1Net::SSH2(3)          User Contributed Perl Documentation         Net::SSH2(3)
2
3
4

NAME

6       Net::SSH2 - Support for the SSH 2 protocol via libssh2.
7

SYNOPSIS

9         use Net::SSH2;
10
11         my $ssh2 = Net::SSH2->new();
12
13         $ssh2->connect('example.com')
14           or $ssh2->die_with_error;
15
16         $ssh->check_hostkey('ask')
17           or $ssh2->die_with_error;
18
19         $ssh->auth_publickey($ENV{USER}, "$ENV{HOME}/.ssh/id_rsa.pub", "$ENV{HOME}/.ssh/id_rsa")
20           or $ssh->die_with_error;
21
22         my $chan = $ssh2->channel()
23           or $ssh2->die_with_error;
24
25         $chan->exec('ls')
26           or $ssh2->die_with_error;
27
28         print while <$chan>;
29
30         print "EXIT CODE: ", $chan->exit_status, "\n";
31
32         $chan->close;
33
34         my $sftp = $ssh2->sftp()
35           or $ssh2->die_with_error;;
36
37         my $fh = $sftp->open('/etc/passwd')
38           or $sftp->die_with_error;
39
40         print while <$fh>;
41

DESCRIPTION

43       Net::SSH2 is a Perl interface to the libssh2 (<http://www.libssh2.org>)
44       library.  It supports the SSH2 protocol (there is no support for SSH1)
45       with all of the key exchanges, ciphers, and compression of libssh2.
46
47       Even if the module can be compiled and linked against very old versions
48       of the library, nothing below 1.5.0 should really be used (older
49       versions were quite buggy and unreliable) and version 1.7.0 or later is
50       recommended.
51
52   Error handling
53       Unless otherwise indicated, methods return a true value on success and
54       "undef" on failure; use the "error" method to get extended error
55       information.
56
57       Important: methods in Net::SSH2 not backed by libssh2 functions (i.e.
58       "check_hostkey" or SCP related methods) require libssh2 1.7.0 or later
59       in order to set the error state. That means that after any of those
60       methods fails, "error" would not return the real code but just some
61       bogus result when an older version of the library is used.
62
63   Typical usage
64       The typical usage order is as follows:
65
66       1.  Create the SSH2 object calling "new".
67
68       2.  Configure the session if required. For instance, enabling
69           compression or picking some specific encryption methods.
70
71       3.  Establish the SSH connection calling the method "connect".
72
73       4.  Check the remote host public key calling "check_hostkey".
74
75       5.  Authenticate calling the required authentication methods.
76
77       6.  Call "channel" and related methods to create new bidirectional
78           communication channels over the SSH connection.
79
80       7.  Close the connection letting the Net::SSH2 object go out of scope
81           or calling "disconnect" explicitly.
82

CONSTANTS

84       All the constants defined in libssh2 can be imported from Net::SSH2.
85
86       For instance:
87
88          use Net::SSH2 qw(LIBSSH2_CHANNEL_EXTENDED_DATA_MERGE
89                           LIBSSH2_CHANNEL_FLUSH_ALL
90                           LIBSSH2_HOSTKEY_POLICY_ASK);
91
92       Though note that most methods accept the uncommon part of the constant
93       name as a string. For instance the following two method calls are
94       equivalent:
95
96           $channel->ext_data(LIBSSH2_CHANNEL_EXTENDED_DATA_MERGE);
97           $channel->ext_data('merge');
98
99       Tags can be used to import the following constant subsets:
100
101         callback channel error socket trace hash method
102         disconnect policy fx fxf sftp
103
104       The tag "all" can also be used to import all of them.
105

METHODS

107   new ( %options )
108       Create new Net::SSH2 object representing a SSH session.
109
110       The accepted options are as follows:
111
112       timeout
113           Sets the default timeout in milliseconds. See "timeout".
114
115       trace
116           Sets tracing. See "trace".
117
118           Example:
119
120               my $ssh2 = Net::SSH2->new(trace => -1);
121
122           Note that tracing requires a version of libssh2 compiled with
123           debugging support.
124
125       debug
126           Enable debugging. See "debug".
127
128       compress
129           Sets flag "LIBSSH2_FLAG_COMPRESS". See "flag".
130
131       sigpipe
132           Sets flag "LIBSSH2_FLAG_SIGPIPE". See "flag".
133
134   banner ( text )
135       Set the SSH2 banner text sent to the remote host (prepends required
136       "SSH-2.0-").
137
138   version
139       In scalar context, returns libssh2 version/patch e.g. 0.18 or
140       "0.18.0-20071110".  In list context, returns that version plus the
141       numeric version (major, minor, and patch, each encoded as 8 bits, e.g.
142       0x001200 for version 0.18) and the default banner text (e.g.
143       "SSH-2.0-libssh2_0.18.0-20071110").
144
145   error
146       Returns the last error code. In list context, returns (code, error
147       name, error string).
148
149       Note that the returned error value is only meaningful after some other
150       method indicates an error by returning false.
151
152   die_with_error ( [message] )
153       Calls "die" with the given message and the error information from the
154       object appended.
155
156       For instance:
157
158         $ssh2->connect("ajhkfhdklfjhklsjhd", 22)
159             or $ssh2->die_with_error;
160         # dies as:
161         #    Unable to connect to remote host: Invalid argument (-1 LIBSSH2_ERROR_SOCKET_NONE)
162
163   sock
164       Returns a reference to the underlying IO::Socket object (usually a
165       derived class as IO::Socket::IP or IO::Socket::INET), or "undef" if not
166       yet connected.
167
168   trace
169       Calls "libssh2_trace" with supplied bitmask. In order to enable all
170       tracing pass -1 as follows:
171
172           $ssh2->trace(-1);
173
174       A version of libssh2 compiled with tracing support is required.
175
176   timeout ( timeout_ms )
177       Enables a global timeout (in milliseconds) which will affect every
178       action (requires libssh2 1.2.9 or later).
179
180       By default, or if you set the timeout to zero, Net::SSH2 has no
181       timeout.
182
183       Note that timeout errors may leave the SSH connection in an
184       inconsistent state and further operations may fail or behave
185       incorrectly. Actually, some methods are able to recover after a timeout
186       error and others are not.
187
188       Don't hesitate to report any issue you encounter related to this so
189       that it can be fixed or at least, documented!
190
191   method ( type [, values... ] )
192       Sets or gets a method preference. For get, pass in the type only; to
193       set, pass in either a list of values or a comma-separated string.
194       Values can only be queried after the session is connected.
195
196       The following methods can be set or queried:
197
198       LIBSSH2_METHOD_KEX
199           Key exchange method names. Supported values:
200
201           diffie-hellman-group1-sha1
202               Diffie-Hellman key exchange with SHA-1 as hash, and Oakley
203               Group 2 (see RFC 2409).
204
205           diffie-hellman-group14-sha1
206               Diffie-Hellman key exchange with SHA-1 as hash, and Oakley
207               Group 14 (see RFC 3526).
208
209           diffie-hellman-group-exchange-sha1
210               Diffie-Hellman key exchange with SHA-1 as hash, using a
211               safe-prime/generator pair (chosen by server) of arbitrary
212               strength (specified by client) (see IETF draft secsh-dh-group-
213               exchange).
214
215       LIBSSH2_METHOD_HOSTKEY
216           Public key algorithms. Supported values:
217
218           ssh-dss
219               Based on the Digital Signature Standard (FIPS-186-2).
220
221           ssh-rsa
222               Based on PKCS#1 (RFC 3447).
223
224       LIBSSH2_METHOD_CRYPT_CS
225           Encryption algorithm from client to server. Supported algorithms:
226
227           aes256-cbc
228               AES in CBC mode, with 256-bit key.
229
230           rijndael-cbc@lysator.liu.se
231               Alias for aes256-cbc.
232
233           aes192-cbc
234               AES in CBC mode, with 192-bit key.
235
236           aes128-cbc
237               AES in CBC mode, with 128-bit key.
238
239           blowfish-cbc
240               Blowfish in CBC mode.
241
242           arcfour
243               ARCFOUR stream cipher.
244
245           cast128-cbc
246               CAST-128 in CBC mode.
247
248           3des-cbc
249               Three-key 3DES in CBC mode.
250
251           none
252               No encryption.
253
254       LIBSSH2_METHOD_CRYPT_SC
255           Encryption algorithm from server to client. See the
256           "LIBSSH2_METHOD_CRYPT_CS" entry above for supported algorithms.
257
258       LIBSSH2_METHOD_MAC_CS
259           Message Authentication Code (MAC) algorithms from client to server.
260           Supported values:
261
262           hmac-sha1
263               SHA-1 with 20-byte digest and key length.
264
265           hmac-sha1-96
266               SHA-1 with 20-byte key length and 12-byte digest length.
267
268           hmac-md5
269               MD5 with 16-byte digest and key length.
270
271           hmac-md5-96
272               MD5 with 16-byte key length and 12-byte digest length.
273
274           hmac-ripemd160
275               RIPEMD-160 algorithm with 20-byte digest length.
276
277           hmac-ripemd160@openssh.com
278               Alias for hmac-ripemd160.
279
280           none
281               No encryption.
282
283       LIBSSH2_METHOD_MAC_SC
284           Message Authentication Code (MAC) algorithms from server to client.
285           See LIBSSH2_METHOD_MAC_CS for supported algorithms.
286
287       LIBSSH2_METHOD_COMP_CS
288           Compression methods from client to server. Supported values:
289
290           zlib
291               The "zlib" compression method as described in RFC 1950 and RFC
292               1951.
293
294           none
295               No compression
296
297       LIBSSH2_METHOD_COMP_SC
298           Compression methods from server to client. See
299           LIBSSH2_METHOD_COMP_CS for supported compression methods.
300
301   connect ( handle | host [, port])
302       The argument combinations accepted are as follows:
303
304       a glob or "IO::*" object reference
305           Note that tied file handles are not acceptable. The underlying
306           libssh2 requires real file handles.
307
308       host [, port]
309           In order to handle IPv6 addresses the optional module
310           IO::Socket::IP is required.
311
312           The port number defaults to 22.
313
314       This method used to accept a "Timeout" argument. That feature has been
315       replaced by the constructor "timeout" option but note that it takes
316       milliseconds instead of seconds!
317
318   disconnect ( [description [, reason [, language]]] )
319       Sends a clean disconnect message to the remote server. Default values
320       are empty strings for description and language, and
321       "SSH_DISCONNECT_BY_APPLICATION" for the reason.
322
323   hostname
324       The name of the remote host given at connect time or retrieved from the
325       TCP layer.
326
327   port
328       The port number of the remote SSH server.
329
330   hostkey_hash ( hash type )
331       Returns a hash of the host key; note that the key is raw data and may
332       contain nulls or control characters.
333
334       The type may be as follows:
335
336       LIBSSH2_HOSTKEY_HASH_MD5
337           MD5 hash, 16 bytes long (requires libssh2 compiled with MD5
338           support).
339
340       LIBSSH2_HOSTKEY_HASH_SHA1
341           SHA1 hash, 20 bytes long.
342
343       Note: in previous versions of the module this method was called
344       "hostkey".
345
346   remote_hostkey
347       Returns the public key from the remote host and its type which is one
348       of "LIBSSH2_HOSTKEY_TYPE_RSA", "LIBSSH2_HOSTKEY_TYPE_DSS", or
349       "LIBSSH2_HOSTKEY_TYPE_UNKNOWN".
350
351   check_hostkey( [policy, [known_hosts_path [, comment] ] ] )
352       Looks for the remote host key inside the given known host file
353       (defaults to "~/.ssh/known_hosts").
354
355       On success, this method returns the result of the call done under the
356       hood to "Net::SSH2::KnownHost::check" (i.e.
357       "LIBSSH2_KNOWNHOST_CHECK_MATCH", "LIBSSH2_KNOWNHOST_CHECK_FAILURE",
358       "LIBSSH2_KNOWNHOST_CHECK_NOTFOUND" or
359       "LIBSSH2_KNOWNHOST_CHECK_MISMATCH").
360
361       On failure it returns "undef".
362
363       The accepted policies are as follows:
364
365       LIBSSH2_HOSTKEY_POLICY_STRICT
366           Only host keys already present in the known hosts file are
367           accepted.
368
369           This is the default policy.
370
371       LIBSSH2_HOSTKEY_POLICY_ASK
372           If the host key is not present in the known hosts file, the user is
373           asked if it should be accepted or not.
374
375           If accepted, the key is added to the known host file with the given
376           comment.
377
378       LIBSSH2_HOSTKEY_POLICY_TOFU
379           Trust On First Use: if the host key is not present in the known
380           hosts file, it is added there and accepted.
381
382       LIBSSH2_HOSTKEY_POLICY_ADVISORY
383           The key is always accepted, but it is never saved into the known
384           host file.
385
386       callback
387           If a reference to a subroutine is given, it is called when the key
388           is not present in the known hosts file or a different key is found.
389           The arguments passed to the callback are the session object, the
390           matching error ("LIBSSH2_KNOWNHOST_CHECK_FAILURE",
391           "LIBSSH2_KNOWNHOST_CHECK_NOTFOUND" or
392           "LIBSSH2_KNOWNHOST_CHECK_MISMATCH") and the comment.
393
394   auth_list ( [username] )
395       Returns the authentication methods accepted by the server. In scalar
396       context the methods are returned as a comma separated string.
397
398       When the server accepted an unauthenticated session for the given
399       username, this method returns "undef" but "auth_ok" returns true.
400
401   auth_ok
402       Returns true when the session is authenticated.
403
404   auth_password ( username [, password [, callback ]] )
405       Authenticates using a password.
406
407       If the password has expired, if a callback code reference was given,
408       it's called as "callback($self, $username)" and should return a
409       password.  If no callback is provided, LIBSSH2_ERROR_PASSWORD_EXPIRED
410       is returned.
411
412   auth_password_interact ( username [, callback])
413       Prompts the user for the password interactively (requires
414       Term::ReadKey).
415
416   auth_publickey ( username, publickey_path, privatekey_path [, passphrase ]
417       )
418       Authenticate using the given private key and an optional passphrase.
419
420       When libssh2 is compiled using OpenSSL as the crypto backend, passing
421       this method "undef" as the public key argument is acceptable (OpenSSL
422       is able to extract the public key from the private one).
423
424       See also "Supported key formats".
425
426   auth_publickey_frommemory ( username, publickey_blob, privatekey_blob [,
427       passphrase ] )
428       Authenticate using the given public/private key and an optional
429       passphrase. The keys must be PEM encoded (requires libssh2 1.6.0 or
430       later with the OpenSSL backend).
431
432   auth_hostbased ( username, publickey, privatekey, hostname, [, local
433       username [, passphrase ]] )
434       Host-based authentication using an optional passphrase. The local
435       username defaults to be the same as the remote username.
436
437   auth_keyboard ( username, password | callback )
438       Authenticate using "keyboard-interactive". Takes either a password, or
439       a callback code reference which is invoked as "callback->(self,
440       username, name, instruction, prompt...)" (where each prompt is a hash
441       with "text" and "echo" keys, signifying the prompt text and whether the
442       user input should be echoed, respectively) which should return an array
443       of responses.
444
445       If only a username is provided, the default callback will handle
446       standard interactive responses (requires Term::ReadKey)
447
448   auth_agent ( username )
449       Try to authenticate using an SSH agent (requires libssh2 1.2.3).
450
451   auth ( ... )
452       This is a general, prioritizing authentication mechanism that can use
453       any of the previous methods. You provide it some parameters and
454       (optionally) a ranked list of methods you want considered (defaults to
455       all). It will remove any unsupported methods or methods for which it
456       doesn't have parameters (e.g. if you don't give it a public key, it
457       can't use publickey or hostkey), and try the rest, returning whichever
458       one succeeded or "undef" if they all failed. If a parameter is passed
459       with an "undef" value, a default value will be supplied if possible.
460
461       The parameters are:
462
463       rank
464           An optional ranked list of methods to try.  The names should be the
465           names of the Net::SSH2 "auth" methods, e.g. "keyboard" or
466           "publickey", with the addition of "keyboard-auto" for automated
467           "keyboard-interactive" and "password-interact" which prompts the
468           user for the password interactively.
469
470       username
471       password
472       publickey
473       privatekey
474           "privatekey" and "publickey" are file paths.
475
476       passphrase
477       hostname
478       local_username
479       interact
480           If this option is set to a true value, interactive methods will be
481           enabled.
482
483       fallback
484           If a password is given but authentication using it fails, the
485           module will fall back to ask the user for another password if this
486           parameter is set to a true value.
487
488       cb_keyboard
489           auth_keyboard callback.
490
491       cb_password
492           auth_password callback.
493
494       For historical reasons and in order to maintain backward compatibility
495       with older versions of the module, when the "password" argument is
496       given, it is also used as the passphrase (and a deprecation warning
497       generated).
498
499       In order to avoid that behaviour the "passphrase" argument must be also
500       passed (it could be "undef"). For instance:
501
502         $ssh2->auth(username => $user,
503                     privatekey => $privatekey_path,
504                     publickey => $publickey_path,
505                     password => $password,
506                     passphrase => undef);
507
508       This work around will be removed in a not too distant future version of
509       the module.
510
511   flag (key, value)
512       Sets the given session flag.
513
514       The currently supported flag values are:
515
516       LIBSSH2_FLAG_COMPRESS
517           If set before the connection negotiation is performed, compression
518           will be negotiated for this connection.
519
520           Compression can also be enabled passing option "compress" to the
521           constructor new.
522
523       LIBSSH2_FLAG_SIGPIPE
524           if set, Net::SSH2/libssh2 will not attempt to block SIGPIPEs but
525           will let them trigger from the underlying socket layer.
526
527   keepalive_config(want_reply, interval)
528       Set how often keepalive messages should be sent.
529
530       "want_reply" indicates whether the keepalive messages should request a
531       response from the server. "interval" is number of seconds that can pass
532       without any I/O.
533
534   keepalive_send
535       Send a keepalive message if needed.
536
537       On failure returns undef. On success returns how many seconds you can
538       sleep after this call before you need to call it again.
539
540       Note that the underlying libssh2 function "libssh2_keepalive_send" can
541       not recover from EAGAIN errors. If this method fails with such error,
542       the SSH connection may become corrupted.
543
544       The usage of this function is discouraged.
545
546   channel ( [type, [window size, [packet size]]] )
547       Creates and returns a new channel object. See Net::SSH2::Channel.
548
549       Type, if given, must be "session" (a reminiscence of an old, more
550       generic, but never working wrapping).
551
552   tcpip ( host, port [, shost, sport ] )
553       Creates a TCP connection from the remote host to the given host:port,
554       returning a new channel.
555
556       The "shost" and "sport" arguments are merely informative and passed to
557       the remote SSH server as the origin of the connection. They default to
558       127.0.0.1:22.
559
560       Note that this method does not open a new port on the local machine and
561       forwards incoming connections to the remote side.
562
563   listen ( port [, host [, bound port [, queue size ]]] )
564       Sets up a TCP listening port on the remote host.  Host defaults to
565       0.0.0.0; if bound port is provided, it should be a scalar reference in
566       which the bound port is returned. Queue size specifies the maximum
567       number of queued connections allowed before the server refuses new
568       connections.
569
570       Returns a new Net::SSH2::Listener object.
571
572   scp_get ( remote_path [, local_path ] )
573       Retrieve a file with SCP. Local path defaults to basename of remote.
574
575       Alternatively, "local_path" may be an already open file handle or an
576       IO::Handle object (e.g. IO::File, IO::Scalar).
577
578   scp_put ( local_path [, remote_path ] )
579       Send a file with SCP. Remote path defaults to same as local.
580
581       Alternatively, "local_path" may be an already open file handle or a
582       reference to a IO::Handle object (it must have a valid stat method).
583
584   sftp
585       Return SecureFTP interface object (see Net::SSH2::SFTP).
586
587       Note that SFTP support in libssh2 is pretty rudimentary. You should
588       consider using Net::SFTP::Foreign with the Net::SSH2 backend
589       Net::SFTP::Foreign::Backend::Net_SSH2 instead.
590
591   public_key
592       Return public key interface object (see Net::SSH2::PublicKey).
593
594   known_hosts
595       Returns known hosts interface object (see Net::SSH2::KnownHosts).
596
597   poll ( timeout, arrayref of hashes )
598       Deprecated: the poll functionality in libssh2 is deprecated and its
599       usage disregarded. Session methods "sock" and "block_directions" can be
600       used instead to integrate Net::SSH2 inside an external event loop.
601
602       Pass in a timeout in milliseconds and an arrayref of hashes with the
603       following keys:
604
605       handle
606           May be a Net::SSH2::Channel or Net::SSH2::Listener object, integer
607           file descriptor, or perl file handle.
608
609       events
610           Requested events.  Combination of LIBSSH2_POLLFD_* constants (with
611           the POLL prefix stripped if present), or an arrayref of the names
612           ('in', 'hup' etc.).
613
614       revents
615           Returned events.  Returns a hash with the (lowercased) names of the
616           received events ('in', 'hup', etc.) as keys with true values, and a
617           "value" key with the integer value.
618
619       Returns undef on error, or the number of active objects.
620
621   block_directions
622       Get the blocked direction after some method returns
623       "LIBSSH2_ERROR_EAGAIN".
624
625       Returns "LIBSSH2_SESSION_BLOCK_INBOUND" or/and
626       "LIBSSH2_SESSION_BLOCK_OUTBOUND".
627
628   debug ( state )
629       Class method (affects all Net::SSH2 objects).
630
631       Pass 1 to enable, 0 to disable. Debug output is sent to "STDERR".
632
633   blocking ( flag )
634       Enable or disable blocking.
635
636       A good number of the methods in "Net::SSH2"/"libssh2" can not work in
637       non-blocking mode. Some of them may just forcibly enable blocking
638       during its execution. A few may even corrupt the SSH session or crash
639       the program.
640
641       The ones that can be safely called are "read" and, with some caveats,
642       "write". See "write" in Net::SSH2::Channel.
643
644       Don't hesitate to report any bug you found in that area!
645

INTEROPERABILITY AND OTHER KNOWN ISSUES

647   Protocol versions
648       The underlying "libssh2" library does support version 2 of the SSH
649       protocol exclusively (hopefully, version 1 usage is almost extinct.)
650
651       The SFTP client implements version 3 of the SFTP protocol.
652
653   Key formats
654       Private and public keys can be generated and stored using different
655       formats and cyphers. Which ones are accepted by "Net::SSH2" depends on
656       the libssh2 version being used and of the underlying crypto backend it
657       was configured to use at build time (OpenSSL "libssl" or "libgcrypt").
658
659       An increasingly common problem is that OpenSSH since version 7.8
660       (released 2018-8-24) generates keys by default using the format RFC4716
661       which is not supported by the default crypto backend ("libssl").
662
663       Keys can be converted inplace to the old PEM format using ssh-keygen(1)
664       as follows:
665
666         $ ssh-keygen -p -m PEM -N "" -f ~/.ssh/id_rsa
667
668       On Windows, PuTTYgen (which is part of the PuTTY distribution) can be
669       used to convert keys.
670
671       Another common issue is that in the last years OpenSSH has incorporated
672       several new cyphers that are not supported by any version of "libssh2"
673       yet. Currently the best option from an interoperability standpoint is
674       probably to stick to RSA key usage.
675
676   Security
677       Nowadays "libssh2" development is not thrilling; new versions (even
678       minor ones) are being released just every two or three years. On the
679       other hand security issues are found and reported far more frequently.
680       That means that "Net::SSH2"/"libssh2" could be an easy attack vector.
681
682       So, Net::SSH2 should be used only in trusted environments. More
683       specifically, using it to connect to untrusted third party computers
684       over the Internet is probably a very bad idea!
685

SEE ALSO

687       Net::SSH2::Channel, Net::SSH2::Listener, Net::SSH2::SFTP,
688       Net::SSH2::File, Net::SSH2::Dir.
689
690       LibSSH2 documentation at <http://www.libssh2.org>.
691
692       IETF Secure Shell (secsh) working group at
693       <http://www.ietf.org/html.charters/secsh-charter.html>.
694
695       Net::SSH::Any and Net::SFTP::Foreign integrate nicely with Net::SSH2.
696
697       Other Perl modules related to SSH you may find interesting:
698       Net::OpenSSH, Net::SSH::Perl, Net::OpenSSH::Parallel,
699       Net::OpenSSH::Compat.
700
702       Copyright (C) 2005 - 2010 by David B. Robins (dbrobins@cpan.org).
703
704       Copyright (C) 2010 - 2020 by Rafael Kitover (rkitover@cpan.org).
705
706       Copyright (C) 2011 - 2020 by Salvador FandiƱo (salva@cpan.org).
707
708       All rights reserved.
709
710       This library is free software; you can redistribute it and/or modify it
711       under the same terms as Perl itself, either Perl version 5.8.0 or, at
712       your option, any later version of Perl 5 you may have available.
713
714
715
716perl v5.36.0                      2023-01-20                      Net::SSH2(3)
Impressum