
279       would print:
280
281               Passed:
282                  <pass 1>
283               Failed:
284                  <fail 1>
285               Passed:
286                  <pass 2>
287               Failed:
288                  <fail 2>
289               Passed:
290                  <pass 3>
291               Failed:
292                  <fail 3>
293
294       because the four-line format specifier is treated as a single unit, to
295       be repeatedly filled until all the data in @passes and @fails has been
296       consumed.
297
298       Unlike the table example, where this unit filling correctly put a line
299       of dashes between lines of data, in this case the alternation of passes
300       and fails is probably not the desired effect.
301
302       Judging by the labels, it is far more likely that the user wanted:
303
304               Passed:
305                  <pass 1>
306                  <pass 2>
307                  <pass 3>
308               Failed:
309                  <fail 4>
310                  <fail 5>
311                  <fail 6>
312
313       To achieve that, either explicitly interleave the formats and their
314       data sources:
315
316               print form
317               "Passed:",               ## single format (no data required)
318               "   [[[[[[[[[[[[[[[",    ## single format (needs one set of data)
319                   \@passes,            ## data for previous format
320               "Failed:",               ## single format (no data required)
321               "   [[[[[[[[[[[[[[[",    ## single format (needs one set of data)
322                   \@fails;             ## data for previous format
323
324       or instruct "form" to do it for you automagically, by setting the
325       'interleave' flag true:
326
327               print form {interleave=>1}
328               "Passed:                 ##
329                  [[[[[[[[[[[[[[[        # single format
330               Failed:                   # (needs two sets of data)
331                  [[[[[[[[[[[[[[[",     ##
332
333                                        ## data to be automagically interleaved
334               \@passes, \@fails;        # as necessary between lines of previous
335                                        ## format
336
337   How "form" hyphenates
338       Any line with a block field repeats on subsequent lines until all block
339       fields on that line have consumed all their data. Non-block fields on
340       these lines are replaced by the appropriate number of spaces.
341
342       Words are wrapped whole, unless they will not fit into the field at
343       all, in which case they are broken and (by default) hyphenated. Simple
344       hyphenation is used (i.e. break at the N-1th character and insert a
345       '-'), unless a suitable alternative subroutine is specified instead.
346
347       Words will not be broken if the break would leave less than 2
348       characters on the current line. This minimum can be varied by setting
349       the 'minbreak' option to a numeric value indicating the minumum total
350       broken characters (including hyphens) required on the current line.
351       Note that, for very narrow fields, words will still be broken (but
352       unhyphenated). For example:
353
354               print form '~', 'split';
355
356       would print:
357
358               s
359               p
360               l
361               i
362               t
363
364       whilst:
365
366               print form {minbreak=>1}, '~', 'split';
367
368       would print:
369
370               s-
371               p-
372               l-
373               i-
374               t
375
376       Alternative breaking subroutines can be specified using the "break"
377       option in a configuration hash. For example:
378
379               form { break => \&my_line_breaker }
380                    $format_str,
381                    @data;
382
383       "form" expects any user-defined line-breaking subroutine to take three
384       arguments (the string to be broken, the maximum permissible length of
385       the initial section, and the total width of the field being filled).
386       The "hypenate" sub must return a list of two strings: the initial
387       (broken) section of the word, and the remainder of the string
388       respectively).
389
390       For example:
391
392               sub tilde_break = sub($$$)
393               {
394                       (substr($_[0],0,$_[1]-1).'~', substr($_[0],$_[1]-1));
395               }
396
397               form { break => \&tilde_break }
398                    $format_str,
399                    @data;
400
401       makes '~' the hyphenation character, whilst:
402
403               sub wrap_and_slop = sub($$$)
404               {
405                       my ($text, $reqlen, $fldlen) = @_;
406                       if ($reqlen==$fldlen) { $text =~ m/\A(\s*\S*)(.*)/s }
407                       else                  { ("", $text) }
408               }
409
410               form { break => \&wrap_and_slop }
411                    $format_str,
412                    @data;
413
414       wraps excessively long words to the next line and "slops" them over the
415       right margin if necessary.
416
417       The Text::Reform package provides three functions to simplify the use
418       of variant hyphenation schemes. The exportable subroutine
419       "Text::Reform::break_wrap" generates a reference to a subroutine
420       implementing the "wrap-and-slop" algorithm shown in the last example,
421       which could therefore be rewritten:
422
423               use Text::Reform qw( form break_wrap );
424
425               form { break => break_wrap }
426                    $format_str,
427                    @data;
428
429       The subroutine "Text::Reform::break_with" takes a single string
430       argument and returns a reference to a sub which hyphenates by cutting
431       off the text at the right margin and appending the string argument.
432       Hence the first of the two examples could be rewritten:
433
434               use Text::Reform qw( form break_with );
435
436               form { break => break_with('~') }
437                    $format_str,
438                    @data;
439
440       The subroutine "Text::Reform::break_at" takes a single string argument
441       and returns a reference to a sub which hyphenates by breaking
442       immediately after that string. For example:
443
444               use Text::Reform qw( form break_at );
445
446               form { break => break_at('-') }
447                      "[[[[[[[[[[[[[[",
448                      "The Newton-Raphson methodology";
449
450               # returns:
451               #
452               #       "The Newton-
453               #        Raphson
454               #        methodology"
455
456       Note that this differs from the behaviour of "break_with", which would
457       be:
458
459               form { break => break_with('-') }
460                      "[[[[[[[[[[[[[[",
461                      "The Newton-Raphson methodology";
462
463               # returns:
464               #
465               #       "The Newton-R-
466               #        aphson metho-
467               #        dology"
468
469       Hence "break_at" is generally a better choice.
470
471       "break_at" also takes an 'except' option, which tells the resulting
472       subroutine not to break in the middle of certain strings. For example:
473
474               form { break => break_at('-', {except=>qr/Newton-Raphson/}) }
475                      "[[[[[[[[[[[[[[",
476                      "The Newton-Raphson methodology";
477
478               # returns:
479               #
480               #       "The
481           #        Newton-Raphson
482               #        methodology"
483
484       This option is particularly useful for preserving URLs.
485
486       The subroutine "Text::Reform::break_TeX" returns a reference to a sub
487       which hyphenates using Jan Pazdziora's TeX::Hyphen module. For example:
488
489               use Text::Reform qw( form break_wrap );
490
491               form { break => break_TeX }
492                    $format_str,
493                    @data;
494
495       Note that in the previous examples there is no leading '\&' before
496       "break_wrap", "break_with", or "break_TeX", since each is being
497       directly called (and returns a reference to some other suitable
498       subroutine);
499
500   The "form" formatting algorithm
501       The algorithm "form" uses is:
502
503               1. If interleaving is specified, split the first string in the
504                  argument list into individual format lines and add a
505                  terminating newline (unless one is already present).
506                  Otherwise, treat the entire string as a single "line" (like
507                  /s does in regexes)
508
509               2. For each format line...
510
511                       2.1. determine the number of fields and shift
512                            that many values off the argument list and
513                            into the filling list. If insufficient
514                            arguments are available, generate as many
515                            empty strings as are required.
516
517                       2.2. generate a text line by filling each field
518                            in the format line with the initial contents
519                            of the corresponding arg in the filling list
520                            (and remove those initial contents from the arg).
521
522                       2.3. replace any <,>, or ^ fields by an equivalent
523                            number of spaces. Splice out the corresponding
524                            args from the filling list.
525
526                       2.4. Repeat from step 2.2 until all args in the
527                            filling list are empty.
528
529               3. concatenate the text lines generated in step 2
530
531               4. repeat from step 1 until the argument list is empty
532
533   "form" examples
534       As an example of the use of "form", the following:
535
536               $count = 1;
537               $text = "A big long piece of text to be formatted exquisitely";
538
539               print form q
540               q{       ||||  <<<<<<<<<<   },
541               $count, $text,
542               q{       ----------------   },
543               q{       ^^^^  ]]]]]]]]]]|  },
544               $count+11, $text,
545               q{                       =
546                        ]]].[[[            },
547               "123 123.4\n123.456789";
548
549       produces the following output:
550
551                        1    A big long
552                       ----------------
553                        12     piece of|
554                             text to be|
555                              formatted|
556                             exquisite-|
557                                     ly|
558                                       =
559                       123.0
560                                       =
561                       123.4
562                                       =
563                       123.456
564
565       Note that block fields in a multi-line format string, cause the entire
566       multi-line format to be repeated as often as necessary.
567
568       Picture strings and replacement values are interleaved in the
569       traditional "format" format, but care is needed to ensure that the
570       correct number of substitution values are provided. Another example:
571
572               $report = form
573                       'Name           Rank    Serial Number',
574                       '====           ====    =============',
575                       '<<<<<<<<<<<<<  ^^^^    <<<<<<<<<<<<<',
576                        $name,         $rank,  $serial_number,
577                       ''
578                       'Age    Sex     Description',
579                       '===    ===     ===========',
580                       '^^^    ^^^     [[[[[[[[[[[',
581                        $age,  $sex,   $description;
582
583   How "form" consumes strings
584       Unlike "format", within "form" non-block fields do consume the text
585       they format, so the following:
586
587               $text = "a line of text to be formatted over three lines";
588               print form "<<<<<<<<<<\n  <<<<<<<<\n    <<<<<<\n",
589                           $text,        $text,        $text;
590
591       produces:
592
593               a line of
594                 text to
595                   be fo-
596
597       not:
598
599               a line of
600                 a line
601                   a line
602
603       To achieve the latter effect, convert the variable arguments to
604       independent literals (by double-quoted interpolation):
605
606               $text = "a line of text to be formatted over three lines";
607               print form "<<<<<<<<<<\n  <<<<<<<<\n    <<<<<<\n",
608                          "$text",      "$text",      "$text";
609
610       Although values passed from variable arguments are progressively
611       consumed within "form", the values of the original variables passed to
612       "form" are not altered.  Hence:
613
614               $text = "a line of text to be formatted over three lines";
615               print form "<<<<<<<<<<\n  <<<<<<<<\n    <<<<<<\n",
616                           $text,        $text,        $text;
617               print $text, "\n";
618
619       will print:
620
621               a line of
622                 text to
623                   be fo-
624               a line of text to be formatted over three lines
625
626       To cause "form" to consume the values of the original variables passed
627       to it, pass them as references. Thus:
628
629               $text = "a line of text to be formatted over three lines";
630               print form "<<<<<<<<<<\n  <<<<<<<<\n    <<<<<<\n",
631                           \$text,       \$text,       \$text;
632               print $text, "\n";
633
634       will print:
635
636               a line of
637                 text to
638                   be fo-
639               rmatted over three lines
640
641       Note that, for safety, the "non-consuming" behaviour takes precedence,
642       so if a variable is passed to "form" both by reference and by value,
643       its final value will be unchanged.
644
645   Numerical formatting
646       The ">>>.<<<" and "]]].[[[" field specifiers may be used to format
647       numeric values about a fixed decimal place marker. For example:
648
649               print form '(]]]]].[[)', <<EONUMS;
650                          1
651                          1.0
652                          1.001
653                          1.009
654                          123.456
655                          1234567
656                          one two
657               EONUMS
658
659       would print:
660
661               (    1.0 )
662               (    1.0 )
663               (    1.00)
664               (    1.01)
665               (  123.46)
666               (#####.##)
667               (?????.??)
668               (?????.??)
669
670       Fractions are rounded to the specified number of places after the
671       decimal, but only significant digits are shown. That's why, in the
672       above example, 1 and 1.0 are formatted as "1.0", whilst 1.001 is
673       formatted as "1.00".
674
675       You can specify that the maximal number of decimal places always be
676       used by giving the configuration option 'numeric' a value that matches
677       /\bAllPlaces\b/i. For example:
678
679               print form { numeric => AllPlaces },
680                          '(]]]]].[[)', <<'EONUMS';
681                          1
682                          1.0
683               EONUMS
684
685       would print:
686
687               (    1.00)
688               (    1.00)
689
690       Note that although decimal digits are rounded to fit the specified
691       width, the integral part of a number is never modified. If there are
692       not enough places before the decimal place to represent the number, the
693       entire number is replaced with hashes.
694
695       If a non-numeric sequence is passed as data for a numeric field, it is
696       formatted as a series of question marks. This querulous behaviour can
697       be changed by giving the configuration option 'numeric' a value that
698       matches /\bSkipNaN\b/i in which case, any invalid numeric data is
699       simply ignored. For example:
700
701               print form { numeric => 'SkipNaN' }
702                          '(]]]]].[[)',
703                          <<EONUMS;
704                          1
705                          two three
706                          4
707               EONUMS
708
709       would print:
710
711               (    1.0 )
712               (    4.0 )
713
714   Filling block fields with lists of values
715       If an argument corresponding to a field is an array reference, then
716       "form" automatically joins the elements of the array into a single
717       string, separating each element with a newline character. As a result,
718       a call like this:
719
720               @values = qw( 1 10 100 1000 );
721               print form "(]]]].[[)", \@values;
722
723       will print out
724
725                (   1.00)
726                (  10.00)
727                ( 100.00)
728                (1000.00)
729
730       as might be expected.
731
732       Note however that arrays must be passed by reference (so that "form"
733       knows that the entire array holds data for a single field). If the
734       previous example had not passed @values by reference:
735
736               @values = qw( 1 10 100 1000 );
737               print form "(]]]].[[)", @values;
738
739       the output would have been:
740
741                (   1.00)
742                10
743                100
744                1000
745
746       This is because @values would have been interpolated into "form"'s
747       argument list, so only $value[0] would have been used as the data for
748       the initial format string. The remaining elements of @value would have
749       been treated as separate format strings, and printed out "verbatim".
750
751       Note too that, because arrays must be passed using a reference, their
752       original contents are consumed by "form", just like the contents of
753       scalars passed by reference.
754
755       To avoid having an array consumed by "form", pass it as an anonymous
756       array:
757
758               print form "(]]]].[[)", [@values];
759
760   Headers, footers, and pages
761       The "form" subroutine can also insert headers, footers, and page-feeds
762       as it formats. These features are controlled by the "header", "footer",
763       "pagefeed", "pagelen", and "pagenum" options.
764
765       The "pagenum" option takes a scalar value or a reference to a scalar
766       variable and starts page numbering at that value. If a reference to a
767       scalar variable is specified, the value of that variable is updated as
768       the formatting proceeds, so that the final page number is available in
769       it after formatting. This can be useful for multi-part reports.
770
771       The "pagelen" option specifies the total number of lines in a page
772       (including headers, footers, and page-feeds).
773
774       The "pagewidth" option specifies the total number of columns in a page.
775
776       If the "header" option is specified with a string value, that string is
777       used as the header of every page generated. If it is specified as a
778       reference to a subroutine, that subroutine is called at the start of
779       every page and its return value used as the header string. When called,
780       the subroutine is passed the current page number.
781
782       Likewise, if the "footer" option is specified with a string value, that
783       string is used as the footer of every page generated. If it is
784       specified as a reference to a subroutine, that subroutine is called at
785       the start of every page and its return value used as the footer string.
786       When called, the footer subroutine is passed the current page number.
787
788       Both the header and footer options can also be specified as hash
789       references.  In this case the hash entries for keys "left", "centre"
790       (or "center"), and "right" specify what is to appear on the left,
791       centre, and right of the header/footer. The entry for the key "width"
792       specifies how wide the footer is to be. If the "width" key is omitted,
793       the "pagewidth" configuration option (which defaults to 72 characters)
794       is used.
795
796       The  "left", "centre", and "right" values may be literal strings, or
797       subroutines (just as a normal header/footer specification may be.) See
798       the second example, below.
799
800       Another alternative for header and footer options is to specify them as
801       a subroutine that returns a hash reference. The subroutine is called
802       for each page, then the resulting hash is treated like the hashes
803       described in the preceding paragraph. See the third example, below.
804
805       The "pagefeed" option acts in exactly the same way, to produce a
806       pagefeed which is appended after the footer. But note that the pagefeed
807       is not counted as part of the page length.
808
809       All three of these page components are recomputed at the start of each
810       new page, before the page contents are formatted (recomputing the
811       header and footer first makes it possible to determine how many lines
812       of data to format so as to adhere to the specified page length).
813
814       When the call to "form" is complete and the data has been fully
815       formatted, the footer subroutine is called one last time, with an extra
816       argument of 1.  The string returned by this final call is used as the
817       final footer.
818
819       So for example, a 60-line per page report, starting at page 7, with
820       appropriate headers and footers might be set up like so:
821
822               $page = 7;
823
824               form { header => sub { "Page $_[0]\n\n" },
825                      footer => sub { my ($pagenum, $lastpage) = @_;
826                                      return "" if $lastpage;
827                                      return "-"x50 . "\n"
828                                                    .form ">"x50, "...".($pagenum+1);
829                                     },
830                      pagefeed => "\n\n",
831                      pagelen  => 60
832                      pagenum => \$page,
833                    },
834                    $template,
835                    @data;
836
837       Note the recursive use of "form" within the "footer" option!
838
839       Alternatively, to set up headers and footers such that the running head
840       is right justified in the header and the page number is centred in the
841       footer:
842
843               form { header => { right => "Running head" },
844                      footer => { centre => sub { "Page $_[0]" } },
845                      pagelen  => 60
846                    },
847                    $template,
848                    @data;
849
850       The footer in the previous example could also have been specified the
851       other way around, as a subroutine that returns a hash (rather than a
852       hash containing a subroutine):
853
854               form { header => { right => "Running head" },
855                      footer => sub { return {centre => "Page $_[0]"} },
856                      pagelen  => 60
857                    },
858                    $template,
859                    @data;
860
861   The "cols" option
862       Sometimes data to be used in a "form" call needs to be extracted from a
863       nested data structure. For example, whilst it's easy to print a table
864       if you already have the data in columns:
865
866               @name  = qw(Tom Dick Harry);
867               @score = qw( 88   54    99);
868               @time  = qw( 15   13    18);
869
870               print form
871               '-------------------------------',
872               'Name             Score     Time',
873               '-------------------------------',
874               '[[[[[[[[[[[[[[   |||||     ||||',
875                \@name,          \@score,  \@time;
876
877       if the data is aggregrated by rows:
878
879               @data = (
880                   { name=>'Tom',   score=>88, time=>15 },
881                   { name=>'Dick',  score=>54, time=>13 },
882                   { name=>'Harry', score=>99, time=>18 },
883               );
884
885       you need to do some fancy mapping before it can be fed to "form":
886
887               print form
888               '-------------------------------',
889               'Name             Score     Time',
890               '-------------------------------',
891               '[[[[[[[[[[[[[[   |||||     ||||',
892               [map $$_{name},  @data],
893               [map $$_{score}, @data],
894               [map $$_{time} , @data];
895
896       Or you could just use the 'cols' option:
897
898               use Text::Reform qw(form columns);
899
900               print form
901               '-------------------------------',
902               'Name             Score     Time',
903               '-------------------------------',
904               '[[[[[[[[[[[[[[   |||||     ||||',
905               { cols => [qw(name score time)],
906                 from => \@data
907               };
908
909       This option takes an array of strings that specifies the keys of the
910       hash entries to be extracted into columns. The 'from' entry (which must
911       be present) also takes an array, which is expected to contain a list of
912       references to hashes. For each key specified, this option inserts into
913       "form"'s argument list a reference to an array containing the entries
914       for that key, extracted from each of the hash references supplied by
915       'from'. So, for example, the option:
916
917               { cols => [qw(name score time)],
918                 from => \@data
919               }
920
921       is replaced by three array references, the first containing the 'name'
922       entries for each hash inside @data, the second containing the 'score'
923       entries for each hash inside @data, and the third containing the 'time'
924       entries for each hash inside @data.
925
926       If, instead, you have a list of arrays containing the data:
927
928               @data = (
929                       # Time  Name     Score
930                       [ 15,   'Tom',   88 ],
931                       [ 13,   'Dick',  54 ],
932                       [ 18,   'Harry', 99 ],
933               );
934
935       the 'cols' option can extract the appropriate columns for that too. You
936       just specify the required indices, rather than keys:
937
938               print form
939               '-----------------------------',
940               'Name             Score   Time',
941               '-----------------------------',
942               '[[[[[[[[[[[[[[   |||||   ||||',
943               { cols => [1,2,0],
944                 from => \@data
945               }
946
947       Note that the indices can be in any order, and the resulting arrays are
948       returned in the same order.
949
950       If you need to merge columns extracted from two hierarchical data
951       structures, just concatenate the data structures first, like so:
952
953               print form
954               '---------------------------------------',
955               'Name             Score   Time   Ranking
956               '---------------------------------------',
957               '[[[[[[[[[[[[[[   |||||   ||||   |||||||',
958               { cols => [1,2,0],
959                 from => [@data, @olddata],
960               }
961
962       Of course, this only works if the columns are in the same positions in
963       both data sets (and both datasets are stored in arrays) or if the
964       columns have the same keys (and both datasets are in hashes). If not,
965       you would need to format each dataset separately, like so:
966
967               print form
968               '-----------------------------',
969               'Name             Score   Time'
970               '-----------------------------',
971               '[[[[[[[[[[[[[[   |||||   ||||',
972               { cols=>[1,2,0],  from=>\@data },
973               '[[[[[[[[[[[[[[   |||||   ||||',
974               { cols=>[3,8,1],  from=>\@olddata },
975               '[[[[[[[[[[[[[[   |||||   ||||',
976               { cols=>[qw(name score time)],  from=>\@otherdata };
977
978   The "tag" sub
979       The "tag" subroutine may be exported from the module.  It takes two
980       arguments: a tag specifier and a text to be entagged. The tag specifier
981       indicates the indenting of the tag, and of the text. The sub generates
982       an end-tag (using the usual "/tag" variant), unless an explicit end-tag
983       is provided as the third argument.
984
985       The tag specifier consists of the following components (in order):
986
987       An optional vertical spacer (zero or more whitespace-separated
988       newlines)
989           One or more whitespace characters up to a final mandatory newline.
990           This vertical space is inserted before the tag and after the end-
991           tag
992
993       An optional tag indent
994           Zero or more whitespace characters. Both the tag and the end-tag
995           are indented by this whitespace.
996
997       An optional left (opening) tag delimiter
998           Zero or more non-"word" characters (not alphanumeric or '_').  If
999           the opening delimiter is omitted, the character '<' is used.
1000
1001       A tag
1002           One or more "word" characters (alphanumeric or '_').
1003
1004       Optional tag arguments
1005           Any number of any characters
1006
1007       An optional right (closing) tag delimiter
1008           Zero or more non-"word" characters which balance some sequential
1009           portion of the opening tag delimiter. For example, if the opening
1010           delimiter is "<-(" then any of the following are acceptible closing
1011           delimiters: ")->", "->", or ">".  If the closing delimiter is
1012           omitted, the "inverse" of the opening delimiter is used (for
1013           example, ")->"),
1014
1015       An optional vertical spacer (zero or more newlines)
1016           One or more whitespace characters up to a mandatory newline. This
1017           vertical space is inserted before and after the complete text.
1018
1019       An optional text indent
1020           Zero or more space of tab characters. Each line of text is indented
1021           by this whitespace (in addition to the tag indent).
1022
1023       For example:
1024
1025               $text = "three lines\nof tagged\ntext";
1026
1027               print tag "A HREF=#nextsection", $text;
1028
1029       prints:
1030
1031               <A HREF=#nextsection>three lines
1032               of tagged
1033               text</A>
1034
1035       whereas:
1036
1037               print tag "[-:GRIN>>>\n", $text;
1038
1039       prints:
1040
1041               [-:GRIN>>>:-]
1042               three lines
1043               of tagged
1044               text
1045               [-:/GRIN>>>:-]
1046
1047       and:
1048
1049               print tag "\n\n   <BOLD>\n\n   ", $text, "<END BOLD>";
1050
1051       prints:
1052
1053
1054
1055                  <BOLD>
1056
1057                     three lines
1058                     of tagged
1059                     text
1060
1061                  <END BOLD>
1062
1063
1064
1065       (with the indicated spacing fore and aft).
1066

AUTHOR

1068       Damian Conway (damian@conway.org)
1069

BUGS

1071       The module uses "POSIX::strtod", which may be broken under certain
1072       versions of Windows. Applying the WINDOWS_PATCH patch to Reform.pm will
1073       replace the POSIX function with a copycat subroutine.
1074
1075       There are undoubtedly serious bugs lurking somewhere in code this funky
1076       :-) Bug reports and other feedback are most welcome.
1077
1079       Copyright (c) 1997-2007, Damian Conway "<DCONWAY@CPAN.org>". All rights
1080       reserved.
1081
1082       This module is free software; you can redistribute it and/or modify it
1083       under the same terms as Perl itself. See perlartistic.
1084

DISCLAIMER OF WARRANTY

1086       BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
1087       FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
1088       WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
1089       PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND,
1090       EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
1091       WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
1092       ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH
1093       YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
1094       NECESSARY SERVICING, REPAIR, OR CORRECTION.
1095
1096       IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
1097       WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
1098       REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENCE, BE LIABLE
1099       TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL, OR
1100       CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
1101       SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
1102       RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
1103       FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
1104       SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
1105       DAMAGES.
1106
1107
1108
1109perl v5.34.0                      2021-07-23                   Text::Reform(3)
Impressum