1BZFS(6)                             BZFlag                             BZFS(6)
2
3
4

NAME

6       bzfs - BZFlag game server
7

SYNOPSIS

9       bzfs  [-a linear angular] [-adminlagannounce milliseconds] [-admsg mes‐
10       sage] [-advertise groupname[,groupname]...]   [-autoTeam]  [-b]  [-bad‐
11       words  badwordfile] [-ban ip[,ip]...]  [-banfile filename] [-c] [-cache
12       worldCacheURL]  [-cacheout  filename]  [-conf  configfile]  [-cr]  [-d]
13       [-density   num]   [-disableBots]   [+f   {good  |  bad  |  team  |   |
14       flag-id}[{count}]] [-f {good | bad | flag-id}] [-fb] [-filterCallsigns]
15       [-filterChat]  [-filterSimple]  [-g]  [-gndtex  texture-name] [-groupdb
16       file] [-h] [-handicap] [-help] [-helpmsg file name] [-i interface] [-j]
17       [-jitterdrop  warn-count] [-jitterwarn milliseconds] [-lagannounce mil‐
18       liseconds] [-lagdrop warn-count] [-lagwarn  milliseconds]  [-loadplugin
19       name[,options]]  [-masterBanURL  URL] [-maxidle seconds] [-mp {count  |
20       [rogue-count],  [red-count],  [green-count],   [blue-count],   [purple-
21       count],   [observer-count]}]   [-mps   max-score]   [-ms  shots]  [-mts
22       max-score] [-noMasterBanlist]  [-noradar]  [-noTeamKills]  [-offa]  [-p
23       port]  [-packetlossdrop  warn-count] [-packetlosswarn percent] [-passwd
24       password]  [-pidfile  filename]  [-poll  variable=value]  [-printscore]
25       [-publictitle  description]  [-publicaddr  address[:port]] [-publiclist
26       url] [-publickey key] [-q] [+r] [-rabbit [score  |  killer  |  random]]
27       [-recbuf size] [-recbufonly] [-recdir directory] [-replay] [-reportfile
28       filename] [-reportpipe command] [+s flag-count] [-s  flag-count]  [-sa]
29       [-sb] [-set name value] [-setforced name value] [-sl id num] [-spamtime
30       time] [-spamwarn warnLimit] [-speedtol factor] [-srvmsg  message]  [-st
31       time]   [-sw   count]   [-synclocation]  [-synctime]  [-t]  [-tftimeout
32       time-limit] [-time  {time-limit  |  ending-time}]  [-timemanual]  [-tk]
33       [-tkannounce]  [-tkkr  percent]  [-ts  [micros]] [-UPnP] [-userdb file]
34       [-vars file] [-version] [-world world-file] [-worldsize world size]
35
36

DESCRIPTION

38       Bzfs is the server for BZFlag, and it must be running to play.  It  can
39       be run on any system on the network (including a player's system or one
40       without graphics).  Terminating  the  server  terminates  the  game  in
41       progress.
42
43

OPTIONS

45       -a linear angular
46                      Sets  the maximum linear and angular accelerations.  The
47                      units are somewhat arbitrary so you'll have  to  experi‐
48                      ment  to  find suitable values. Positive values will set
49                      limits to the acceleration and lower they  are,  greater
50                      is  the inertia.  Zero or negative values disable accel‐
51                      eration limits.
52
53       -adminlagannounce milliseconds
54                      Announce players that lag more than milliseconds to  ad‐
55                      mins.
56
57       -admsg message Define  a message which will be broadcast to all players
58                      every 15 minutes.  This  option  can  be  used  multiple
59                      times to define a multiline message.
60
61       -advertise groupname,groupname,...
62                      Allows  control of who can see this server on the server
63                      list.  Use: -advertise NONE to make a private server (no
64                      one will see the server, but global logins can be used).
65                      The default, if -advertise is not specified, is to allow
66                      everyone to see the server.  Otherwise, your server will
67                      only be listed to members of the groups which you  spec‐
68                      ify, eg: -advertise JOE,BOB.
69
70       -autoTeam      Automatically  assign players to teams when they connect
71                      so that there are an equal  number  of  players  on  all
72                      available  teams.  Players are placed on teams that have
73                      the fewest players; otherwise they will be placed on the
74                      weakest  team.  Weakest team is the team with the lowest
75                      combined kill ratio.
76
77       -b             When -c is supplied, this option  randomly  rotates  the
78                      buildings.
79
80       -badwords badwordfile
81                      Specify a file that contains bad words that will be used
82                      when either -filterCallsigns or -filterChat is enabled.
83
84       -ban ip[,ip]...
85                      Prohibits connections  from  the  listed  IP  addresses.
86                      Trailing 255 bytes are treated as mask bytes.
87
88       -banfile filename
89                      Specifies  the  name of a file where bzfs will store the
90                      banlist. It will load the banlist from this file when it
91                      starts  (if the file exists), and write the banlist back
92                      to the file when someone gets banned  or  unbanned.   If
93                      this option isn't given the banlist will not be saved.
94
95       -c             Enables the capture-the-flag style game. By default this
96                      allocates one team flag per team.  This can be  modified
97                      see +f team. By default, the free-for-all style is used.
98
99       -cache worldCacheURL
100                      Specifies  the  URL  for the world cache file. This is a
101                      binary file that clients will attempt to download before
102                      getting the world from the bzfs server.
103
104       -cacheout filename
105                      Save  the  currently specified world into a binary cache
106                      file and exit.
107
108       -conf configfilename
109                      Specifies the name of a configuration file to be used to
110                      set all of the bzfs options, rather than setting them on
111                      the command line.
112
113       -cr            Enables the capture-the-flag style game with random map.
114                      You can optionally specify a building density by provid‐
115                      ing a number (default is 5).  One team flag per team  is
116                      provided,  but  more  can be added thru +f team.  By de‐
117                      fault, the free-for-all style is used.
118
119       -d             Increase debugging level. If more -d is given, more  de‐
120                      bugging info is obtained.
121
122       -density num   Specify density for buildings, i.e. the higher the inte‐
123                      ger number, the more buildings you will  get.  This  ap‐
124                      plies to automatically generated maps only.
125
126       -disableBots   Disallow  clients from using the ROGER autopilot or from
127                      using robots.
128
129       +f {good | bad | teamflag-id}[{count}]
130                      Forces the existence of the given  flag.   If  specified
131                      multiple  times  for  the  same  flag-id, then that many
132                      flags will appear.  The good argument is  equivalent  to
133                      specifying +f once for each kind of good flag. Same goes
134                      for the bad argument.  The team  argument  adds  a  team
135                      flag  to each team, assuming that the game style is cap‐
136                      ture the flag. The optional {count} parameter allows the
137                      specification  of  multiple flags of the same type. Note
138                      that the curly braces are required.
139
140       -f {good | bad | flag-id}
141                      Disallows random flags  of  the  given  type.   Required
142                      flags  given  by  the +f option are still provided.  The
143                      bad argument is equivalent to  specifying  -f  once  for
144                      each  kind  of  bad  flag.   Same goes for good, but you
145                      probably do not want to do that.
146                      An example of running a server with 40 to 50  flags  ex‐
147                      cept  genocide  would be "+s 40 -s 50 -f G".  Similarly,
148                      "+f good{40} +f bad{10} -f G{40}" would give you exactly
149                      40 good flags except genocide and 10 of each bad flag.
150
151       -fb            Allow flags on box buildings.
152
153       -filterCallsigns
154                      Turn  on  the  filtering of callsigns and mottos.  Call‐
155                      signs and mottos are compared against bad words provided
156                      via -badwords.
157
158       -filterChat    Turn  on  the filtering of chat messages.  Messages that
159                      contain words listed via a -badwords file  are  replaced
160                      with !@#$%^&* characters.
161
162       -filterSimple  By  default,  all filtering is aggressive, matching much
163                      more than what is strictly listed in  a  -badwords  file
164                      for  convenience.   Providing  this option will make the
165                      -filterCallsigns and -filterChat comparisons exact match
166                      only.
167
168       -g             Quit after serving one game.
169
170       -gndtex texture-name
171                      Specify the name of the ground texture.
172
173       -groupdb file  Load groups from file
174
175       -h             Buildings are given random heights.
176
177       -handicap      Players  are  given  a handicap advantage based on their
178                      ability in relation to the  other  players.  Handicapped
179                      players  will  have faster tanks and shots. The handicap
180                      is determined by the player's score in relation to other
181                      players.
182
183       -help          Shows a help page and lists all the valid flag id's.
184
185       -helpmsg file name
186                      Provide  a message accessible by /help name, which sends
187                      no more than the first 50 lines of file to the player.
188
189       -i interface   Server will listen for and respond  to  ``pings''  (sent
190                      via broadcast) on the given interface.  Clients use this
191                      to find active servers  on  the  network.  This  is  the
192                      TCP/UDP/IP address the server will listen on.
193
194       -j             Allows jumping.
195
196       -jitterdrop warn-count
197                      Kicks players after warn-count jitter warnings.
198
199       -jitterwarn milliseconds
200                      Send warnings to players that jitter more than millisec‐
201                      onds.
202
203       -lagannounce milliseconds
204                      Announce players that lag more than milliseconds in pub‐
205                      lic.
206
207       -lagdrop warn-count
208                      Kicks players after warn-count lag warnings.
209
210       -lagwarn milliseconds
211                      Send  warnings  to  players that lag more than millisec‐
212                      onds.
213
214       -loadplugin name[,options]
215                      Load the specified plugin. name can either be  the  name
216                      of  the  plugin,  or a path to its library file. Option‐
217                      ally, you can provide any options the plugin requires.
218
219       -masterBanURL URL
220                      Specify alternate URLs for the master  ban  file  to  be
221                      pulled  from.   This  argument  may be provided multiple
222                      times.
223
224       -maxidle seconds
225                      Kick players that did  not  play  longer  than  seconds.
226                      Pausing  players  are  not kicked. If a player uttered a
227                      word recently, he will be kicked after thrice the  given
228                      time.
229
230       -mp {count | [rogue],[red],[green],[blue],[purple],[observer]}
231                      Sets  the  maximum number of players, total or per team.
232                      A single value sets the total number of players allowed.
233                      Five  comma  separated  values  set the maximum for each
234                      team.  If a count is left blank then no limit is set for
235                      that  team,  except for the limit on the total number of
236                      players.  Both forms may be provided.  For rabbit chase,
237                      the  "rogue" value sets the total number of non-observer
238                      player, and all other values must be zero.
239
240       -mps max-score Sets a maximum score for individual players.  The  first
241                      player  to  reach  this score is declared the winner and
242                      the game is over.
243
244       -ms shots      Allows up to shots simultaneous shots for  each  player.
245                      This is 1 by default.
246
247       -mts max-score Sets a maximum score for teams.  The first team to reach
248                      this score is declared the winner and the game is over.
249
250       -noMasterBanlist
251                      Server will not attempt to load the master ban list from
252                      the internet.
253
254       -noradar       Disable the use of the radar.
255
256       -noTeamKills   Players  on  the  same  team  are immune to each other's
257                      shots. Rogue is excepted.
258
259       -offa          Enables the Open-Free-for-All  style  game.  This  is  a
260                      teamless  mode,  similar  to  the  classic deathmatch in
261                      other games.
262
263       -p port        Listen for game connections on port instead of  the  de‐
264                      fault port.  Use -help to print the default port, or use
265                      -d debug printing.
266
267       -packetlossdrop warn-count
268                      Kicks players after warn-count packetloss warnings.
269
270       -packetlosswarn percent
271                      Send warnings to players that have more more  than  per‐
272                      cent loss.
273
274       -passwd password
275                      Specify  a  server administrator password for use in re‐
276                      mote administration such as  /kick,  /ban,  /mute,  etc.
277                      messages.
278
279       -pidfile filename
280                      Specify  a  file where the server will write its process
281                      ID so it may be used for remote administration.
282
283       -poll variable=value
284                      Configure several aspects of the in-game polling system
285
286                      banTime
287                             default number of minutes player should be banned
288                             (unspecified, the  default is 300)
289
290                      vetoTime
291                             max  seconds  authorized  user  has to abort poll
292                             (default is 20)
293
294                      votePercentage
295                             percentage of players required to affirm  a  poll
296                             (unspecified, the default is 50.1%)
297
298                      voteRepeatTime
299                             minimum  seconds required before a player may re‐
300                             quest another vote (default is 300)
301
302                      votesRequired
303                             minimum number of additional  votes  required  to
304                             make a vote valid (default is 2)
305
306                      voteTime
307                             maximum  amount  of  time  player has to vote, in
308                             seconds (default is 60)
309
310       -printscore    Write score to stdout whenever it changes
311
312       -publictitle description
313                      Advertise this server on the internet with the given de‐
314                      scription.   By default, a server will respond to broad‐
315                      cast queries, allowing clients to find  servers  running
316                      on  the standard port on the local subnet.  The -public‐
317                      title option causes the server to register itself with a
318                      list  server,  which  clients can query to get a list of
319                      bzfs servers.
320
321       -publicaddr address[:port]
322                      Advertise this server with the given address  and  port.
323                      Normally a server advertises itself at the local address
324                      and port.  Some servers are not accessible from the  in‐
325                      ternet  at  this  address  (for example servers behind a
326                      firewall using Network Address Translation).   Use  this
327                      option  to specify the address and/or port that internet
328                      users should use to access this server.
329
330       -publiclist url
331                      Advertise this server on the list servers listed at url.
332                      Only  has  an  effect when used with -publictitle and/or
333                      -publicaddr.  A built-in url is used  by  default.   The
334                      BZFlag clients use the same built-in url so, by default,
335                      clients will see public servers automatically.  This ar‐
336                      gument  may  be  provided  multiple times to publicize a
337                      server to multiple list servers.
338
339       -publickey key Advertise this server on the list  server(s)  using  the
340                      specified  key.  Only has an effect when used with -pub‐
341                      lictitle and/or -publicaddr.
342
343       -q             If specified, the server will not listen for nor respond
344                      to  ``pings''.  BZFlag sends out these pings to give the
345                      user a list  of  available  servers.   This  effectively
346                      makes the server private, especially if the -p option is
347                      also used.
348
349       +r             Makes most shots ricochet.  Super bullets, shock  waves,
350                      and guided missiles do not.
351
352       -rabbit [score | killer | random]
353                      Enables  the  rabbit-chase  style game.  By default, the
354                      free-for-all style is used.  You must specify the  algo‐
355                      rithm  used  to pick a new rabbit when the old one dies.
356                      The score algorithm uses a  modified  wins/(wins+losses)
357                      score  and  picks  the  top scoring player to be the new
358                      rabbit.  The killer algorithm specifies  a  reverse  tag
359                      game  where  whomever  kills  the rabbit becomes the new
360                      rabbit.  The random algorithm randomly picks a new  rab‐
361                      bit  without  regard  to score.  (The score algorithm is
362                      the original behavior.)
363
364       -recbuf size   Start with the recording buffer active, with the  speci‐
365                      fied size (in megabytes).
366
367       -recbufonly    Disable recording straight to files
368
369       -recdir directory
370                      Specify the directory for record and replay files.
371
372       -replay        Start the server in replay mode.
373
374       -reportfile filename
375                      Write  messages  to  the  server admin written using the
376                      /report command to this file. If neither -reportfile  or
377                      -reportpipe  is  used  the  /report command will be dis‐
378                      abled.
379
380       -reportpipe command
381                      Pipe messages to the server admin written using the /re‐
382                      port  command to this program or shell command. See -re‐
383                      portfile.
384
385       +s num-flags   The server will have an  extra  num-flags  random  super
386                      flags available at all times.  The -f option can be used
387                      to restrict which types of flags  will  be  added.   Re‐
388                      quired  flags given by the +f option are not included in
389                      the num-flags total.
390
391       -s num-flags   The server will have up to num-flags random super  flags
392                      available at any time.  The -f option can be used to re‐
393                      strict which types of flags  will  be  added.   Required
394                      flags  given  by  the  +f option are not included in the
395                      num-flags total.
396
397       -sa            Antidote flags are provided for players with bad flags.
398
399       -sb            Allow spawns on box buildings.
400
401       -set name value
402                      Set BZDB variable name to value.
403
404       -setforced name value
405                      Set BZDB variable name to value, even  if  the  variable
406                      does not exist.
407
408       -sl id num     Restrict flag id to num shots.
409
410       -spamtime time Minimum  time  between  player  chat  messages  that are
411                      alike.
412
413       -spamwarn warnLimit
414                      Number of warnings a player/spammer gets, who   violates
415                      -spamtime.
416
417       -speedtol factor
418                      Override  the default speed auto kick factor. The factor
419                      should not be less then 1.0. The factor is a multiplier.
420
421       -srvmsg message
422                      Define a server welcome message. This option can be used
423                      multiple times to define a multiline message.
424
425       -st time       Bad flags are automatically dropped after time seconds.
426
427       -sw count      Bad  flags  are  automatically dropped after count wins.
428                      Capturing a team flag does not count as a win.
429
430       -synclocation  Forces all clients to use the same  location  (longitude
431                      and latitude).
432
433       -synctime      Forces  all  clients  to  use the same time of day.  The
434                      current time is determined by the server's clock.   This
435                      disables the + and - keys on the clients.
436
437       -t             Adds teleporters to the game.
438
439       -tftimeout time-limit
440                      If  the  last player in a team leaves while someone else
441                      is carrying the team flag, the team flag will not  reset
442                      until  it  is captured, or until the player drops it and
443                      it is left alone for some time.  This  option  specifies
444                      the number of seconds that the flag should be left alone
445                      before it is reset. The default value is 30.
446
447       -time {time-limit | ending-time}
448                      Sets a time limit on the game to time-limit  or  ending-
449                      time.  The game will be stopped time-limit seconds after
450                      the first player connects, or at ending-time,  whichever
451                      is  given.  The  ending-time should be given in hh:mm:ss
452                      format, but does not need minute and  second  arguments.
453                      If only hour is given, it must end in ':'. Each unspeci‐
454                      fied argument is set to 0.
455
456       -timemanual    When using -time, the  countdown  will  start  when  the
457                      first  player joins. With -timemanual, the countdown has
458                      to be started manually  using  the  /countdown  command.
459                      This is useful for matches.
460
461       -tk            Changes the default behavior where a player dies when he
462                      kills a teammate.  When using this option, he will  just
463                      get a -1 score penalty for the kill but not be killed in
464                      game.
465
466       -tkannounce    Announce teamkills to the admin channel.
467
468       -tkkr percent  Kicks players whose team killing to normal kill ratio is
469                      greater than percent [1-100]. A start up grace period is
470                      given to players.
471
472       -ts [micros]   Include timestamp information in DEBUG output  —  useful
473                      for  logging.  If micros is specified, microseconds will
474                      be added to the timestamp.
475
476       -UPnP          If enabled during build, bzfs try  to  communicate  with
477                      the  Gateway to set Port Forwarding and to supply infor‐
478                      mation not specified with -i (local interface) and -pub‐
479                      licaddr
480
481       -userdb file   Load group associations from file
482
483       -vars file     Loads  values for game configurable variables from file.
484                      Entries are one per  line  in  the  form:  set  variable
485                      value. For a list of variables that are configurable, in
486                      the BZFlag client, send a message with /set as the text.
487
488       -version       Prints the version number of the executable.
489
490       -world world-file
491                      Reads a specific BZFlag .bzw world layout file  for  the
492                      game map.
493
494       -worldsize world-size
495                      Changes the size for random maps
496
497   Notes
498       The  server  uses nearly zero CPU time when nobody is playing, and even
499       during a game the server uses very little CPU, so it's not a burden  on
500       the  system  to  leave one running and it won't interfere with a player
501       using the same system (except on Windows 95, which really sucks at mul‐
502       titasking).   The  server  will continue to run until terminated.  If a
503       game is in progress when the server goes  down,  all  players  will  be
504       kicked  off  and  the game will be aborted without warning.  The server
505       resets itself when all players have quit.  All players must quit to re‐
506       set the server when a game is over (because of a score or time limit).
507
508       The following game styles are recommended starting points.
509
510              -c [-b]        Basic capture-the-flag game.  It teaches teamwork
511                             and dogfighting skills.
512
513              -s -t          Free-for-all  with  superflags  and  teleporters.
514                             Teaches  players  how to use superflags and tele‐
515                             porters for maximum effect.  You may want to  al‐
516                             low  players  to  drop bad flags with any of -sa,
517                             -st, and -sw.
518
519       Notice that the maximum number of shots for these styles is one.   Hav‐
520       ing low shot counts can greatly increase general playability and learn‐
521       ing speed.  However, this is not always true of  every  game  style  or
522       game  world,  and a skilled player will learn to deal with a variety of
523       shot counts.  Single shot games have  additional  disadvantage  in  WAN
524       games  where  lag/jitter can cause unfair advantage.  Single shot, non-
525       Jump games will teach valuable lessons in dodging, however, and are ex‐
526       cellent starting points for the beginner.
527
528   Networking
529       Communication  between  the  server  and clients (i.e. between bzfs and
530       bzflag) during a game is via TCP and UDP.  Use the -help option to  get
531       the  server's  default  port.  If there's a firewall between the server
532       and client, the firewall must accept connections  from  the  client  to
533       this port and forward them to the server.
534
535       Clients  can  search for servers by sending broadcast UDP packets.  But
536       they must be on the same local area network for this to work.   Clients
537       can  also  find  servers advertised using -publictitle by querying list
538       servers.
539
540       Game information is relayed through the server. Some communication  be‐
541       tween  clients,  such  as position and orientation information, is nor‐
542       mally sent via UDP packets.  Other data, like flag grab and  kill  mes‐
543       sages, are sent to the server via TCP. The server then turns around and
544       broadcasts these packets  to all players. Since being in a game implies
545       connection  to  the  server, all players are guaranteed to get all mes‐
546       sages sent via TCP.  But the UDP packets may be  discarded.   If  other
547       players  can see your tank in the game but it never appears to move and
548       shots go through it, chances are high that your UDP connection  is  not
549       working.
550
551   Worlds
552       BZFlag worlds come in two varieties, randomly generated ones, and human
553       designed ones. By default, bzfs uses randomly  generated  world  unless
554       you  specify  the -world command line or configuration file option. The
555       world file specified by the -world option is a  text  based  file  that
556       contains  a  list of world objects. This file can be created using pro‐
557       grams found on github, or can be hand edited.  See  the  bzw(5)  manual
558       page for more details.
559
560
561

GENERAL SERVER COMMANDS

563       /clientquery [callsign]
564              Retrieve client version info from all users, or just CALLSIGN if
565              given. Example:
566              /clientquery MrApathyCream
567              MrApathyCream: Version: BZFlag 1.11.6-20040729-gnu-linux-SDL
568
569
570       /date, /time
571              Responds with the current server local time. /date and /time are exactly the same. Example:
572              Tuesday September 08 06:45:54 2004
573
574
575       /flaghistory
576              Lists what flags players have grabbed in the past. Example:
577              MrApathyCream: (<-) (->) (O) (CB) (M) (B) (JM) (WA)
578              Gerbol: (L) (GM) (L) (GM) (CL) (ST) (GM) (L)
579              captain_macgyver: (SB) (SW)
580
581
582       /idlestats
583              Displays the idle time in seconds for each player. A player is idle when
584              he is dead and has not respawned yet. Example:
585              MrApathyCream: 0s
586              Gerbol: 80s
587              captain_macgyver: 13s
588
589
590       /lagstats
591              Lists network delays, jitter and number of lost resp. out of order packets by player. Example:
592              MrApathyCream 335 +- 10ms
593              Gerbol 210 +- 3ms
594              captain_macgyver 155 +- 0ms  12% lost/ooo
595
596
597       /me action
598
599              This command displays an "action" that is conveyed to another player.  It allows
600              for a little more expressivity in the game.  For example: "/me is hunting wabbits"
601              turns into a message like "TimRiker is hunting wabbits" that gets displayed
602              differently to other players.
603
604
605       /msg "callsign" message
606
607              This command allows a player to send a message to another player.  Similar to using
608              the "," and "." message keys in the game and then selecting your recipient, this
609              will send some message to particular player.  The quotes are optional.
610
611
612       /part [message]
613              Leave the server with a goodbye message (similar to IRC's /part)
614              /part Gotta go! bye everyone!
615
616
617       /password password
618              Attempt to gain administrator status Example:
619              /password supersecretpassword
620              You are now an administrator!
621
622
623       /poll {{ban | kick} callsign | vote {yes | no} | veto}
624              Interact and make requests of the bzflag voting system via the /poll command.
625              The ban and kick subcommands request a vote to respectively ban or kick some
626              player.  The playername is expected as the next argument.  The vote and veto
627              commands behave identical to the /vote and /veto command counterparts,
628              expecting the same arguments in following.  By default, you must be registered
629              to request or vote on a poll, and an admin to veto.
630
631
632       /quit [message]
633              Quit the game with a goodbye message (similar to IRC's /quit)
634              /quit Gotta go! bye everyone!
635
636
637       /report message
638              Write a message to the server administrator. Example:
639              /report I like this map!
640
641
642       /uptime
643              Prints server's current running time in days, hours, mins and secs.
644
645
646       /vote {yes | no}
647              If there is a poll active, this command will place a vote in favor or in
648              opposition to the poll.  Multiple languages are supported as a vote argument
649              in addition to "yes" and "no".  By default, you must be registered to vote on
650              a poll.
651
652
653

SERVER ADMINISTRATIVE COMMANDS

655
656
657       /ban {ip | ipList | #slot | "Player Name" | playerName} duration reason
658
659              Ban players using the specified IPs for certain length  of  time
660              from using this server.  <duration> can be:
661                  'short' or 'default' for the default ban time
662                  'forever' or 'max' for infinite bans
663                  a time in the format <weeks>W<days>D<hours>H<minutes>M
664                  just a number of minutes
665
666              Examples:
667              /ban 35.23.43.66 2 cheating
668              bans player with specific ip for 2 minutes
669              /ban 35.23.*.*,47.23.17.* 0 Cheaters
670              bans all ips in this range forever
671              /ban 36.37.2.8 2h30m "ShootMe" was abusing players
672              bans specific ip for 2.5 hours with given reason
673              /ban #5 60m Rejoining
674              bans player using slot 5 for 60 minutes with given reason
675              /ban "Tanker" max cheating
676              bans the player Tanker forever because cheating
677
678              Note: Slots numbers are only displayed in admins clients.
679              Duration and reason are required.
680
681
682       /banlist
683              List all of the IPs currently banned from this server. Example:
684              /banlist
685              IP Ban List
686              ------------
687              35.23.43.66 (2 minutes) banned by Tankmaster
688                  reason: Cheaters
689              47.23.17.* banned by Tankslave
690
691
692       /checkip ip
693              Check whether the IP is banned and print the corresponding rule. This does not
694              cover hostbans. Example:
695              /checkip 35.23.43.66
696              35.23.43.66 is banned:
697              35.23.43.66 banned by Tankmaster
698                  reason: Cheaters
699
700
701       /countdown [seconds]
702              Starts the countdown sequence for a timed game.  The countdown
703              sequence length can optionally be specified in seconds.  Examples:
704              /countdown
705              /countdown 3
706
707
708       /flag reset {all|unused|team|FlagId}
709              Repositions flags. If unused is specified, flags carried
710              by tanks are not affected. Using the team option only
711              resets team flags, whereas specifying a flag id (such as GM) only
712              repositions flags of this type. If noteam is specified,
713              team flags will not be reset. Examples:
714              /flag reset unused noteam
715              /flag reset G
716
717
718       /flag show
719              Shows all flags with information. Example:
720              0: p:-1 r:1 g:1 1:V s:1 p:159.1x43.2x0.0
721              1: p:2 r:1 g:1 1:SW s:1 p:209.1x143.2x10.0
722              2: p:-1 r:1 g:3 1:L s:1 p:-29.1x301.2x0.0
723
724
725       /flag up
726              Removes all flags from the game
727
728
729       /gameover
730              Ends the current game
731
732
733       /handicap
734              Shows the handicap boost percentage for every player
735
736
737       /hostban hostpattern duration reason
738              Ban players using the specified hostnames for a certain length of time from using this server.
739              Example:
740              /hostban *.foo.com 2 cheating
741              bans all players from foo.com for 2 minutes
742
743
744       /hostbanlist
745              List all of the host patterns currently banned from this server.
746
747
748       /jitterwarn [time]
749              Change the maximum allowed jitter time. Example:
750              /jitterwarn 50
751
752
753       /jitterdrop [count]
754              Change the number of jitter warnings given before a player is kicked. Example:
755              /jitterdrop 3
756
757
758       /kick {"Player Name" | playerName | #slot} reason
759              Kick a player off the server. Example:
760              /kick Gerbol
761              You were kicked off the server by MrApathyCream
762
763              /kick #1 Team killing
764              Kick the player using slot 1 because Team Killing
765
766              Note: Slots numbers are only displayed in admins clients.
767              A reason is required
768
769
770       /kill {"Player Name" | playerName | #slot} [reason]
771              Kill a player just like when shooting. Example:
772              /kill Gerbol
773              kill the player named Gerbol
774
775              /kill #4 teamkilling
776              Kill the player using slot 4 because teamkilling
777
778
779       /lagwarn [time]
780              Change the maximum allowed lag time. Example:
781              /lagwarn 300
782
783
784       /lagdrop [count]
785              Change the number of lag warnings given before a player is kicked. Example:
786              /lagdrop 3
787
788
789       /modcount [seconds]
790              Change the time on the clock by the specified number of seconds. Example:
791              /modcount +320
792
793
794       /mute {#slot | callsign}
795              Allows a server admin to remove the ability for a player to communicate with
796              other players. Once muted the player may only talk to admins on the server.
797              This command removes the TALK permission that is enabled by default for all
798              players. (disabling TALK by default would let you run a "silent" server)
799
800
801       /packetlosswarn [time]
802              Change the maximum allowed packetloss. Example:
803              /packetloss 1
804
805
806       /packetlossdrop [count]
807              Change the number of packetloss warnings given before a player is kicked. Example:
808              /packetloss 3
809
810
811       /playerlist
812              List player names and IP addresses. Example:
813              /playerlist
814              [0]MrApathyCream: 35.23.65.44:4808 udp id
815              [1]Gerbol: 130.123.1.55:4909 udp id
816              [2]captain_macgyver: 15.32.122.51:3201 udp id
817
818
819       /record file filename
820              Start recording directly to a file
821
822
823       /record list
824              List all files in the recordings directory
825
826
827       /record rate seconds
828              Set the time between game state updates stored in the recording. This will affect
829              the granularity of the 'skips' you can do while replaying a file. It will also
830              make the recording files bigger if it is set to a faster update rate.
831
832
833       /record save filename [seconds]
834              Save the recording buffer into a file. If seconds is specified, then only save
835              that many previous seconds into the file.
836
837
838       /record size megabytes
839              Set the size of the recording memory buffer
840
841
842       /record start
843              Start recording into the memory buffer
844
845
846       /record stats
847              Display the statistics for the current recording (file or buffered)
848
849
850       /record stop
851              Stop recording into the memory buffer
852
853
854       /replay list
855              List all files in the recordings directory
856
857
858       /replay load {filename | #index}
859              Load the specified recording file by name, or by index
860              (same indices as produced by the 'replay list' command)
861
862
863       /replay loop
864              Start looping the recording. This will oftentimes require that all players connected
865              to the server rejoin  (to reload the map, etc...)
866
867
868       /replay play
869              Start playing the recording. This will oftentimes require that all players connected
870              to the server rejoin  (to reload the map, etc...)
871
872
873       /replay skip [{+ | -} seconds]
874              If seconds is specified, then skip that amount of time in the recording.
875              Otherwise, skip forwards until there is activity.
876
877
878       /replay stats
879              Show the current replay status (filename, position, etc...)
880
881
882
883       /say message
884              Generate a public message sent by the server. Example:
885              /say This is a servermessage
886
887
888       /sendhelp {"Player name" | playerName | #slot} help page
889              Send the specified help page to a user
890              /sendhelp register "Foo"
891              Send the the help page 'register' to the player Foo
892
893
894       /shutdownserver
895              Stop serving BZFlag on this server
896
897
898       /superkill
899              Kick all players off the server
900
901
902       /unmute {#slot | callsign}
903              Allows a server admin to restore the TALK permission to a previously muted
904              player.
905
906
907       /veto  If there is a poll active, this will cancel the poll.  By default, you must be
908              an admin to veto a poll.
909
910
911       /viewreports
912              View the server's report file.
913
914
915
916

USER MANAGEMENT

918       Generally,  you  start with empty files for the user and password data‐
919       bases.  These are maintained by  the  server,  and  modifiable  through
920       server commands.  Users in turn belong to groups.  Groups are generally
921       customized to perhaps allow administrative control to trusted users.
922
923       There are both local and global groups, i.e. groups that are  available
924       across the entire BZFlag network.  In setting up a server, you may want
925       to specify global groups that will allow already well known and trusted
926       users  to police your server and help maintain control against cheaters
927       and abuse.
928
929       The server will automatically create three groups: EVERYONE,  VERIFIED,
930       and   LOCAL.ADMIN.   EVERYONE   has   ACTIONMESSAGE,  ADMINMESSAGESEND,
931       CLIENTQUERY, DATE, FLAGHISTORY,  IDLESTATS,  LAGSTATS,  PRIVATEMESSAGE,
932       SHOWMOTTO,  SPAWN  and TALK by default. VERIFIED has LISTPLUGINS, POLL,
933       POLLKICK, POLLBAN, POLLKICK, POLLSET, POLLFLAGRESET, REPORT  and  VOTE.
934       The  LOCAL.ADMIN group has almost every permission possible (similar to
935       granting admin powers via /password).
936
937       Once the server is running, users can register their callsigns and  ad‐
938       mins  can  set  their group memberships. Users can use any command that
939       their permissions allow. Every user, registered or not, is part of  the
940       EVERYONE  group.  When a user identifies, they become part of the VERI‐
941       FIED group.
942
943       In addition, there  are  global  groups  available  that  persist  net‐
944       work-wide.   Users  that register their callsigns on the BZFlag website
945       at https://forums.bzflag.org/ have the ability to globally authenticate
946       by  providing  a  password from within the client.  When they authenti‐
947       cate, bzfs will ask the list server if they belong to any of the groups
948       listed in your group database file that are not prefixed with "LOCAL.".
949       If they are a member of a group in question, then they are granted  the
950       permissions you specify for that group.
951
952       A  group  database  file  is  set  up to contain the specific local and
953       global groups you care to have on your server in  addition  to  default
954       groups  and exactly which permissions are granted by each.  These files
955       are laid out with one line per group, using the following format:
956
957       GROUP_NAME: [*Group] [ +| -| !]perm1 [ +| -| !]perm2 ... permN
958
959
960       *Group: inherit permissions from existing group "Group"
961
962       +perm: add perm to this group
963
964       -perm: remove perm from this group
965
966       !perm: forbid perm for this group. makes perm inaccessible whether it's
967       granted from another group or not
968
969       If  no  operator is given with a permission it is handled like +perm. A
970       group line for a previously existing group adds to already granted per‐
971       missions.  That  way  you  can spread a group's definition over several
972       lines:
973
974       GROUP_NAME: +perm1 +perm2
975       GROUP_NAME: +perm3 +perm4 -perm5
976
977       Group names cannot have spaces, quotes, or other special characters  in
978       them.  This would be a sample line defining a "cop" group:
979
980       COPS: +KICK +SHORTBAN +BANLIST
981
982       Now  a  group  USERADMIN with all permissions granted to COPS plus some
983       additional could look like this:
984
985       USERADMIN: *COPS +BAN +UNBAN
986
987       Probably you want to define  customized  permissions  for  the  default
988       group "VERIFIED" instead of those automatically assigned by the server:
989
990       VERIFIED: -ALL +perm1 +perm2 ...
991
992       Or you want to disable the /poll command entirely?
993
994       EVERYONE: !POLL
995
996       To  distinguish  between  a group that is local and one that is global,
997       use the "LOCAL." prefix as part of the group name, e.g.:
998
999       LOCAL.OPERATOR: BANLIST
1000
1001
1002       The available permissions are as follows:
1003
1004
1005       ACTIONMESSAGE       /me
1006       ADMINMESSAGERECEIVE player receives messages sent to admin channel
1007       ADMINMESSAGESEND    player may send messages on the admin channel
1008       ALL                 all permissions available
1009       ANTIBAN             player is immune to /ban
1010       ANTIKICK            player is immune to /kick
1011       ANTIKILL            player is immune to /kill
1012       ANTIPOLL            player is immune to /poll
1013       ANTIPOLLBAN         player is immune to /poll ban
1014       ANTIPOLLKICK        player is immune to /poll kick
1015       ANTIPOLLKILL        player is immune to /poll kill
1016       BAN                 /ban /hostban
1017       BANLIST             /banlist /hostbanlist
1018       CLIENTQUERY         /clientquery
1019       COUNTDOWN           /countdown
1020       ENDGAME             /gameover
1021       FLAGHISTORY         /flaghistory
1022       FLAGMASTER          /flag
1023       FLAGMOD             /flag reset /flag show /flag history
1024       HIDEADMIN           player doesn't show the @ sign
1025       IDLESTATS           /idlestats
1026       INFO                not implemented
1027       JITTERWARN          /jitterwarn /jitterdrop
1028       KICK                /kick
1029       LAGSTATS            /lagstats
1030       LAGWARN             /lagwarn /lagdrop
1031       LISTPERMS           not implemented
1032       LISTPLUGINS         /listplugins
1033       MASTERBAN           /masterban
1034       MODCOUNT            /modcount
1035       MUTE                /mute
1036       PACKETLOSSWARN      /packetlosswarn /packetlossdrop
1037       PLAYERLIST          /playerlist
1038       PLUGINS             /listplugins /loadplugin /unloadplugin
1039       POLL                /poll
1040       POLLBAN             /poll ban
1041       POLLFLAGRESET       /poll flagreset
1042       POLLKICK            /poll kick
1043       POLLSET             /poll set
1044       PRIVATEMESSAGE      /msg
1045       RECORD              /record
1046       REJOIN              allows instant rejoin, regardless of _rejoinTime
1047       REMOVEPERMS         /removegroup
1048       REPLAY              /replay
1049       REPORT              /report
1050       REQUIREIDENTIFY     user must use global registration
1051       SAY                 /say
1052       SENDHELP            /sendhelp
1053       SETALL              use of all set/remove commands
1054       SETPERMS            /setgroup
1055       SETPASSWORD         not implemented
1056       SETVAR              /set /reset
1057       SHORTBAN            /ban (with a limited duration)
1058       SHOWADMIN           player shows an @ regardless of  having  'shortban'
1059       perm
1060       SHOWMOTTO           player  is  allowed  to  display their motto on the
1061       scoreboard
1062       SHOWOTHERS          /showgroup /showperms (on others)
1063       SHUTDOWNSERVER      /shutdownserver
1064       SPAWN               join game as a player. observers  don't  need  this
1065       flag.
1066       SUPERKILL           /superkill
1067       TALK                allows all players to send messages
1068       UNBAN               /unban /hostunban
1069       UNMUTE              /unmute
1070       VETO                /veto
1071       VOTE                /vote
1072
1073
1074       /grouplist
1075              Lists the available user groups
1076
1077
1078       /groupperms
1079              Lists the permissions for each group
1080
1081
1082       /masterban {flush | reload}
1083              Forces  the  server to flush any bans from the master server. If
1084              reload is specified instead of flush, also reloads bans from the
1085              the  internet. Local bans are unaffected.  This command requires
1086              the UNBAN permission.
1087
1088
1089       /reload
1090              Reloads the user, group, and password files (for synchronization
1091              between multiple servers on the same machine)
1092
1093
1094       /removegroup callsign group
1095              Remove a user from a group
1096
1097
1098       /setgroup callsign group
1099              Add a user to a group
1100
1101
1102       /showgroup callsign
1103              Lists the groups that a registered user is a member of
1104
1105
1106

SEE ALSO

1108       bzflag(6), bzadmin(6), bzw(5)
1109
1110
1111
1112BZFlag 2.4.26                     2023-01-18                           BZFS(6)
Impressum