BIO_int_ctrl(3ssl)

1BIO_ctrl(3)                         OpenSSL                        BIO_ctrl(3)
2
3
4

NAME

6       BIO_ctrl, BIO_callback_ctrl, BIO_ptr_ctrl, BIO_int_ctrl, BIO_reset,
7       BIO_seek, BIO_tell, BIO_flush, BIO_eof, BIO_set_close, BIO_get_close,
8       BIO_pending, BIO_wpending, BIO_ctrl_pending, BIO_ctrl_wpending,
9       BIO_get_info_callback, BIO_set_info_callback - BIO control operations
10

SYNOPSIS

12        #include <openssl/bio.h>
13
14        long BIO_ctrl(BIO *bp,int cmd,long larg,void *parg);
15        long BIO_callback_ctrl(BIO *b, int cmd, void (*fp)(struct bio_st *, int, const char *, int, long, long));
16        char * BIO_ptr_ctrl(BIO *bp,int cmd,long larg);
17        long BIO_int_ctrl(BIO *bp,int cmd,long larg,int iarg);
18
19        int BIO_reset(BIO *b);
20        int BIO_seek(BIO *b, int ofs);
21        int BIO_tell(BIO *b);
22        int BIO_flush(BIO *b);
23        int BIO_eof(BIO *b);
24        int BIO_set_close(BIO *b,long flag);
25        int BIO_get_close(BIO *b);
26        int BIO_pending(BIO *b);
27        int BIO_wpending(BIO *b);
28        size_t BIO_ctrl_pending(BIO *b);
29        size_t BIO_ctrl_wpending(BIO *b);
30
31        int BIO_get_info_callback(BIO *b,bio_info_cb **cbp);
32        int BIO_set_info_callback(BIO *b,bio_info_cb *cb);
33
34        typedef void bio_info_cb(BIO *b, int oper, const char *ptr, int arg1, long arg2, long arg3);
35

DESCRIPTION

37       BIO_ctrl(), BIO_callback_ctrl(), BIO_ptr_ctrl() and BIO_int_ctrl() are
38       BIO "control" operations taking arguments of various types.  These
39       functions are not normally called directly, various macros are used
40       instead. The standard macros are described below, macros specific to a
41       particular type of BIO are described in the specific BIOs manual page
42       as well as any special features of the standard calls.
43
44       BIO_reset() typically resets a BIO to some initial state, in the case
45       of file related BIOs for example it rewinds the file pointer to the
46       start of the file.
47
48       BIO_seek() resets a file related BIO's (that is file descriptor and
49       FILE BIOs) file position pointer to ofs bytes from start of file.
50
51       BIO_tell() returns the current file position of a file related BIO.
52
53       BIO_flush() normally writes out any internally buffered data, in some
54       cases it is used to signal EOF and that no more data will be written.
55
56       BIO_eof() returns 1 if the BIO has read EOF, the precise meaning of
57       "EOF" varies according to the BIO type.
58
59       BIO_set_close() sets the BIO b close flag to flag. flag can take the
60       value BIO_CLOSE or BIO_NOCLOSE. Typically BIO_CLOSE is used in a
61       source/sink BIO to indicate that the underlying I/O stream should be
62       closed when the BIO is freed.
63
64       BIO_get_close() returns the BIOs close flag.
65
66       BIO_pending(), BIO_ctrl_pending(), BIO_wpending() and BIO_ctrl_wpend‐
67       ing() return the number of pending characters in the BIOs read and
68       write buffers.  Not all BIOs support these calls. BIO_ctrl_pending()
69       and BIO_ctrl_wpending() return a size_t type and are functions,
70       BIO_pending() and BIO_wpending() are macros which call BIO_ctrl().
71

RETURN VALUES

73       BIO_reset() normally returns 1 for success and 0 or -1 for failure.
74       File BIOs are an exception, they return 0 for success and -1 for fail‐
75       ure.
76
77       BIO_seek() and BIO_tell() both return the current file position on suc‐
78       cess and -1 for failure, except file BIOs which for BIO_seek() always
79       return 0 for success and -1 for failure.
80
81       BIO_flush() returns 1 for success and 0 or -1 for failure.
82
83       BIO_eof() returns 1 if EOF has been reached 0 otherwise.
84
85       BIO_set_close() always returns 1.
86
87       BIO_get_close() returns the close flag value: BIO_CLOSE or BIO_NOCLOSE.
88
89       BIO_pending(), BIO_ctrl_pending(), BIO_wpending() and BIO_ctrl_wpend‐
90       ing() return the amount of pending data.
91

NOTES

93       BIO_flush(), because it can write data may return 0 or -1 indicating
94       that the call should be retried later in a similar manner to
95       BIO_write().  The BIO_should_retry() call should be used and appropri‐
96       ate action taken is the call fails.
97
98       The return values of BIO_pending() and BIO_wpending() may not reliably
99       determine the amount of pending data in all cases. For example in the
100       case of a file BIO some data may be available in the FILE structures
101       internal buffers but it is not possible to determine this in a portably
102       way. For other types of BIO they may not be supported.
103
104       Filter BIOs if they do not internally handle a particular BIO_ctrl()
105       operation usually pass the operation to the next BIO in the chain.
106       This often means there is no need to locate the required BIO for a par‐
107       ticular operation, it can be called on a chain and it will be automati‐
108       cally passed to the relevant BIO. However this can cause unexpected
109       results: for example no current filter BIOs implement BIO_seek(), but
110       this may still succeed if the chain ends in a FILE or file descriptor
111       BIO.
112
113       Source/sink BIOs return an 0 if they do not recognize the BIO_ctrl()
114       operation.
115

BUGS

117       Some of the return values are ambiguous and care should be taken. In
118       particular a return value of 0 can be returned if an operation is not
119       supported, if an error occurred, if EOF has not been reached and in the
120       case of BIO_seek() on a file BIO for a successful operation.
121

NAME

SYNOPSIS

DESCRIPTION

RETURN VALUES

NOTES

BUGS

SEE ALSO