1GFORTRAN(1)                           GNU                          GFORTRAN(1)
2
3
4

NAME

6       gfortran - GNU Fortran compiler
7

SYNOPSIS

9       gfortran [-c|-S|-E]
10                [-g] [-pg] [-Olevel]
11                [-Wwarn...] [-pedantic]
12                [-Idir...] [-Ldir...]
13                [-Dmacro[=defn]...] [-Umacro]
14                [-foption...]
15                [-mmachine-option...]
16                [-o outfile] infile...
17
18       Only the most useful options are listed here; see below for the
19       remainder.
20

DESCRIPTION

22       The gfortran command supports all the options supported by the gcc
23       command.  Only options specific to GNU Fortran are documented here.
24
25       All GCC and GNU Fortran options are accepted both by gfortran and by
26       gcc (as well as any other drivers built at the same time, such as g++),
27       since adding GNU Fortran to the GCC distribution enables acceptance of
28       GNU Fortran options by all of the relevant drivers.
29
30       In some cases, options have positive and negative forms; the negative
31       form of -ffoo would be -fno-foo.  This manual documents only one of
32       these two forms, whichever one is not the default.
33

OPTIONS

35       Here is a summary of all the options specific to GNU Fortran, grouped
36       by type.  Explanations are in the following sections.
37
38       Fortran Language Options
39           -fall-intrinsics -fallow-argument-mismatch -fallow-invalid-boz
40           -fbackslash -fcray-pointer -fd-lines-as-code -fd-lines-as-comments
41           -fdec -fdec-char-conversions -fdec-structure -fdec-intrinsic-ints
42           -fdec-static -fdec-math -fdec-include -fdec-format-defaults
43           -fdec-blank-format-item -fdefault-double-8 -fdefault-integer-8
44           -fdefault-real-8 -fdefault-real-10 -fdefault-real-16 -fdollar-ok
45           -ffixed-line-length-n -ffixed-line-length-none -fpad-source
46           -ffree-form -ffree-line-length-n -ffree-line-length-none
47           -fimplicit-none -finteger-4-integer-8 -fmax-identifier-length
48           -fmodule-private -ffixed-form -fno-range-check -fopenacc -fopenmp
49           -freal-4-real-10 -freal-4-real-16 -freal-4-real-8 -freal-8-real-10
50           -freal-8-real-16 -freal-8-real-4 -std=std -ftest-forall-temp
51
52       Preprocessing Options
53           -A-question[=answer] -Aquestion=answer -C -CC -Dmacro[=defn] -H -P
54           -Umacro -cpp -dD -dI -dM -dN -dU -fworking-directory -imultilib dir
55           -iprefix file -iquote -isysroot dir -isystem dir -nocpp -nostdinc
56           -undef
57
58       Error and Warning Options
59           -Waliasing -Wall -Wampersand -Warray-bounds -Wc-binding-type
60           -Wcharacter-truncation -Wconversion -Wdo-subscript
61           -Wfunction-elimination -Wimplicit-interface -Wimplicit-procedure
62           -Wintrinsic-shadow -Wuse-without-only -Wintrinsics-std
63           -Wline-truncation -Wno-align-commons -Wno-overwrite-recursive
64           -Wno-tabs -Wreal-q-constant -Wsurprising -Wunderflow
65           -Wunused-parameter -Wrealloc-lhs -Wrealloc-lhs-all
66           -Wfrontend-loop-interchange -Wtarget-lifetime -fmax-errors=n
67           -fsyntax-only -pedantic -pedantic-errors
68
69       Debugging Options
70           -fbacktrace -fdump-fortran-optimized -fdump-fortran-original
71           -fdebug-aux-vars -fdump-fortran-global -fdump-parse-tree
72           -ffpe-trap=list -ffpe-summary=list
73
74       Directory Options
75           -Idir  -Jdir -fintrinsic-modules-path dir
76
77       Link Options
78           -static-libgfortran
79
80       Runtime Options
81           -fconvert=conversion -fmax-subrecord-length=length
82           -frecord-marker=length -fsign-zero
83
84       Interoperability Options
85           -fc-prototypes -fc-prototypes-external
86
87       Code Generation Options
88           -faggressive-function-elimination -fblas-matmul-limit=n
89           -fbounds-check -ftail-call-workaround -ftail-call-workaround=n
90           -fcheck-array-temporaries
91           -fcheck=<all|array-temps|bits|bounds|do|mem|pointer|recursion>
92           -fcoarray=<none|single|lib> -fexternal-blas -ff2c
93           -ffrontend-loop-interchange -ffrontend-optimize -finit-character=n
94           -finit-integer=n -finit-local-zero -finit-derived
95           -finit-logical=<true|false> -finit-real=<zero|inf|-inf|nan|snan>
96           -finline-matmul-limit=n -finline-arg-packing
97           -fmax-array-constructor=n -fmax-stack-var-size=n -fno-align-commons
98           -fno-automatic -fno-protect-parens -fno-underscoring
99           -fsecond-underscore -fpack-derived -frealloc-lhs -frecursive
100           -frepack-arrays -fshort-enums -fstack-arrays
101
102   Options controlling Fortran dialect
103       The following options control the details of the Fortran dialect
104       accepted by the compiler:
105
106       -ffree-form
107       -ffixed-form
108           Specify the layout used by the source file.  The free form layout
109           was introduced in Fortran 90.  Fixed form was traditionally used in
110           older Fortran programs.  When neither option is specified, the
111           source form is determined by the file extension.
112
113       -fall-intrinsics
114           This option causes all intrinsic procedures (including the GNU-
115           specific extensions) to be accepted.  This can be useful with -std=
116           to force standard-compliance but get access to the full range of
117           intrinsics available with gfortran.  As a consequence,
118           -Wintrinsics-std will be ignored and no user-defined procedure with
119           the same name as any intrinsic will be called except when it is
120           explicitly declared "EXTERNAL".
121
122       -fallow-argument-mismatch
123           Some code contains calls to external procedures with mismatches
124           between the calls and the procedure definition, or with mismatches
125           between different calls. Such code is non-conforming, and will
126           usually be flagged with an error.  This options degrades the error
127           to a warning, which can only be disabled by disabling all warnings
128           via -w.  Only a single occurrence per argument is flagged by this
129           warning.  -fallow-argument-mismatch is implied by -std=legacy.
130
131           Using this option is strongly discouraged.  It is possible to
132           provide standard-conforming code which allows different types of
133           arguments by using an explicit interface and TYPE(*).
134
135       -fallow-invalid-boz
136           A BOZ literal constant can occur in a limited number of contexts in
137           standard conforming Fortran.  This option degrades an error
138           condition to a warning, and allows a BOZ literal constant to appear
139           where the Fortran standard would otherwise prohibit its use.
140
141       -fd-lines-as-code
142       -fd-lines-as-comments
143           Enable special treatment for lines beginning with "d" or "D" in
144           fixed form sources.  If the -fd-lines-as-code option is given they
145           are treated as if the first column contained a blank.  If the
146           -fd-lines-as-comments option is given, they are treated as comment
147           lines.
148
149       -fdec
150           DEC compatibility mode. Enables extensions and other features that
151           mimic the default behavior of older compilers (such as DEC).  These
152           features are non-standard and should be avoided at all costs.  For
153           details on GNU Fortran's implementation of these extensions see the
154           full documentation.
155
156           Other flags enabled by this switch are: -fdollar-ok -fcray-pointer
157           -fdec-char-conversions -fdec-structure -fdec-intrinsic-ints
158           -fdec-static -fdec-math -fdec-include -fdec-blank-format-item
159           -fdec-format-defaults
160
161           If -fd-lines-as-code/-fd-lines-as-comments are unset, then -fdec
162           also sets -fd-lines-as-comments.
163
164       -fdec-char-conversions
165           Enable the use of character literals in assignments and "DATA"
166           statements for non-character variables.
167
168       -fdec-structure
169           Enable DEC "STRUCTURE" and "RECORD" as well as "UNION", "MAP", and
170           dot ('.') as a member separator (in addition to '%'). This is
171           provided for compatibility only; Fortran 90 derived types should be
172           used instead where possible.
173
174       -fdec-intrinsic-ints
175           Enable B/I/J/K kind variants of existing integer functions (e.g.
176           BIAND, IIAND, JIAND, etc...). For a complete list of intrinsics see
177           the full documentation.
178
179       -fdec-math
180           Enable legacy math intrinsics such as COTAN and degree-valued
181           trigonometric functions (e.g. TAND, ATAND, etc...) for
182           compatability with older code.
183
184       -fdec-static
185           Enable DEC-style STATIC and AUTOMATIC attributes to explicitly
186           specify the storage of variables and other objects.
187
188       -fdec-include
189           Enable parsing of INCLUDE as a statement in addition to parsing it
190           as INCLUDE line.  When parsed as INCLUDE statement, INCLUDE does
191           not have to be on a single line and can use line continuations.
192
193       -fdec-format-defaults
194           Enable format specifiers F, G and I to be used without width
195           specifiers, default widths will be used instead.
196
197       -fdec-blank-format-item
198           Enable a blank format item at the end of a format specification
199           i.e. nothing following the final comma.
200
201       -fdollar-ok
202           Allow $ as a valid non-first character in a symbol name. Symbols
203           that start with $ are rejected since it is unclear which rules to
204           apply to implicit typing as different vendors implement different
205           rules.  Using $ in "IMPLICIT" statements is also rejected.
206
207       -fbackslash
208           Change the interpretation of backslashes in string literals from a
209           single backslash character to "C-style" escape characters. The
210           following combinations are expanded "\a", "\b", "\f", "\n", "\r",
211           "\t", "\v", "\\", and "\0" to the ASCII characters alert,
212           backspace, form feed, newline, carriage return, horizontal tab,
213           vertical tab, backslash, and NUL, respectively.  Additionally,
214           "\x"nn, "\u"nnnn and "\U"nnnnnnnn (where each n is a hexadecimal
215           digit) are translated into the Unicode characters corresponding to
216           the specified code points. All other combinations of a character
217           preceded by \ are unexpanded.
218
219       -fmodule-private
220           Set the default accessibility of module entities to "PRIVATE".
221           Use-associated entities will not be accessible unless they are
222           explicitly declared as "PUBLIC".
223
224       -ffixed-line-length-n
225           Set column after which characters are ignored in typical fixed-form
226           lines in the source file, and, unless "-fno-pad-source", through
227           which spaces are assumed (as if padded to that length) after the
228           ends of short fixed-form lines.
229
230           Popular values for n include 72 (the standard and the default), 80
231           (card image), and 132 (corresponding to "extended-source" options
232           in some popular compilers).  n may also be none, meaning that the
233           entire line is meaningful and that continued character constants
234           never have implicit spaces appended to them to fill out the line.
235           -ffixed-line-length-0 means the same thing as
236           -ffixed-line-length-none.
237
238       -fno-pad-source
239           By default fixed-form lines have spaces assumed (as if padded to
240           that length) after the ends of short fixed-form lines.  This is not
241           done either if -ffixed-line-length-0, -ffixed-line-length-none or
242           if -fno-pad-source option is used.  With any of those options
243           continued character constants never have implicit spaces appended
244           to them to fill out the line.
245
246       -ffree-line-length-n
247           Set column after which characters are ignored in typical free-form
248           lines in the source file. The default value is 132.  n may be none,
249           meaning that the entire line is meaningful.  -ffree-line-length-0
250           means the same thing as -ffree-line-length-none.
251
252       -fmax-identifier-length=n
253           Specify the maximum allowed identifier length. Typical values are
254           31 (Fortran 95) and 63 (Fortran 2003 and later).
255
256       -fimplicit-none
257           Specify that no implicit typing is allowed, unless overridden by
258           explicit "IMPLICIT" statements.  This is the equivalent of adding
259           "implicit none" to the start of every procedure.
260
261       -fcray-pointer
262           Enable the Cray pointer extension, which provides C-like pointer
263           functionality.
264
265       -fopenacc
266           Enable the OpenACC extensions.  This includes OpenACC "!$acc"
267           directives in free form and "c$acc", *$acc and "!$acc" directives
268           in fixed form, "!$" conditional compilation sentinels in free form
269           and "c$", "*$" and "!$" sentinels in fixed form, and when linking
270           arranges for the OpenACC runtime library to be linked in.
271
272       -fopenmp
273           Enable the OpenMP extensions.  This includes OpenMP "!$omp"
274           directives in free form and "c$omp", *$omp and "!$omp" directives
275           in fixed form, "!$" conditional compilation sentinels in free form
276           and "c$", "*$" and "!$" sentinels in fixed form, and when linking
277           arranges for the OpenMP runtime library to be linked in.  The
278           option -fopenmp implies -frecursive.
279
280       -fno-range-check
281           Disable range checking on results of simplification of constant
282           expressions during compilation.  For example, GNU Fortran will give
283           an error at compile time when simplifying "a = 1. / 0".  With this
284           option, no error will be given and "a" will be assigned the value
285           "+Infinity".  If an expression evaluates to a value outside of the
286           relevant range of ["-HUGE()":HUGE()], then the expression will be
287           replaced by "-Inf" or "+Inf" as appropriate.  Similarly, "DATA
288           i/Z'FFFFFFFF'/" will result in an integer overflow on most systems,
289           but with -fno-range-check the value will "wrap around" and "i" will
290           be initialized to -1 instead.
291
292       -fdefault-integer-8
293           Set the default integer and logical types to an 8 byte wide type.
294           This option also affects the kind of integer constants like 42.
295           Unlike -finteger-4-integer-8, it does not promote variables with
296           explicit kind declaration.
297
298       -fdefault-real-8
299           Set the default real type to an 8 byte wide type.  This option also
300           affects the kind of non-double real constants like 1.0.  This
301           option promotes the default width of "DOUBLE PRECISION" and double
302           real constants like "1.d0" to 16 bytes if possible.  If
303           "-fdefault-double-8" is given along with "fdefault-real-8", "DOUBLE
304           PRECISION" and double real constants are not promoted.  Unlike
305           -freal-4-real-8, "fdefault-real-8" does not promote variables with
306           explicit kind declarations.
307
308       -fdefault-real-10
309           Set the default real type to an 10 byte wide type.  This option
310           also affects the kind of non-double real constants like 1.0.  This
311           option promotes the default width of "DOUBLE PRECISION" and double
312           real constants like "1.d0" to 16 bytes if possible.  If
313           "-fdefault-double-8" is given along with "fdefault-real-10",
314           "DOUBLE PRECISION" and double real constants are not promoted.
315           Unlike -freal-4-real-10, "fdefault-real-10" does not promote
316           variables with explicit kind declarations.
317
318       -fdefault-real-16
319           Set the default real type to an 16 byte wide type.  This option
320           also affects the kind of non-double real constants like 1.0.  This
321           option promotes the default width of "DOUBLE PRECISION" and double
322           real constants like "1.d0" to 16 bytes if possible.  If
323           "-fdefault-double-8" is given along with "fdefault-real-16",
324           "DOUBLE PRECISION" and double real constants are not promoted.
325           Unlike -freal-4-real-16, "fdefault-real-16" does not promote
326           variables with explicit kind declarations.
327
328       -fdefault-double-8
329           Set the "DOUBLE PRECISION" type and double real constants like
330           "1.d0" to an 8 byte wide type.  Do nothing if this is already the
331           default.  This option prevents -fdefault-real-8, -fdefault-real-10,
332           and -fdefault-real-16, from promoting "DOUBLE PRECISION" and double
333           real constants like "1.d0" to 16 bytes.
334
335       -finteger-4-integer-8
336           Promote all INTEGER(KIND=4) entities to an INTEGER(KIND=8)
337           entities.  If "KIND=8" is unavailable, then an error will be
338           issued.  This option should be used with care and may not be
339           suitable for your codes.  Areas of possible concern include calls
340           to external procedures, alignment in "EQUIVALENCE" and/or "COMMON",
341           generic interfaces, BOZ literal constant conversion, and I/O.
342           Inspection of the intermediate representation of the translated
343           Fortran code, produced by -fdump-tree-original, is suggested.
344
345       -freal-4-real-8
346       -freal-4-real-10
347       -freal-4-real-16
348       -freal-8-real-4
349       -freal-8-real-10
350       -freal-8-real-16
351           Promote all REAL(KIND=M) entities to REAL(KIND=N) entities.  If
352           REAL(KIND=N) is unavailable, then an error will be issued.  The
353           "-freal-4-" flags also affect the default real kind and the
354           "-freal-8-" flags also the double-precision real kind.  All other
355           real-kind types are unaffected by this option.  The promotion is
356           also applied to real literal constants of default and double-
357           precision kind and a specified kind number of 4 or 8, respectively.
358           However, "-fdefault-real-8", "-fdefault-real-10",
359           "-fdefault-real-10", and "-fdefault-double-8" take precedence for
360           the default and double-precision real kinds, both for real literal
361           constants and for declarations without a kind number.  Note that
362           for "REAL(KIND=KIND(1.0))" the literal may get promoted and then
363           the result may get promoted again.  These options should be used
364           with care and may not be suitable for your codes.  Areas of
365           possible concern include calls to external procedures, alignment in
366           "EQUIVALENCE" and/or "COMMON", generic interfaces, BOZ literal
367           constant conversion, and I/O and calls to intrinsic procedures when
368           passing a value to the "kind=" dummy argument.  Inspection of the
369           intermediate representation of the translated Fortran code,
370           produced by -fdump-fortran-original or -fdump-tree-original, is
371           suggested.
372
373       -std=std
374           Specify the standard to which the program is expected to conform,
375           which may be one of f95, f2003, f2008, f2018, gnu, or legacy.  The
376           default value for std is gnu, which specifies a superset of the
377           latest Fortran standard that includes all of the extensions
378           supported by GNU Fortran, although warnings will be given for
379           obsolete extensions not recommended for use in new code.  The
380           legacy value is equivalent but without the warnings for obsolete
381           extensions, and may be useful for old non-standard programs.  The
382           f95, f2003, f2008, and f2018 values specify strict conformance to
383           the Fortran 95, Fortran 2003, Fortran 2008 and Fortran 2018
384           standards, respectively; errors are given for all extensions beyond
385           the relevant language standard, and warnings are given for the
386           Fortran 77 features that are permitted but obsolescent in later
387           standards. The deprecated option -std=f2008ts acts as an alias for
388           -std=f2018. It is only present for backwards compatibility with
389           earlier gfortran versions and should not be used any more.
390
391       -ftest-forall-temp
392           Enhance test coverage by forcing most forall assignments to use
393           temporary.
394
395   Enable and customize preprocessing
396       Many Fortran compilers including GNU Fortran allow passing the source
397       code through a C preprocessor (CPP; sometimes also called the Fortran
398       preprocessor, FPP) to allow for conditional compilation.  In the case
399       of GNU Fortran, this is the GNU C Preprocessor in the traditional mode.
400       On systems with case-preserving file names, the preprocessor is
401       automatically invoked if the filename extension is .F, .FOR, .FTN,
402       .fpp, .FPP, .F90, .F95, .F03 or .F08.  To manually invoke the
403       preprocessor on any file, use -cpp, to disable preprocessing on files
404       where the preprocessor is run automatically, use -nocpp.
405
406       If a preprocessed file includes another file with the Fortran "INCLUDE"
407       statement, the included file is not preprocessed.  To preprocess
408       included files, use the equivalent preprocessor statement "#include".
409
410       If GNU Fortran invokes the preprocessor, "__GFORTRAN__" is defined.
411       The macros "__GNUC__", "__GNUC_MINOR__" and "__GNUC_PATCHLEVEL__" can
412       be used to determine the version of the compiler.  See
413       Top,,Overview,cpp,The C Preprocessor for details.
414
415       GNU Fortran supports a number of "INTEGER" and "REAL" kind types in
416       additional to the kind types required by the Fortran standard.  The
417       availability of any given kind type is architecture dependent.  The
418       following pre-defined preprocessor macros can be used to conditionally
419       include code for these additional kind types: "__GFC_INT_1__",
420       "__GFC_INT_2__", "__GFC_INT_8__", "__GFC_INT_16__", "__GFC_REAL_10__",
421       and "__GFC_REAL_16__".
422
423       While CPP is the de-facto standard for preprocessing Fortran code, Part
424       3 of the Fortran 95 standard (ISO/IEC 1539-3:1998) defines Conditional
425       Compilation, which is not widely used and not directly supported by the
426       GNU Fortran compiler.  You can use the program coco to preprocess such
427       files (<http://www.daniellnagle.com/coco.html>).
428
429       The following options control preprocessing of Fortran code:
430
431       -cpp
432       -nocpp
433           Enable preprocessing. The preprocessor is automatically invoked if
434           the file extension is .fpp, .FPP,  .F, .FOR, .FTN, .F90, .F95, .F03
435           or .F08. Use this option to manually enable preprocessing of any
436           kind of Fortran file.
437
438           To disable preprocessing of files with any of the above listed
439           extensions, use the negative form: -nocpp.
440
441           The preprocessor is run in traditional mode. Any restrictions of
442           the file-format, especially the limits on line length, apply for
443           preprocessed output as well, so it might be advisable to use the
444           -ffree-line-length-none or -ffixed-line-length-none options.
445
446       -dM Instead of the normal output, generate a list of '#define'
447           directives for all the macros defined during the execution of the
448           preprocessor, including predefined macros. This gives you a way of
449           finding out what is predefined in your version of the preprocessor.
450           Assuming you have no file foo.f90, the command
451
452                     touch foo.f90; gfortran -cpp -E -dM foo.f90
453
454           will show all the predefined macros.
455
456       -dD Like -dM except in two respects: it does not include the predefined
457           macros, and it outputs both the "#define" directives and the result
458           of preprocessing. Both kinds of output go to the standard output
459           file.
460
461       -dN Like -dD, but emit only the macro names, not their expansions.
462
463       -dU Like dD except that only macros that are expanded, or whose
464           definedness is tested in preprocessor directives, are output; the
465           output is delayed until the use or test of the macro; and '#undef'
466           directives are also output for macros tested but undefined at the
467           time.
468
469       -dI Output '#include' directives in addition to the result of
470           preprocessing.
471
472       -fworking-directory
473           Enable generation of linemarkers in the preprocessor output that
474           will let the compiler know the current working directory at the
475           time of preprocessing. When this option is enabled, the
476           preprocessor will emit, after the initial linemarker, a second
477           linemarker with the current working directory followed by two
478           slashes. GCC will use this directory, when it is present in the
479           preprocessed input, as the directory emitted as the current working
480           directory in some debugging information formats.  This option is
481           implicitly enabled if debugging information is enabled, but this
482           can be inhibited with the negated form -fno-working-directory. If
483           the -P flag is present in the command line, this option has no
484           effect, since no "#line" directives are emitted whatsoever.
485
486       -idirafter dir
487           Search dir for include files, but do it after all directories
488           specified with -I and the standard system directories have been
489           exhausted. dir is treated as a system include directory.  If dir
490           begins with "=", then the "=" will be replaced by the sysroot
491           prefix; see --sysroot and -isysroot.
492
493       -imultilib dir
494           Use dir as a subdirectory of the directory containing target-
495           specific C++ headers.
496
497       -iprefix prefix
498           Specify prefix as the prefix for subsequent -iwithprefix options.
499           If the prefix represents a directory, you should include the final
500           '/'.
501
502       -isysroot dir
503           This option is like the --sysroot option, but applies only to
504           header files. See the --sysroot option for more information.
505
506       -iquote dir
507           Search dir only for header files requested with "#include "file"";
508           they are not searched for "#include <file>", before all directories
509           specified by -I and before the standard system directories. If dir
510           begins with "=", then the "=" will be replaced by the sysroot
511           prefix; see --sysroot and -isysroot.
512
513       -isystem dir
514           Search dir for header files, after all directories specified by -I
515           but before the standard system directories. Mark it as a system
516           directory, so that it gets the same special treatment as is applied
517           to the standard system directories. If dir begins with "=", then
518           the "=" will be replaced by the sysroot prefix; see --sysroot and
519           -isysroot.
520
521       -nostdinc
522           Do not search the standard system directories for header files.
523           Only the directories you have specified with -I options (and the
524           directory of the current file, if appropriate) are searched.
525
526       -undef
527           Do not predefine any system-specific or GCC-specific macros.  The
528           standard predefined macros remain defined.
529
530       -Apredicate=answer
531           Make an assertion with the predicate predicate and answer answer.
532           This form is preferred to the older form -A predicate(answer),
533           which is still supported, because it does not use shell special
534           characters.
535
536       -A-predicate=answer
537           Cancel an assertion with the predicate predicate and answer answer.
538
539       -C  Do not discard comments. All comments are passed through to the
540           output file, except for comments in processed directives, which are
541           deleted along with the directive.
542
543           You should be prepared for side effects when using -C; it causes
544           the preprocessor to treat comments as tokens in their own right.
545           For example, comments appearing at the start of what would be a
546           directive line have the effect of turning that line into an
547           ordinary source line, since the first token on the line is no
548           longer a '#'.
549
550           Warning: this currently handles C-Style comments only. The
551           preprocessor does not yet recognize Fortran-style comments.
552
553       -CC Do not discard comments, including during macro expansion. This is
554           like -C, except that comments contained within macros are also
555           passed through to the output file where the macro is expanded.
556
557           In addition to the side-effects of the -C option, the -CC option
558           causes all C++-style comments inside a macro to be converted to
559           C-style comments. This is to prevent later use of that macro from
560           inadvertently commenting out the remainder of the source line. The
561           -CC option is generally used to support lint comments.
562
563           Warning: this currently handles C- and C++-Style comments only. The
564           preprocessor does not yet recognize Fortran-style comments.
565
566       -Dname
567           Predefine name as a macro, with definition 1.
568
569       -Dname=definition
570           The contents of definition are tokenized and processed as if they
571           appeared during translation phase three in a '#define' directive.
572           In particular, the definition will be truncated by embedded newline
573           characters.
574
575           If you are invoking the preprocessor from a shell or shell-like
576           program you may need to use the shell's quoting syntax to protect
577           characters such as spaces that have a meaning in the shell syntax.
578
579           If you wish to define a function-like macro on the command line,
580           write its argument list with surrounding parentheses before the
581           equals sign (if any). Parentheses are meaningful to most shells, so
582           you will need to quote the option. With sh and csh,
583           "-D'name(args...)=definition'" works.
584
585           -D and -U options are processed in the order they are given on the
586           command line. All -imacros file and -include file options are
587           processed after all -D and -U options.
588
589       -H  Print the name of each header file used, in addition to other
590           normal activities. Each name is indented to show how deep in the
591           '#include' stack it is.
592
593       -P  Inhibit generation of linemarkers in the output from the
594           preprocessor.  This might be useful when running the preprocessor
595           on something that is not C code, and will be sent to a program
596           which might be confused by the linemarkers.
597
598       -Uname
599           Cancel any previous definition of name, either built in or provided
600           with a -D option.
601
602   Options to request or suppress errors and warnings
603       Errors are diagnostic messages that report that the GNU Fortran
604       compiler cannot compile the relevant piece of source code.  The
605       compiler will continue to process the program in an attempt to report
606       further errors to aid in debugging, but will not produce any compiled
607       output.
608
609       Warnings are diagnostic messages that report constructions which are
610       not inherently erroneous but which are risky or suggest there is likely
611       to be a bug in the program.  Unless -Werror is specified, they do not
612       prevent compilation of the program.
613
614       You can request many specific warnings with options beginning -W, for
615       example -Wimplicit to request warnings on implicit declarations.  Each
616       of these specific warning options also has a negative form beginning
617       -Wno- to turn off warnings; for example, -Wno-implicit.  This manual
618       lists only one of the two forms, whichever is not the default.
619
620       These options control the amount and kinds of errors and warnings
621       produced by GNU Fortran:
622
623       -fmax-errors=n
624           Limits the maximum number of error messages to n, at which point
625           GNU Fortran bails out rather than attempting to continue processing
626           the source code.  If n is 0, there is no limit on the number of
627           error messages produced.
628
629       -fsyntax-only
630           Check the code for syntax errors, but do not actually compile it.
631           This will generate module files for each module present in the
632           code, but no other output file.
633
634       -Wpedantic
635       -pedantic
636           Issue warnings for uses of extensions to Fortran.  -pedantic also
637           applies to C-language constructs where they occur in GNU Fortran
638           source files, such as use of \e in a character constant within a
639           directive like "#include".
640
641           Valid Fortran programs should compile properly with or without this
642           option.  However, without this option, certain GNU extensions and
643           traditional Fortran features are supported as well.  With this
644           option, many of them are rejected.
645
646           Some users try to use -pedantic to check programs for conformance.
647           They soon find that it does not do quite what they want---it finds
648           some nonstandard practices, but not all.  However, improvements to
649           GNU Fortran in this area are welcome.
650
651           This should be used in conjunction with -std=f95, -std=f2003,
652           -std=f2008 or -std=f2018.
653
654       -pedantic-errors
655           Like -pedantic, except that errors are produced rather than
656           warnings.
657
658       -Wall
659           Enables commonly used warning options pertaining to usage that we
660           recommend avoiding and that we believe are easy to avoid.  This
661           currently includes -Waliasing, -Wampersand, -Wconversion,
662           -Wsurprising, -Wc-binding-type, -Wintrinsics-std, -Wtabs,
663           -Wintrinsic-shadow, -Wline-truncation, -Wtarget-lifetime,
664           -Winteger-division, -Wreal-q-constant, -Wunused and
665           -Wundefined-do-loop.
666
667       -Waliasing
668           Warn about possible aliasing of dummy arguments. Specifically, it
669           warns if the same actual argument is associated with a dummy
670           argument with INTENT(IN) and a dummy argument with INTENT(OUT) in a
671           call with an explicit interface.
672
673           The following example will trigger the warning.
674
675                     interface
676                       subroutine bar(a,b)
677                         integer, intent(in) :: a
678                         integer, intent(out) :: b
679                       end subroutine
680                     end interface
681                     integer :: a
682
683                     call bar(a,a)
684
685       -Wampersand
686           Warn about missing ampersand in continued character constants. The
687           warning is given with -Wampersand, -pedantic, -std=f95, -std=f2003,
688           -std=f2008 and -std=f2018. Note: With no ampersand given in a
689           continued character constant, GNU Fortran assumes continuation at
690           the first non-comment, non-whitespace character after the ampersand
691           that initiated the continuation.
692
693       -Warray-temporaries
694           Warn about array temporaries generated by the compiler.  The
695           information generated by this warning is sometimes useful in
696           optimization, in order to avoid such temporaries.
697
698       -Wc-binding-type
699           Warn if the a variable might not be C interoperable.  In
700           particular, warn if the variable has been declared using an
701           intrinsic type with default kind instead of using a kind parameter
702           defined for C interoperability in the intrinsic "ISO_C_Binding"
703           module.  This option is implied by -Wall.
704
705       -Wcharacter-truncation
706           Warn when a character assignment will truncate the assigned string.
707
708       -Wline-truncation
709           Warn when a source code line will be truncated.  This option is
710           implied by -Wall.  For free-form source code, the default is
711           -Werror=line-truncation such that truncations are reported as
712           error.
713
714       -Wconversion
715           Warn about implicit conversions that are likely to change the value
716           of the expression after conversion. Implied by -Wall.
717
718       -Wconversion-extra
719           Warn about implicit conversions between different types and kinds.
720           This option does not imply -Wconversion.
721
722       -Wextra
723           Enables some warning options for usages of language features which
724           may be problematic. This currently includes -Wcompare-reals,
725           -Wunused-parameter and -Wdo-subscript.
726
727       -Wfrontend-loop-interchange
728           Warn when using -ffrontend-loop-interchange for performing loop
729           interchanges.
730
731       -Wimplicit-interface
732           Warn if a procedure is called without an explicit interface.  Note
733           this only checks that an explicit interface is present.  It does
734           not check that the declared interfaces are consistent across
735           program units.
736
737       -Wimplicit-procedure
738           Warn if a procedure is called that has neither an explicit
739           interface nor has been declared as "EXTERNAL".
740
741       -Winteger-division
742           Warn if a constant integer division truncates its result.  As an
743           example, 3/5 evaluates to 0.
744
745       -Wintrinsics-std
746           Warn if gfortran finds a procedure named like an intrinsic not
747           available in the currently selected standard (with -std) and treats
748           it as "EXTERNAL" procedure because of this.  -fall-intrinsics can
749           be used to never trigger this behavior and always link to the
750           intrinsic regardless of the selected standard.
751
752       -Wno-overwrite-recursive
753           Do not warn when -fno-automatic is used with -frecursive. Recursion
754           will be broken if the relevant local variables do not have the
755           attribute "AUTOMATIC" explicitly declared. This option can be used
756           to suppress the warning when it is known that recursion is not
757           broken. Useful for build environments that use -Werror.
758
759       -Wreal-q-constant
760           Produce a warning if a real-literal-constant contains a "q"
761           exponent-letter.
762
763       -Wsurprising
764           Produce a warning when "suspicious" code constructs are
765           encountered.  While technically legal these usually indicate that
766           an error has been made.
767
768           This currently produces a warning under the following
769           circumstances:
770
771           *   An INTEGER SELECT construct has a CASE that can never be
772               matched as its lower value is greater than its upper value.
773
774           *   A LOGICAL SELECT construct has three CASE statements.
775
776           *   A TRANSFER specifies a source that is shorter than the
777               destination.
778
779           *   The type of a function result is declared more than once with
780               the same type.  If -pedantic or standard-conforming mode is
781               enabled, this is an error.
782
783           *   A "CHARACTER" variable is declared with negative length.
784
785       -Wtabs
786           By default, tabs are accepted as whitespace, but tabs are not
787           members of the Fortran Character Set.  For continuation lines, a
788           tab followed by a digit between 1 and 9 is supported.  -Wtabs will
789           cause a warning to be issued if a tab is encountered. Note, -Wtabs
790           is active for -pedantic, -std=f95, -std=f2003, -std=f2008,
791           -std=f2018 and -Wall.
792
793       -Wundefined-do-loop
794           Warn if a DO loop with step either 1 or -1 yields an underflow or
795           an overflow during iteration of an induction variable of the loop.
796           This option is implied by -Wall.
797
798       -Wunderflow
799           Produce a warning when numerical constant expressions are
800           encountered, which yield an UNDERFLOW during compilation. Enabled
801           by default.
802
803       -Wintrinsic-shadow
804           Warn if a user-defined procedure or module procedure has the same
805           name as an intrinsic; in this case, an explicit interface or
806           "EXTERNAL" or "INTRINSIC" declaration might be needed to get calls
807           later resolved to the desired intrinsic/procedure.  This option is
808           implied by -Wall.
809
810       -Wuse-without-only
811           Warn if a "USE" statement has no "ONLY" qualifier and thus
812           implicitly imports all public entities of the used module.
813
814       -Wunused-dummy-argument
815           Warn about unused dummy arguments. This option is implied by -Wall.
816
817       -Wunused-parameter
818           Contrary to gcc's meaning of -Wunused-parameter, gfortran's
819           implementation of this option does not warn about unused dummy
820           arguments (see -Wunused-dummy-argument), but about unused
821           "PARAMETER" values. -Wunused-parameter is implied by -Wextra if
822           also -Wunused or -Wall is used.
823
824       -Walign-commons
825           By default, gfortran warns about any occasion of variables being
826           padded for proper alignment inside a "COMMON" block. This warning
827           can be turned off via -Wno-align-commons. See also -falign-commons.
828
829       -Wfunction-elimination
830           Warn if any calls to impure functions are eliminated by the
831           optimizations enabled by the -ffrontend-optimize option.  This
832           option is implied by -Wextra.
833
834       -Wrealloc-lhs
835           Warn when the compiler might insert code to for allocation or
836           reallocation of an allocatable array variable of intrinsic type in
837           intrinsic assignments.  In hot loops, the Fortran 2003 reallocation
838           feature may reduce the performance.  If the array is already
839           allocated with the correct shape, consider using a whole-array
840           array-spec (e.g. "(:,:,:)") for the variable on the left-hand side
841           to prevent the reallocation check. Note that in some cases the
842           warning is shown, even if the compiler will optimize reallocation
843           checks away.  For instance, when the right-hand side contains the
844           same variable multiplied by a scalar.  See also -frealloc-lhs.
845
846       -Wrealloc-lhs-all
847           Warn when the compiler inserts code to for allocation or
848           reallocation of an allocatable variable; this includes scalars and
849           derived types.
850
851       -Wcompare-reals
852           Warn when comparing real or complex types for equality or
853           inequality.  This option is implied by -Wextra.
854
855       -Wtarget-lifetime
856           Warn if the pointer in a pointer assignment might be longer than
857           the its target. This option is implied by -Wall.
858
859       -Wzerotrip
860           Warn if a "DO" loop is known to execute zero times at compile time.
861           This option is implied by -Wall.
862
863       -Wdo-subscript
864           Warn if an array subscript inside a DO loop could lead to an out-
865           of-bounds access even if the compiler cannot prove that the
866           statement is actually executed, in cases like
867
868                     real a(3)
869                     do i=1,4
870                       if (condition(i)) then
871                         a(i) = 1.2
872                       end if
873                     end do
874
875           This option is implied by -Wextra.
876
877       -Werror
878           Turns all warnings into errors.
879
880       Some of these have no effect when compiling programs written in
881       Fortran.
882
883   Options for debugging your program or GNU Fortran
884       GNU Fortran has various special options that are used for debugging
885       either your program or the GNU Fortran compiler.
886
887       -fdump-fortran-original
888           Output the internal parse tree after translating the source program
889           into internal representation.  This option is mostly useful for
890           debugging the GNU Fortran compiler itself. The output generated by
891           this option might change between releases. This option may also
892           generate internal compiler errors for features which have only
893           recently been added.
894
895       -fdump-fortran-optimized
896           Output the parse tree after front-end optimization.  Mostly useful
897           for debugging the GNU Fortran compiler itself. The output generated
898           by this option might change between releases.  This option may also
899           generate internal compiler errors for features which have only
900           recently been added.
901
902       -fdump-parse-tree
903           Output the internal parse tree after translating the source program
904           into internal representation.  Mostly useful for debugging the GNU
905           Fortran compiler itself. The output generated by this option might
906           change between releases. This option may also generate internal
907           compiler errors for features which have only recently been added.
908           This option is deprecated; use "-fdump-fortran-original" instead.
909
910       -fdebug-aux-vars
911           Renames internal variables created by the gfortran front end and
912           makes them accessible to a debugger.  The name of the internal
913           variables then start with upper-case letters followed by an
914           underscore.  This option is useful for debugging the compiler's
915           code generation together with "-fdump-tree-original" and enabling
916           debugging of the executable program by using "-g" or "-ggdb3".
917
918       -fdump-fortran-global
919           Output a list of the global identifiers after translating into
920           middle-end representation. Mostly useful for debugging the GNU
921           Fortran compiler itself. The output generated by this option might
922           change between releases.  This option may also generate internal
923           compiler errors for features which have only recently been added.
924
925       -ffpe-trap=list
926           Specify a list of floating point exception traps to enable.  On
927           most systems, if a floating point exception occurs and the trap for
928           that exception is enabled, a SIGFPE signal will be sent and the
929           program being aborted, producing a core file useful for debugging.
930           list is a (possibly empty) comma-separated list of the following
931           exceptions: invalid (invalid floating point operation, such as
932           SQRT(-1.0)), zero (division by zero), overflow (overflow in a
933           floating point operation), underflow (underflow in a floating point
934           operation), inexact (loss of precision during operation), and
935           denormal (operation performed on a denormal value).  The first five
936           exceptions correspond to the five IEEE 754 exceptions, whereas the
937           last one (denormal) is not part of the IEEE 754 standard but is
938           available on some common architectures such as x86.
939
940           The first three exceptions (invalid, zero, and overflow) often
941           indicate serious errors, and unless the program has provisions for
942           dealing with these exceptions, enabling traps for these three
943           exceptions is probably a good idea.
944
945           If the option is used more than once in the command line, the lists
946           will be joined: '"ffpe-trap="list1 "ffpe-trap="list2' is equivalent
947           to "ffpe-trap="list1,list2.
948
949           Note that once enabled an exception cannot be disabled (no negative
950           form).
951
952           Many, if not most, floating point operations incur loss of
953           precision due to rounding, and hence the "ffpe-trap=inexact" is
954           likely to be uninteresting in practice.
955
956           By default no exception traps are enabled.
957
958       -ffpe-summary=list
959           Specify a list of floating-point exceptions, whose flag status is
960           printed to "ERROR_UNIT" when invoking "STOP" and "ERROR STOP".
961           list can be either none, all or a comma-separated list of the
962           following exceptions: invalid, zero, overflow, underflow, inexact
963           and denormal. (See -ffpe-trap for a description of the exceptions.)
964
965           If the option is used more than once in the command line, only the
966           last one will be used.
967
968           By default, a summary for all exceptions but inexact is shown.
969
970       -fno-backtrace
971           When a serious runtime error is encountered or a deadly signal is
972           emitted (segmentation fault, illegal instruction, bus error,
973           floating-point exception, and the other POSIX signals that have the
974           action core), the Fortran runtime library tries to output a
975           backtrace of the error. "-fno-backtrace" disables the backtrace
976           generation. This option only has influence for compilation of the
977           Fortran main program.
978
979   Options for directory search
980       These options affect how GNU Fortran searches for files specified by
981       the "INCLUDE" directive and where it searches for previously compiled
982       modules.
983
984       It also affects the search paths used by cpp when used to preprocess
985       Fortran source.
986
987       -Idir
988           These affect interpretation of the "INCLUDE" directive (as well as
989           of the "#include" directive of the cpp preprocessor).
990
991           Also note that the general behavior of -I and "INCLUDE" is pretty
992           much the same as of -I with "#include" in the cpp preprocessor,
993           with regard to looking for header.gcc files and other such things.
994
995           This path is also used to search for .mod files when previously
996           compiled modules are required by a "USE" statement.
997
998       -Jdir
999           This option specifies where to put .mod files for compiled modules.
1000           It is also added to the list of directories to searched by an "USE"
1001           statement.
1002
1003           The default is the current directory.
1004
1005       -fintrinsic-modules-path dir
1006           This option specifies the location of pre-compiled intrinsic
1007           modules, if they are not in the default location expected by the
1008           compiler.
1009
1010   Influencing the linking step
1011       These options come into play when the compiler links object files into
1012       an executable output file. They are meaningless if the compiler is not
1013       doing a link step.
1014
1015       -static-libgfortran
1016           On systems that provide libgfortran as a shared and a static
1017           library, this option forces the use of the static version. If no
1018           shared version of libgfortran was built when the compiler was
1019           configured, this option has no effect.
1020
1021   Influencing runtime behavior
1022       These options affect the runtime behavior of programs compiled with GNU
1023       Fortran.
1024
1025       -fconvert=conversion
1026           Specify the representation of data for unformatted files.  Valid
1027           values for conversion on most systems are: native, the default;
1028           swap, swap between big- and little-endian; big-endian, use big-
1029           endian representation for unformatted files; little-endian, use
1030           little-endian representation for unformatted files.
1031
1032           On POWER systems which suppport -mabi=ieeelongdouble, there are
1033           additional options, which can be combined with others with commas.
1034           Those are
1035
1036           @w<-fconvert=r16_ieee Use IEEE 128-bit format for>
1037               REAL(KIND=16).
1038
1039           @w<-fconvert=r16_ibm Use IBM long double format for>
1040               REAL(KIND=16).
1041
1042           This option has an effect only when used in the main program.  The
1043           "CONVERT" specifier and the GFORTRAN_CONVERT_UNIT environment
1044           variable override the default specified by -fconvert.
1045
1046       -frecord-marker=length
1047           Specify the length of record markers for unformatted files.  Valid
1048           values for length are 4 and 8.  Default is 4.  This is different
1049           from previous versions of gfortran, which specified a default
1050           record marker length of 8 on most systems.  If you want to read or
1051           write files compatible with earlier versions of gfortran, use
1052           -frecord-marker=8.
1053
1054       -fmax-subrecord-length=length
1055           Specify the maximum length for a subrecord.  The maximum permitted
1056           value for length is 2147483639, which is also the default.  Only
1057           really useful for use by the gfortran testsuite.
1058
1059       -fsign-zero
1060           When enabled, floating point numbers of value zero with the sign
1061           bit set are written as negative number in formatted output and
1062           treated as negative in the "SIGN" intrinsic.  -fno-sign-zero does
1063           not print the negative sign of zero values (or values rounded to
1064           zero for I/O) and regards zero as positive number in the "SIGN"
1065           intrinsic for compatibility with Fortran 77. The default is
1066           -fsign-zero.
1067
1068   Options for code generation conventions
1069       These machine-independent options control the interface conventions
1070       used in code generation.
1071
1072       Most of them have both positive and negative forms; the negative form
1073       of -ffoo would be -fno-foo.  In the table below, only one of the forms
1074       is listed---the one which is not the default.  You can figure out the
1075       other form by either removing no- or adding it.
1076
1077       -fno-automatic
1078           Treat each program unit (except those marked as RECURSIVE) as if
1079           the "SAVE" statement were specified for every local variable and
1080           array referenced in it. Does not affect common blocks. (Some
1081           Fortran compilers provide this option under the name -static or
1082           -save.)  The default, which is -fautomatic, uses the stack for
1083           local variables smaller than the value given by
1084           -fmax-stack-var-size.  Use the option -frecursive to use no static
1085           memory.
1086
1087           Local variables or arrays having an explicit "SAVE" attribute are
1088           silently ignored unless the -pedantic option is added.
1089
1090       -ff2c
1091           Generate code designed to be compatible with code generated by g77
1092           and f2c.
1093
1094           The calling conventions used by g77 (originally implemented in f2c)
1095           require functions that return type default "REAL" to actually
1096           return the C type "double", and functions that return type
1097           "COMPLEX" to return the values via an extra argument in the calling
1098           sequence that points to where to store the return value.  Under the
1099           default GNU calling conventions, such functions simply return their
1100           results as they would in GNU C---default "REAL" functions return
1101           the C type "float", and "COMPLEX" functions return the GNU C type
1102           "complex".  Additionally, this option implies the
1103           -fsecond-underscore option, unless -fno-second-underscore is
1104           explicitly requested.
1105
1106           This does not affect the generation of code that interfaces with
1107           the libgfortran library.
1108
1109           Caution: It is not a good idea to mix Fortran code compiled with
1110           -ff2c with code compiled with the default -fno-f2c calling
1111           conventions as, calling "COMPLEX" or default "REAL" functions
1112           between program parts which were compiled with different calling
1113           conventions will break at execution time.
1114
1115           Caution: This will break code which passes intrinsic functions of
1116           type default "REAL" or "COMPLEX" as actual arguments, as the
1117           library implementations use the -fno-f2c calling conventions.
1118
1119       -fno-underscoring
1120           Do not transform names of entities specified in the Fortran source
1121           file by appending underscores to them.
1122
1123           With -funderscoring in effect, GNU Fortran appends one underscore
1124           to external names with no underscores.  This is done to ensure
1125           compatibility with code produced by many UNIX Fortran compilers.
1126
1127           Caution: The default behavior of GNU Fortran is incompatible with
1128           f2c and g77, please use the -ff2c option if you want object files
1129           compiled with GNU Fortran to be compatible with object code created
1130           with these tools.
1131
1132           Use of -fno-underscoring is not recommended unless you are
1133           experimenting with issues such as integration of GNU Fortran into
1134           existing system environments (vis-à-vis existing libraries, tools,
1135           and so on).
1136
1137           For example, with -funderscoring, and assuming that j() and
1138           max_count() are external functions while "my_var" and "lvar" are
1139           local variables, a statement like
1140
1141                   I = J() + MAX_COUNT (MY_VAR, LVAR)
1142
1143           is implemented as something akin to:
1144
1145                   i = j_() + max_count__(&my_var__, &lvar);
1146
1147           With -fno-underscoring, the same statement is implemented as:
1148
1149                   i = j() + max_count(&my_var, &lvar);
1150
1151           Use of -fno-underscoring allows direct specification of user-
1152           defined names while debugging and when interfacing GNU Fortran code
1153           with other languages.
1154
1155           Note that just because the names match does not mean that the
1156           interface implemented by GNU Fortran for an external name matches
1157           the interface implemented by some other language for that same
1158           name.  That is, getting code produced by GNU Fortran to link to
1159           code produced by some other compiler using this or any other method
1160           can be only a small part of the overall solution---getting the code
1161           generated by both compilers to agree on issues other than naming
1162           can require significant effort, and, unlike naming disagreements,
1163           linkers normally cannot detect disagreements in these other areas.
1164
1165           Also, note that with -fno-underscoring, the lack of appended
1166           underscores introduces the very real possibility that a user-
1167           defined external name will conflict with a name in a system
1168           library, which could make finding unresolved-reference bugs quite
1169           difficult in some cases---they might occur at program run time, and
1170           show up only as buggy behavior at run time.
1171
1172           In future versions of GNU Fortran we hope to improve naming and
1173           linking issues so that debugging always involves using the names as
1174           they appear in the source, even if the names as seen by the linker
1175           are mangled to prevent accidental linking between procedures with
1176           incompatible interfaces.
1177
1178       -fsecond-underscore
1179           By default, GNU Fortran appends an underscore to external names.
1180           If this option is used GNU Fortran appends two underscores to names
1181           with underscores and one underscore to external names with no
1182           underscores.  GNU Fortran also appends two underscores to internal
1183           names with underscores to avoid naming collisions with external
1184           names.
1185
1186           This option has no effect if -fno-underscoring is in effect.  It is
1187           implied by the -ff2c option.
1188
1189           Otherwise, with this option, an external name such as "MAX_COUNT"
1190           is implemented as a reference to the link-time external symbol
1191           "max_count__", instead of "max_count_".  This is required for
1192           compatibility with g77 and f2c, and is implied by use of the -ff2c
1193           option.
1194
1195       -fcoarray=<keyword>
1196           none
1197               Disable coarray support; using coarray declarations and image-
1198               control statements will produce a compile-time error. (Default)
1199
1200           single
1201               Single-image mode, i.e. num_images() is always one.
1202
1203           lib Library-based coarray parallelization; a suitable GNU Fortran
1204               coarray library needs to be linked.
1205
1206       -fcheck=<keyword>
1207           Enable the generation of run-time checks; the argument shall be a
1208           comma-delimited list of the following keywords.  Prefixing a check
1209           with no- disables it if it was activated by a previous
1210           specification.
1211
1212           all Enable all run-time test of -fcheck.
1213
1214           array-temps
1215               Warns at run time when for passing an actual argument a
1216               temporary array had to be generated. The information generated
1217               by this warning is sometimes useful in optimization, in order
1218               to avoid such temporaries.
1219
1220               Note: The warning is only printed once per location.
1221
1222           bits
1223               Enable generation of run-time checks for invalid arguments to
1224               the bit manipulation intrinsics.
1225
1226           bounds
1227               Enable generation of run-time checks for array subscripts and
1228               against the declared minimum and maximum values.  It also
1229               checks array indices for assumed and deferred shape arrays
1230               against the actual allocated bounds and ensures that all string
1231               lengths are equal for character array constructors without an
1232               explicit typespec.
1233
1234               Some checks require that -fcheck=bounds is set for the
1235               compilation of the main program.
1236
1237               Note: In the future this may also include other forms of
1238               checking, e.g., checking substring references.
1239
1240           do  Enable generation of run-time checks for invalid modification
1241               of loop iteration variables.
1242
1243           mem Enable generation of run-time checks for memory allocation.
1244               Note: This option does not affect explicit allocations using
1245               the "ALLOCATE" statement, which will be always checked.
1246
1247           pointer
1248               Enable generation of run-time checks for pointers and
1249               allocatables.
1250
1251           recursion
1252               Enable generation of run-time checks for recursively called
1253               subroutines and functions which are not marked as recursive.
1254               See also -frecursive.  Note: This check does not work for
1255               OpenMP programs and is disabled if used together with
1256               -frecursive and -fopenmp.
1257
1258           Example: Assuming you have a file foo.f90, the command
1259
1260                     gfortran -fcheck=all,no-array-temps foo.f90
1261
1262           will compile the file with all checks enabled as specified above
1263           except warnings for generated array temporaries.
1264
1265       -fbounds-check
1266           Deprecated alias for -fcheck=bounds.
1267
1268       -ftail-call-workaround
1269       -ftail-call-workaround=n
1270           Some C interfaces to Fortran codes violate the gfortran ABI by
1271           omitting the hidden character length arguments as described in
1272             This can lead to crashes because pushing arguments for tail calls
1273           can overflow the stack.
1274
1275           To provide a workaround for existing binary packages, this option
1276           disables tail call optimization for gfortran procedures with
1277           character arguments.  With -ftail-call-workaround=2 tail call
1278           optimization is disabled in all gfortran procedures with character
1279           arguments, with -ftail-call-workaround=1 or equivalent
1280           -ftail-call-workaround only in gfortran procedures with character
1281           arguments that call implicitly prototyped procedures.
1282
1283           Using this option can lead to problems including crashes due to
1284           insufficient stack space.
1285
1286           It is very strongly recommended to fix the code in question.  The
1287           -fc-prototypes-external option can be used to generate prototypes
1288           which conform to gfortran's ABI, for inclusion in the source code.
1289
1290           Support for this option will likely be withdrawn in a future
1291           release of gfortran.
1292
1293           The negative form, -fno-tail-call-workaround or equivalent
1294           -ftail-call-workaround=0, can be used to disable this option.
1295
1296           Default is currently -ftail-call-workaround, this will change in
1297           future releases.
1298
1299       -fcheck-array-temporaries
1300           Deprecated alias for -fcheck=array-temps.
1301
1302       -fmax-array-constructor=n
1303           This option can be used to increase the upper limit permitted in
1304           array constructors.  The code below requires this option to expand
1305           the array at compile time.
1306
1307                   program test
1308                   implicit none
1309                   integer j
1310                   integer, parameter :: n = 100000
1311                   integer, parameter :: i(n) = (/ (2*j, j = 1, n) /)
1312                   print '(10(I0,1X))', i
1313                   end program test
1314
1315           Caution:  This option can lead to long compile times and
1316           excessively large object files.
1317
1318           The default value for n is 65535.
1319
1320       -fmax-stack-var-size=n
1321           This option specifies the size in bytes of the largest array that
1322           will be put on the stack; if the size is exceeded static memory is
1323           used (except in procedures marked as RECURSIVE). Use the option
1324           -frecursive to allow for recursive procedures which do not have a
1325           RECURSIVE attribute or for parallel programs. Use -fno-automatic to
1326           never use the stack.
1327
1328           This option currently only affects local arrays declared with
1329           constant bounds, and may not apply to all character variables.
1330           Future versions of GNU Fortran may improve this behavior.
1331
1332           The default value for n is 65536.
1333
1334       -fstack-arrays
1335           Adding this option will make the Fortran compiler put all arrays of
1336           unknown size and array temporaries onto stack memory.  If your
1337           program uses very large local arrays it is possible that you will
1338           have to extend your runtime limits for stack memory on some
1339           operating systems. This flag is enabled by default at optimization
1340           level -Ofast unless -fmax-stack-var-size is specified.
1341
1342       -fpack-derived
1343           This option tells GNU Fortran to pack derived type members as
1344           closely as possible.  Code compiled with this option is likely to
1345           be incompatible with code compiled without this option, and may
1346           execute slower.
1347
1348       -frepack-arrays
1349           In some circumstances GNU Fortran may pass assumed shape array
1350           sections via a descriptor describing a noncontiguous area of
1351           memory.  This option adds code to the function prologue to repack
1352           the data into a contiguous block at runtime.
1353
1354           This should result in faster accesses to the array.  However it can
1355           introduce significant overhead to the function call, especially
1356           when the passed data is noncontiguous.
1357
1358       -fshort-enums
1359           This option is provided for interoperability with C code that was
1360           compiled with the -fshort-enums option.  It will make GNU Fortran
1361           choose the smallest "INTEGER" kind a given enumerator set will fit
1362           in, and give all its enumerators this kind.
1363
1364       -finline-arg-packing
1365           When passing an assumed-shape argument of a procedure as actual
1366           argument to an assumed-size or explicit size or as argument to a
1367           procedure that does not have an explicit interface, the argument
1368           may have to be packed, that is put into contiguous memory. An
1369           example is the call to "foo" in
1370
1371                     subroutine foo(a)
1372                        real, dimension(*) :: a
1373                     end subroutine foo
1374                     subroutine bar(b)
1375                        real, dimension(:) :: b
1376                        call foo(b)
1377                     end subroutine bar
1378
1379           When -finline-arg-packing is in effect, this packing will be
1380           performed by inline code. This allows for more optimization while
1381           increasing code size.
1382
1383           -finline-arg-packing is implied by any of the -O options except
1384           when optimizing for size via -Os.  If the code contains a very
1385           large number of argument that have to be packed, code size and also
1386           compilation time may become excessive.  If that is the case, it may
1387           be better to disable this option.  Instances of packing can be
1388           found by using -Warray-temporaries.
1389
1390       -fexternal-blas
1391           This option will make gfortran generate calls to BLAS functions for
1392           some matrix operations like "MATMUL", instead of using our own
1393           algorithms, if the size of the matrices involved is larger than a
1394           given limit (see -fblas-matmul-limit).  This may be profitable if
1395           an optimized vendor BLAS library is available.  The BLAS library
1396           will have to be specified at link time.
1397
1398       -fblas-matmul-limit=n
1399           Only significant when -fexternal-blas is in effect.  Matrix
1400           multiplication of matrices with size larger than (or equal to) n
1401           will be performed by calls to BLAS functions, while others will be
1402           handled by gfortran internal algorithms. If the matrices involved
1403           are not square, the size comparison is performed using the
1404           geometric mean of the dimensions of the argument and result
1405           matrices.
1406
1407           The default value for n is 30.
1408
1409       -finline-matmul-limit=n
1410           When front-end optimization is active, some calls to the "MATMUL"
1411           intrinsic function will be inlined.  This may result in code size
1412           increase if the size of the matrix cannot be determined at compile
1413           time, as code for both cases is generated.  Setting
1414           "-finline-matmul-limit=0" will disable inlining in all cases.
1415           Setting this option with a value of n will produce inline code for
1416           matrices with size up to n. If the matrices involved are not
1417           square, the size comparison is performed using the geometric mean
1418           of the dimensions of the argument and result matrices.
1419
1420           The default value for n is 30.  The "-fblas-matmul-limit" can be
1421           used to change this value.
1422
1423       -frecursive
1424           Allow indirect recursion by forcing all local arrays to be
1425           allocated on the stack. This flag cannot be used together with
1426           -fmax-stack-var-size= or -fno-automatic.
1427
1428       -finit-local-zero
1429       -finit-derived
1430       -finit-integer=n
1431       -finit-real=<zero|inf|-inf|nan|snan>
1432       -finit-logical=<true|false>
1433       -finit-character=n
1434           The -finit-local-zero option instructs the compiler to initialize
1435           local "INTEGER", "REAL", and "COMPLEX" variables to zero, "LOGICAL"
1436           variables to false, and "CHARACTER" variables to a string of null
1437           bytes.  Finer-grained initialization options are provided by the
1438           -finit-integer=n, -finit-real=<zero|inf|-inf|nan|snan> (which also
1439           initializes the real and imaginary parts of local "COMPLEX"
1440           variables), -finit-logical=<true|false>, and -finit-character=n
1441           (where n is an ASCII character value) options.
1442
1443           With -finit-derived, components of derived type variables will be
1444           initialized according to these flags.  Components whose type is not
1445           covered by an explicit -finit-* flag will be treated as described
1446           above with -finit-local-zero.
1447
1448           These options do not initialize
1449
1450           *   objects with the POINTER attribute
1451
1452           *   allocatable arrays
1453
1454           *   variables that appear in an "EQUIVALENCE" statement.
1455
1456           (These limitations may be removed in future releases).
1457
1458           Note that the -finit-real=nan option initializes "REAL" and
1459           "COMPLEX" variables with a quiet NaN. For a signalling NaN use
1460           -finit-real=snan; note, however, that compile-time optimizations
1461           may convert them into quiet NaN and that trapping needs to be
1462           enabled (e.g. via -ffpe-trap).
1463
1464           The -finit-integer option will parse the value into an integer of
1465           type INTEGER(kind=C_LONG) on the host.  Said value is then assigned
1466           to the integer variables in the Fortran code, which might result in
1467           wraparound if the value is too large for the kind.
1468
1469           Finally, note that enabling any of the -finit-* options will
1470           silence warnings that would have been emitted by -Wuninitialized
1471           for the affected local variables.
1472
1473       -falign-commons
1474           By default, gfortran enforces proper alignment of all variables in
1475           a "COMMON" block by padding them as needed. On certain platforms
1476           this is mandatory, on others it increases performance. If a
1477           "COMMON" block is not declared with consistent data types
1478           everywhere, this padding can cause trouble, and -fno-align-commons
1479           can be used to disable automatic alignment. The same form of this
1480           option should be used for all files that share a "COMMON" block.
1481           To avoid potential alignment issues in "COMMON" blocks, it is
1482           recommended to order objects from largest to smallest.
1483
1484       -fno-protect-parens
1485           By default the parentheses in expression are honored for all
1486           optimization levels such that the compiler does not do any re-
1487           association. Using -fno-protect-parens allows the compiler to
1488           reorder "REAL" and "COMPLEX" expressions to produce faster code.
1489           Note that for the re-association optimization -fno-signed-zeros and
1490           -fno-trapping-math need to be in effect. The parentheses protection
1491           is enabled by default, unless -Ofast is given.
1492
1493       -frealloc-lhs
1494           An allocatable left-hand side of an intrinsic assignment is
1495           automatically (re)allocated if it is either unallocated or has a
1496           different shape. The option is enabled by default except when
1497           -std=f95 is given. See also -Wrealloc-lhs.
1498
1499       -faggressive-function-elimination
1500           Functions with identical argument lists are eliminated within
1501           statements, regardless of whether these functions are marked "PURE"
1502           or not. For example, in
1503
1504                     a = f(b,c) + f(b,c)
1505
1506           there will only be a single call to "f".  This option only works if
1507           -ffrontend-optimize is in effect.
1508
1509       -ffrontend-optimize
1510           This option performs front-end optimization, based on manipulating
1511           parts the Fortran parse tree.  Enabled by default by any -O option
1512           except -O0 and -Og.  Optimizations enabled by this option include:
1513
1514           *<inlining calls to "MATMUL",>
1515           *<elimination of identical function calls within expressions,>
1516           *<removing unnecessary calls to "TRIM" in comparisons and
1517           assignments,>
1518           *<replacing TRIM(a) with "a(1:LEN_TRIM(a))" and>
1519           *<short-circuiting of logical operators (".AND." and ".OR.").>
1520
1521           It can be deselected by specifying -fno-frontend-optimize.
1522
1523       -ffrontend-loop-interchange
1524           Attempt to interchange loops in the Fortran front end where
1525           profitable.  Enabled by default by any -O option.  At the moment,
1526           this option only affects "FORALL" and "DO CONCURRENT" statements
1527           with several forall triplets.
1528

ENVIRONMENT

1530       The gfortran compiler currently does not make use of any environment
1531       variables to control its operation above and beyond those that affect
1532       the operation of gcc.
1533

BUGS

1535       For instructions on reporting bugs, see
1536       <http://bugzilla.redhat.com/bugzilla>.
1537

SEE ALSO

1539       gpl(7), gfdl(7), fsf-funding(7), cpp(1), gcov(1), gcc(1), as(1), ld(1),
1540       gdb(1), dbx(1) and the Info entries for gcc, cpp, gfortran, as, ld,
1541       binutils and gdb.
1542

AUTHOR

1544       See the Info entry for gfortran for contributors to GCC and GNU
1545       Fortran.
1546
1548       Copyright (c) 2004-2022 Free Software Foundation, Inc.
1549
1550       Permission is granted to copy, distribute and/or modify this document
1551       under the terms of the GNU Free Documentation License, Version 1.3 or
1552       any later version published by the Free Software Foundation; with the
1553       Invariant Sections being "Funding Free Software", the Front-Cover Texts
1554       being (a) (see below), and with the Back-Cover Texts being (b) (see
1555       below).  A copy of the license is included in the gfdl(7) man page.
1556
1557       (a) The FSF's Front-Cover Text is:
1558
1559            A GNU Manual
1560
1561       (b) The FSF's Back-Cover Text is:
1562
1563            You have freedom to copy and modify this GNU Manual, like GNU
1564            software.  Copies published by the Free Software Foundation raise
1565            funds for GNU development.
1566
1567
1568
1569gcc-12.2.1                        2022-11-21                       GFORTRAN(1)
Impressum