1Writes  the configuration into a file. If is omitted, the default
2file will be used.  Reads the configuration from a  file.  If  is
3omitted, the default file will be used.
4
5This syntax will be used for the options and
6
7All  entries are included in the section This section contains an
8entry which describes the interfaces. Each  subsection  describes
9one interface. There are the following entries possible: The name
10of the interface.  This entry is required.
11
12NAME = ippp0 Set the EAZ or the MSN.  This entry is required.
13
14EAZ = 4711 Set the incoming  phone  number(s).   It  requires  at
15least one blank between the different numbers.
16
17PHONE_IN = 08151234 08151235 08151236 Set the outgoing phone num‐
18ber(s).  It requires at least one  blank  between  the  different
19numbers.
20
21PHONE_OUT  =  08151237  08151238 Turn on or off the security fea‐
22ture.
23
24SECURE = on Selects callback mode.
25
26CALLBACK = in Turns on or off hangup before starting callback.
27
28CBHUP = on Set the callback delay to
29
30CBDELAY = 5 Set the number of dial atempts to
31
32DIALMAX = 1 Set the hanguptime to
33
34HUPTIMEOUT = 20 Turns on or off the hangup timeout  for  incoming
35calls.
36
37IHUP = on Turns on or off hangup before next charge info.
38
39CHARGEHUP = on Sets the charge interval to
40
41CHARGEINT = 1 Set the layer‐2 protocol.  Allowed values for
42
43L2_PROT = hdlc Set the layer‐3 protocol.  Allowed value for
44
45L3_PROT = trans Sets the encapsulation mode.  Allowed values for
46
47ENCAP = rawip Adds a slave interface for channel‐bundling.
48
49ADDSLAVE  =  s‐ippp0 Set the delay in seconds for the slave‐dial‐
50ing.
51
52SDELAY = 10 Set trigger level for slave‐dialing.
53
54TRIGGER = 4000 Binds the current interface to a specific physical
55channel.  Before and after the comma may not be a blank.
56
57BIND  =  teles1,0  Binds the current interface to the ippp device
58This works only for syncronous ppp.  The value must be a number.
59
60PPPBIND = 0
61
62
63[ISDNCTRL]
64  INTERFACES = {
65    [INTERFACE]
66    NAME      = isdn0
67    EAZ       = 4711
68    PHONE_IN  = 08151234
69    PHONE_OUT = 08151234
70    SECURE    = on
71    DIALMAX   = 1
72    HUPTIMEOUT= 20
73    IHUP      = on
74    CHARGEHUP = on
75    L2_PROT   = hdlc
76    L3_PROT   = trans
77    ENCAP     = rawip
78    ADDSLAVE  = s‐isdn0
79    SDELAY    = 10
80
81    [SLAVE]
82    NAME      = s‐isdn0
83    EAZ       = 4711
84    PHONE_OUT = 08151234
85    SECURE    = on
86    DIALMAX   = 1
87    HUPTIMEOUT= 10
88    IHUP      = on
89    CHARGEHUP = on
90    L2_PROT   = hdlc
91    L3_PROT   = trans
92    ENCAP     = rawip
93
94    [INTERFACE]
95    NAME      = ippp0
96    EAZ       = 4712
97    PHONE_OUT = 08151235 08151236
98    SECURE    = on
99    DIALMAX   = 5
100    HUPTIMEOUT= 200
101    IHUP      = on
102    CHARGEHUP = on
103    L2_PROT   = hdlc
104    L3_PROT   = trans
105    ENCAP     = syncppp
106    PPPBIND   = 0
107  }
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
Impressum