1OCF_HEARTBEAT_IFACE() OCF_HEARTBEAT_IFACE()
2
6 ocf_heartbeat_iface-bridge - Manages Bridge network interfaces.
7
9 iface-bridge [start | stop | status | monitor | meta-data |
10 validate-all]
11
13 This resource manages Bridge network interfaces. It can add, remove,
14 configure bridges and spanning-tree.
15
17 bridge_name
18 Define the name of the bridge (max 15 charaters).
19 (unique, required, string, no default)
21 bridge_slaves
23 Define the list of interfaces, space separated, to add to the
24 bridge. The list can be empty.
25 (unique, optional, string, no default)
27 bridge_ageing
29 Set the ethernet (MAC) address ageing time in seconds.
30 (optional, integer, no default)
32 port_hairpin
34 Set hairpin forwarding mode. A list of ports that should have
35 hairpin enabled can be specified using the following Example: eth0
36 eth1
37 (optional, string, no default)
39 stp
41 Enable or disable Spanning Tree Protocol on the bridge.
42 (optional, boolean, default false)
44 stp_bridgeprio
46 Set the bridge's priority to defined value. The priority value is a
47 number between 0 and 65535), and has no dimension. Lower priority
48 values are preferred. The bridge with the lowest priority will be
49 elected as root bridge.
50 (optional, integer, no default)
52 stp_fd
54 Set the bridge forward delay (in seconds).
55 (optional, integer, default 0)
57 stp_maxage
59 Set the bridge maximum message age (in seconds).
60 (optional, integer, no default)
62 stp_hello
64 Set the bridge hello time (in seconds).
65 (optional, integer, no default)
67 stp_pathcost
69 Set the port cost. This is a dimensionless metric. A list of
70 port/cost can be specified using the following format: unpromoted
71 cost unpromoted cost. Example: eth0 100 eth1 1000
72 (optional, string, no default)
74 stp_portprio
76 Set the port priority. This is a number between 0 and 63. brctl man
77 page reports a value between 0 and 255, but tests show a limit of
78 63 on a live system. This metric is used in the designated port and
79 root port selection algorithms. A list of port/priority can be
80 specified using the following format: unpromoted cost unpromoted
81 cost. Example: eth0 10 eth1 60
82 (optional, string, no default)
84 multicast_router
86 Enable or disable multicast routing on the bridge.
87 (optional, boolean, default 1)
89 multicast_snooping
91 Enable or disable multicast snooping on the bridge.
92 (optional, boolean, default 1)
94 multicast_port_router
96 Enable or disable a port from the multicast router. Kernel enables
97 all port by default. A list of port can be specified using the
98 following format: unpromoted 0|1 unpromoted 0|1. Example: eth0 1
99 eth1 0
100 (optional, string, no default)
102
104 This resource agent supports the following actions (operations):
105 start
107 Starts the resource. Suggested minimum timeout: 30s.
108 stop
110 Stops the resource. Suggested minimum timeout: 20s.
111 status
113 Performs a status check. Suggested minimum timeout: 20s. Suggested
114 interval: 10s.
115 monitor
117 Performs a detailed status check. Suggested minimum timeout: 20s.
118 Suggested interval: 10s.
119 meta-data
121 Retrieves resource agent metadata (internal use only). Suggested
122 minimum timeout: 5s.
123 validate-all
125 Performs a validation of the resource configuration. Suggested
126 minimum timeout: 20s.
127
129 The following is an example configuration for a iface-bridge resource
130 using the crm(8) shell:
131 primitive p_iface-bridge ocf:heartbeat:iface-bridge \
133 params \
134 bridge_name=string \
135 op monitor timeout="20s" depth="0" interval="10s"
136
138 The following is an example configuration for a iface-bridge resource
139 using pcs(8)
140 pcs resource create p_iface-bridge ocf:heartbeat:iface-bridge \
142 bridge_name=string \
143 op monitor timeout="20s" OCF_CHECK_LEVEL="0" interval="10s"
144
146 http://clusterlabs.org/
147
149 ClusterLabs contributors (see the resource agent source for information
150 about individual authors)
151 OCF_HEARTBEAT_IFACE()